|
|
08-17-2013, 03:23 AM | #1 |
Captain
22
Rep 631
Posts |
Dinan fixed camber plates + KW V3
Does not seem to be a common combo since most members either run the Dinan fixed plates with the original Dinan setups or the aftermarket coilover guys usually run the adjustable plates ala Vorshlag, GC, TCK etc..
I have searched and was only able to find one thread in which a member stated they ran this combo with no problems.. (http://www.m3post.com/forums/showthread.php?t=690349) To my understanding the plates were designed for OE style springs which the Dinan and KW V3 springs also are.. Would love to get a few more assurring responses so I wont be buying plates that wont fit... TIA |
08-17-2013, 09:50 AM | #2 | |
Captain
22
Rep 631
Posts |
Quote:
Part of the reason I am considering the plates is also because of my aggressive front fitment My camber is currently 1.5 up front... I am hoping to get around the 2.0 zone to benefit from the increased performance and also eliminate possible rubbing + improve the visual aspect of my stance.. (I dont need a whole lot so hence I wont be needing the larger range of the adjustable plates + the possible NVH) So I guess your setup can confirm that the Dinan fixed plates are indeed compatible with the V3? Last edited by BIU; 08-17-2013 at 09:57 AM.. |
|
Appreciate
0
|
08-17-2013, 10:09 AM | #3 | |
Captain
22
Rep 631
Posts |
Quote:
Just sucks that I'll have to pull the front shocks out again now for the camber plates... get another alignment done etc... Guess sometimes you just gotta do what you gotta do... Good to hear the Dinan plates will work since they will offer me the camber range I need... no NVH... plus cheaper than the adjustable plates |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|