Dinan Carbon Fiber Cold Air Intake

[2K11SGCoupe]

BIMMERPOST / Classifieds

Asking Price:

USD 700.00

Shipping Costs Included

Location:

✓ Will Ship

Item Interest

Dinan has developed the High Flow Carbon Fiber Intake for the BMW E9x M3 to improve air flow to the engine. Dinan's intake is built with the highest quality components and improves the look and performance of your M3 engine with a beautiful carbon fiber connecting pipe and injection molded rubber boots. This intake is sealed tightly from the high temperatures found under the hood by utilizing a Dinan injected molded divider plate with integral high flow passage that engages into the stock air box housing. Carbon fiber and plastic were chosen because they are good insulators and have been designed to have a lower mass allowing them to cool off faster than the stock components. This insulating characteristic and rapid cooling after hard acceleration reduce heat in the air intake track when compared to metal air Intakes. The integrated divider and carbon fiber intake connecting pipe have 30% more cross sectional area. This increased area when combined with a high flow filter, ensure maximum air flow for your M3 V8 engine.

Benefits:
• Aircraft quality "prepreg" carbon fiber
• 30% more cross sectional area than stock
• Less prone to heat soak
• More air available to the engine
• Increased engine output across the power band
• Max. gain of 8 horsepower and 5 lb-ft torque @ 8200 rpm
• Large free flowing cotton gauze type air filter

Perfect condition. No scratches or anything on the CF intake tube. Comes with all hardware.

These sell for $1029 on DINAN's website + shipping: https://www.dinancars.com/product/d7...ries&mid=1114/

Asking price is $700 shipped OBO inside US.
Contact Kurt at 813 417 0250 or kep2005verizon.net with questions.

[2K11SGCoupe]

Bump TTT

[cmichaelo]

Still available and at what price?