|
|
08-10-2021, 02:17 AM | #1 |
New Member
4
Rep 22
Posts |
Custom Ride Height Spacers for Vorschlag Camber Plates
Vorshlag BMW E82 1M/E9x M3 Camber/Caster Plates & OEM Perches (EDC Struts) SOLD Swift Spec-R Sport Springs SOLD Custom Ride Height Spacers This is kind of a weird one, probably not a large market for these but I thought I'd throw them up anyway since I don't need them anymore. When I installed the Swift springs I wasn't after the height drop, just the extra spring rate since I was bottoming the tires on the top of the front fender wells at certain tracks. The Swift springs are supposed to drop the front 1" (I measured 0.875"), and the rears 0.7" (I measured 0.6"). The spacers result in a total drop of 0.375" at the front and 0.3" at the rear when combined with the Swift springs. The front spacers will only work with the Vorshlag camber plates. Make me an offer? Last edited by letsgopaddle; 08-13-2021 at 10:16 PM.. |
08-12-2021, 01:35 AM | #5 |
New Member
4
Rep 22
Posts |
Yeah they were starting to show some play and make some noise. I suspect all camber plates that use spherical bearings wear them out fairly quickly, these types of bearings are primarily meant to be loaded radially, so the axial loading beats the PTFE liner out pretty fast. I bought Vorshlag because they claim to use the biggest bearings, but it's still not ideal.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|