FS: Full Interior Part-out - Excellent Condition - So Cal

[AP3X_FTW]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Hello all, I recently converted my VERY clean (honestly too clean for a track/race build) E92 M3 to a full track/race car, therefore just about everything in the interior is out of the car and up for sale with the exception of the dash and the front portion of the center console.

I took my time stripping the interior, so all panels were properly removed to prevent any damage from occurring. All pins, screws, brackets, pop rivets etc. are intact as they should be unless otherwise noted. There are certain things that I am going to try to group together as I do not want to get stuck with partial interior parts.

* If it is listed, it is still for sale. If I don't have something listed, then I don't have it for sale.

* Everything is coming out of a 2011.5 E92 M3 coupe

* Prices lowered again on 12/26/2020

Location: Irvine, CA (Orange County)
Shipping: No problem. Buyer pays.
-----------------------------------------------------------------------


Black Nappa Rear Leather Seats - Upper & lower 60/40 split seats with headrests (no side bolsters)
Lowered to $250

Rear side panels with armrests (does not include speakers or trim)
Lowered to $150

Rear dome reading light panel (includes light bulbs)
Lowered to $45

A pillars including airbag caps (black)
Lowered to $60

C pillars (black)
Lowered $60

Front center console ashtray (black, no cig lighter)
Lowered to $25

Front driver and passenger 3 point seatbelts, receptacles, lower mounting posts and all associated hardware (black)
Lowered to $100

Rear seat belts, tensioners, receivers and all associated hardware (black)
Lowered to $100

Rear seat belt tensioner plastic covers (black)
Lowered to $25

Rear parcel shelf/deck with sound deadening and rear vent piece (black)
Lowered to $125

Passenger dash airbag
Lowered to $55

Airbag control unit
Lowered to $55


Photo's:


Black rear side panels (front's sold)




Black Nappa rear 60/40 split seats and headrests (side bolsters not included)




Rear dome reading light panel (with light bulbs)




A pillars w/ airbag caps






C pillars w/ airbag caps






Front center console ashtray and cigarette lighter




Front seat belts, tensioners, floor mounting brackets, hardware, etc.




Rear seat belts, tensioners, receivers, hardware, etc.




Rear seat belt tensioner plastic covers






Main airbag control unit

[EJT86]

How much for the drivers A pillar cover?

[rantarM3]

Are you selling the in-dash cupholders by any chance?

[AP3X_FTW]

Originally Posted by EJT86

How much for the drivers A pillar cover?

For now, I am going to try to sell the A pillar covers as a pair. $75 takes them including the airbag caps. (new from ECS is $82 each which does not include the airbag caps)

Originally Posted by rantarM3

Are you selling the in-dash cupholders by any chance?

I am actually going to keep the cup holders for now, as I do find myself holding a coffee or water often and would have nowhere to put it

[mylesg69]

mats still available, as well as coat hanger?

[M_Thrizzle]

Do you have a rearview mirror with Homelink?

[M_GODZILLA]

Interesting in Non-sunroof headliner (black)
DM sent

[AP3X_FTW]

Originally Posted by mylesg69

mats still available, as well as coat hanger?

Mats and coat hanger are both still available.

Originally Posted by M_Thrizzle

Do you have a rearview mirror with Homelink?

I will be keeping the mirror for now, but may decide to remove it as well. I'll PM you if that happens.

Originally Posted by M_GODZILLA

Interesting in Non-sunroof headliner (black)
DM sent

Thank you. I'll return the PM.

[JayyLebron]

If you are ever willing to split the door cards from everything, let me know! GLWS.

[AP3X_FTW]

Originally Posted by JayyLebron

If you are ever willing to split the door cards from everything, let me know! GLWS.

Copy that, I'll keep you posted and thank you for your interest.

[MShift]

Center spring loaded cup holder unit for sale? If so I'll take it.

[AP3X_FTW]

Originally Posted by MShift

Center spring loaded cup holder unit for sale? If so I'll take it.

The dash is staying intact as of today, but If I decide to remove the cup holders I'll let you know.

[MShift]

Originally Posted by AP3X_FTW

The dash is staying intact as of today, but If I decide to remove the cup holders I'll let you know.

Please do! Thanks

[thompsac25]

Willing to sell just the rear console trim and lid? (The vent piece trim)

[AP3X_FTW]

Originally Posted by thompsac25

Willing to sell just the rear console trim and lid? (The vent piece trim)

You have PM.

[Boosted_M3]

Hi,
I am looking for a set of the carbon leather interior trim pieces if you are willing to sell separately.

[AP3X_FTW]

Originally Posted by Boosted_M3

Hi,
I am looking for a set of the carbon leather interior trim pieces if you are willing to sell separately.

Returned your PM.

[eduardomi]

Interested in the rear console and floor mats. Can you PM price for both?

Thanks

[UncleShrek]

Price of arm rest shipped to 77346

[AP3X_FTW]

Originally Posted by eduardomi

Interested in the rear console and floor mats. Can you PM price for both?

Thanks

Originally Posted by UncleShrek

Price of arm rest shipped to 77346

Thanks for the interest guys, PM'd both of you.

[Hujan]

Great FS thread. This is how it's done!

Very interested in the driver's side arm rest if it's in good condition and you're willing to part. (Looks like a guy above me is willing to take the door cards separately.)

[AP3X_FTW]

Originally Posted by Hujan

Great FS thread. This is how it's done!

Very interested in the driver's side arm rest if it's in good condition and you're willing to part. (Looks like a guy above me is willing to take the door cards separately.)

Appreciate it. I am going to keep the front door armrests with the door cards for right now. I'll reach out if I decide to split things up.