![]() |
|
|
| 04-26-2017, 08:25 PM | #1 |
|
Captain
![]() ![]() ![]() ![]()
245
Rep 832
Posts |
Evolve Backfire Tune Problems
I have been going back and forth with evolve testing out different files because the initial backfire tune had no effect on my car. After 5 different files i noticed my car had two error codes for the pre-cat o2 sensors.
Evolve said that the o2 sensors were definitely the problem so i cleared the codes and they didn't come back for 200 miles. I tested the same file again with the same o2 sensors and it did not produce an overrun... Today I replaced them both and using the same file and it still had no overrun, just backfires on downshifts. If anyone has had a similar issue please chime in. Thanks my car is fully catless* |
| 04-26-2017, 09:57 PM | #3 | |
|
Captain
![]() ![]() ![]() ![]()
245
Rep 832
Posts |
Quote:
I'm sure that there is a small error somewhere because there are videos of a few e9x overrunning with this tune. |
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|