|
|
04-21-2020, 09:25 AM | #1 |
Second Lieutenant
64
Rep 250
Posts |
Steering angle sensor issue
Hello, I've been having this issue with my steering sensor. For some reason all 4 messages pop up. ABS, DSC, EDC Malf, Start Stop. When I would plug it into Carly it told me the back right steering sensor is the issue. So I went ahead and changed that one after a while a driving the light came back. For some reason when I would turn left that's when the lights on the dash would appear most. So then I decided to change the back left and see if that helped...we'll once again it didn't work and these codes came back up.
I've looked at other posts and don't really know what else my issue can be. I'm just hoping it's not my wheel bearings because I heard the rears are a pain in the Anybody have an idea of what it may be? |
04-21-2020, 06:37 PM | #3 |
Second Lieutenant
64
Rep 250
Posts |
|
Appreciate
0
|
04-21-2020, 08:17 PM | #4 |
Captain
368
Rep 935
Posts |
first i would pull up status requests of all four wheel speed sensors. drive car, make sure all are giving some sort of reading. if the right rear shows 0 when driving looks like you have a faulty reluctor wheel which is incorporated into the wheel bearing. if all speed sensor values are ok, then try calibrating steering angle sensor.
|
Appreciate
1
E92Gok63.50 |
Post Reply |
Bookmarks |
|
|