FS: MCS 2WR complete setup

craz azn · 03-29-2024, 03:09 PM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Regrettably selling my recently acquired setup. Motion Control Suspension 2 way remote reservoir system for e9x M3. These are freshly rebuilt by MCS this past month, and can provide receipt. Included is the complete setup which consists of two sets of springs, one for stock rear spring setup, and one for true coilover rear, ground control camber plates, helper springs, all spring perches, front strut sleeves, rebound adjustment knobs, reservoir canister holders, solid rear upper mounts, and brand new nitrogen inflation/adjustment tool. Price for complete setup $6500.

m3_ultra · 11-06-2024, 12:14 PM

long shot but, are these still available .. ?

craz azn · 11-06-2024, 02:57 PM

Yes still have them. Shoot me a PM with any questions. Thanks.

m3_ultra · 11-06-2024, 11:48 PM

My profile here is unable to PM because of its age. I think I found you on Instagram though and sent a message!

craz azn · 03-18-2025, 10:37 AM

Bump it up! Lets get these things sold!

I've since rebuilt the rear spring perches with new bearings, and had them replated in yellow zinc. Everything has been cleaned and looked over. New bearings also installed in the lower rear damper eyelet mounts, so now everything is fresh.

New pictures of everything laid out, as of last month. Any questions, feel free to PM me. Thanks.

craz azn · 09-29-2025, 10:36 AM

Bump it up! PM with offers. Thanks!

craz azn · 11-04-2025, 09:24 PM

Sold!

03-29-2024, 03:09 PM	#1
craz azn Registered 65 Rep 61 Posts Drives: '87 M3, '06 325i Join Date: Oct 2011 Location: Ontario, Canada iTrader: (0)	FS: MCS 2WR complete setup BIMMERPOST / Classifieds Asking Price: None Item Interest Regrettably selling my recently acquired setup. Motion Control Suspension 2 way remote reservoir system for e9x M3. These are freshly rebuilt by MCS this past month, and can provide receipt. Included is the complete setup which consists of two sets of springs, one for stock rear spring setup, and one for true coilover rear, ground control camber plates, helper springs, all spring perches, front strut sleeves, rebound adjustment knobs, reservoir canister holders, solid rear upper mounts, and brand new nitrogen inflation/adjustment tool. Price for complete setup $6500. Last edited by craz azn; 03-18-2025 at 10:08 AM..
	Appreciate 2 JobanM114.00 a5m1593.50 Tweet Quote

11-06-2024, 12:14 PM	#2
m3_ultra Mig 77 Rep 28 Posts Drives: e92 M3 Join Date: Nov 2024 Location: Guelph, Canada iTrader: (0)	long shot but, are these still available .. ?
	Appreciate 0 Quote

11-06-2024, 02:57 PM	#3
craz azn Registered 65 Rep 61 Posts Drives: '87 M3, '06 325i Join Date: Oct 2011 Location: Ontario, Canada iTrader: (0)	Yes still have them. Shoot me a PM with any questions. Thanks.
	Appreciate 0 Quote

11-06-2024, 11:48 PM	#4
m3_ultra Mig 77 Rep 28 Posts Drives: e92 M3 Join Date: Nov 2024 Location: Guelph, Canada iTrader: (0)	My profile here is unable to PM because of its age. I think I found you on Instagram though and sent a message!
	Appreciate 0 Quote

03-18-2025, 10:37 AM	#5
craz azn Registered 65 Rep 61 Posts Drives: '87 M3, '06 325i Join Date: Oct 2011 Location: Ontario, Canada iTrader: (0)	Bump it up! Lets get these things sold! I've since rebuilt the rear spring perches with new bearings, and had them replated in yellow zinc. Everything has been cleaned and looked over. New bearings also installed in the lower rear damper eyelet mounts, so now everything is fresh. New pictures of everything laid out, as of last month. Any questions, feel free to PM me. Thanks. Attached Images
	Appreciate 2 panda-R387.00 bimmergixxer56.50 Quote

09-29-2025, 10:36 AM	#6
craz azn Registered 65 Rep 61 Posts Drives: '87 M3, '06 325i Join Date: Oct 2011 Location: Ontario, Canada iTrader: (0)	Bump it up! PM with offers. Thanks!
	Appreciate 0 Quote

11-04-2025, 09:24 PM	#7
craz azn Registered 65 Rep 61 Posts Drives: '87 M3, '06 325i Join Date: Oct 2011 Location: Ontario, Canada iTrader: (0)	Sold!
	Appreciate 0 Quote