Help with coding bucket seat

[asma123]

Hi, I’m helping a friend code bucket seat (driver side only). Passenger side is untouched. Airbag light is on and codes are:
0093C0 seat position sensor, passenger
0093AF active head restraint, right

I followed the following coding procedure:
1. Add +RECA to the car's VO -Recaro Seats
2. Ensure all the following are set to nicht_aktiv in ABG module:
SIDEBAG_LINKS_1 -Side Airbag (left)
SIDEBAG_RECHTS_1 -Side Airbag (right)
AKS_LINKS_1_CD -Active head restraint (left)
AKS_RECHTS_1_CD -Active head restraint (right)
OC3_1 -Seat occupancy mat
GK/OC3/POL -Not sure exactly but related to the occupancy mat
GURTKONTAKT_BEIFAHRER_1 -Seat belt contract/connection (passenger)
GURTKONTAKT_FAHRER_1 -Seat belt contract/connection (driver)
GURTSTRAFFER_BEIFAHRER_1 -Seat belt tensioner, active restraint (passenger)
GURTSTRAFFER_FAHRER_1 -Seat belt tensioner, active restraint (driver)
SPSBF_1 -Seat position sensor (passenger)
SPSF_1_CD -Seat position sensor (driver)

Everything that said passenger or right side I left as active.
Any suggestions as to what would I need to do either unplug or code out to active/non active? Thanks in advanced!

essentially these are my current settings:

1. Add +RECA to the car's VO -Recaro Seats - done

SIDEBAG_LINKS_1 -Side Airbag (left) - nich_aktiv
SIDEBAG_RECHTS_1 -Side Airbag (right) - Aktiv
AKS_LINKS_1_CD -Active head restraint (left) - Nicht_aktiv
AKS_RECHTS_1_CD -Active head restraint (right) - Aktiv
OC3_1 -Seat occupancy mat - Aktiv
GK/OC3/POL -Not sure exactly but related to the occupancy mat - Aktiv
GURTKONTAKT_BEIFAHRER_1 -Seat belt contract/connection (passenger) - Aktiv
GURTKONTAKT_FAHRER_1 -Seat belt contract/connection (driver) - Nich_aktiv
GURTSTRAFFER_BEIFAHRER_1 -Seat belt tensioner, active restraint (passenger) - Aktiv
GURTSTRAFFER_FAHRER_1 -Seat belt tensioner, active restraint (driver) - Nich_aktiv
SPSBF_1 -Seat position sensor (passenger) - Aktiv
SPSF_1_CD -Seat position sensor (driver) - Nich_aktiv

[Jerezblack.m3]

I had the same problem. I have a recaro only on the driver side. You would need to reset it back to factory and only code out those 2 that popped up. No need to disable everything else.

[amg6975]

Seat occupancy mat is only on the passenger side. If the passenger seat is stock it will see that the mat is there, but it's coded off, and revert the coding back to aktiv and likely throw a code. Same goes for the seat belt connector and tensioner. You need to ONLY touch the driver's seat parameters.