ADVAN A052 295/30/18 square at the track

maicol76 · 03-20-2020, 07:51 PM

tire : ADVAN A052 295/30/18 square

rim : Rays ZE40 18" / 10.5J et20 square

F : - 3.8
R : -2.3

suspension : MOTON 3way coilover(with both F & R helper springs)

no wheel spacers
no rubbing at the track

need modification.
have to bend it here by a hammer. It is easy work, and no harm to chassis.
I applied silicone after work.

AP3X_FTW · 03-20-2020, 08:11 PM

Quote:

Originally Posted by maicol76

tire : ADVAN A052 295/30/18 square

rim : Rays ZE40 18" / 10.5J et20 square

F : - 3.8
R : -2.3

suspension : MOTON 3way coilover(with both F & R helper springs)

no wheel spacers
no rubbing at the track

need modification.
have to bend it here by a hammer. It is easy work, and no harm to chassis.
I applied silicone after work.

Nice setup. What is the front spring configuration? 5" main springs + helpers?

Would love to see pictures of the car with the wheels installed.

christoepurrr · 03-20-2020, 08:20 PM

maicol76 · 03-23-2020, 01:18 AM

Quote:

Originally Posted by christoepurrr

hahaha...
I wanna delete this thread because it's worthless information, but please let me know how can I do it.

christoepurrr · 03-23-2020, 06:41 AM

Quote:

Originally Posted by maicol76

Quote:

Originally Posted by christoepurrr

hahaha...
I wanna delete this thread because it's worthless information, but please let me know how can I do it.

I think we'd rather see some pictures vs the thread being deleted

Bartledoo · 03-26-2020, 02:28 AM

Yea, definitely want to see photos as I'm thinking about running this setup for GTA in June if they don't corona cancel it. More details on what you hammered would be nice too. I can't tell what is going on in the photo.

Aff3nkopf · 04-13-2020, 05:02 PM

Can you show us what exactly need to be modified? I think the tyres grinding at the chassis is quite common. I had it with my BBS E88 and 265/30 front setup which is why I sold the rims.

Quote:

Originally Posted by maicol76

tire : ADVAN A052 295/30/18 square

rim : Rays ZE40 18" / 10.5J et20 square

F : - 3.8
R : -2.3

suspension : MOTON 3way coilover(with both F & R helper springs)

no wheel spacers
no rubbing at the track

need modification.
have to bend it here by a hammer. It is easy work, and no harm to chassis.
I applied silicone after work.

Kelse92 · 04-13-2020, 05:11 PM

Quote:

Originally Posted by Bartledoo

Yea, definitely want to see photos as I'm thinking about running this setup for GTA in June if they don't corona cancel it. More details on what you hammered would be nice too. I can't tell what is going on in the photo.

It looks to me like that spot where the tire normally clearances the fender liner on some bigger setups and tends to also rub the metal there. Always wondered if it was a super critical point in the chassis, but looks like he was able to get it bent down a bit here with no ill effects.

tdott · 04-13-2020, 09:41 PM

Quote:

Originally Posted by Aff3nkopf

Can you show us what exactly need to be modified? I think the tyres grinding at the chassis is quite common. I had it with my BBS E88 and 265/30 front setup which is why I sold the rims.

Once you take the fender liner off you'll see it. It's just a small lip.

03-20-2020, 07:51 PM	#1
maicol76 First Lieutenant 194 Rep 304 Posts Drives: E92 M3 Join Date: Oct 2011 Location: CA, Santa fe iTrader: (0)	ADVAN A052 295/30/18 square at the track tire : ADVAN A052 295/30/18 square rim : Rays ZE40 18" / 10.5J et20 square F : - 3.8 R : -2.3 suspension : MOTON 3way coilover(with both F & R helper springs) no wheel spacers no rubbing at the track need modification. have to bend it here by a hammer. It is easy work, and no harm to chassis. I applied silicone after work. Attached Images __________________ 2011 LCI W/DCT / K&N drop in filter / CSF radiator / do88 oil cooler / do88 DCT cooler / Akra Evo / Moton CS 2 way coilover / Wiechers strut bar(F) / ARC strut bar(R) / Alcon Superkit BBK / Tarox rotor / Geoff steel EHPS / Sard carbon-Kevlar GT wing / GT4 carnard / Aim Evo4+G-dash+GT Steering+S/C GP HD / Bride Zeta3 / etc.
	Appreciate 0 Tweet Quote

03-20-2020, 08:20 PM	#3
christoepurrr Lieutenant 154 Rep 443 Posts Drives: BMW M3 Join Date: May 2015 Location: So. Cal iTrader: (2)
	Appreciate 1 b4hand661.00 Quote

03-26-2020, 02:28 AM	#6
Bartledoo Driver 2692 Rep 2,714 Posts Drives: 2011 E90 M3 6MT Join Date: Aug 2015 Location: Seattle, WA iTrader: (0) Garage List 2023 Corvette Stingray [0.00] 2002 Porsche Boxster [0.00] 2011 E90 M3 [0.00] 2021 Tesla Model Y [0.00]	Yea, definitely want to see photos as I'm thinking about running this setup for GTA in June if they don't corona cancel it. More details on what you hammered would be nice too. I can't tell what is going on in the photo. __________________ E90M 6MT Slicktop Single Humper in need of a diet
	Appreciate 0 Quote