Requesting help with codes

[KFN]

Hi guys,

I'm hoping someone with more knowledge than me can help tell me what this might mean. I'm getting a slew of warnings from the dash (DSC, Engine Malfunction, Increased Emissions, Service light) and limp mode every time I drive the car, usually right at start up but also once a few miles after clearing the codes.

This also happened a few months back. I tried rebuilding the throttle actuators with Odometer Gears, which seemed to do the trick - no codes until just now.

These are the codes I'm getting with my Carly Adapter:

1. Motor Control, Engine/Motor

- Electronic throttle control: check start 0027A1

- check at lower top 002B57

2. ABS/DSC/Brake, Dynamische Stabilitaets Kontrolle/DSC

- Engine torque is not adjustable CAN 005E19

Based on what I've read here on the forum, my suspicion is the actuators again (presumably the electronics). I hate to outright replace them if the codes could be pointing to something else - any ideas? I'm not against taking the car to the shop/dealer, but my fear is they will simply start a costly process of elimination. Thoughts regarding this logic are welcome as well.

Thanks, as always, for the help.

[vsix]

Originally Posted by KFN

Hi guys,

I'm hoping someone with more knowledge than me can help tell me what this might mean. I'm getting a slew of warnings from the dash (DSC, Engine Malfunction, Increased Emissions, Service light) and limp mode every time I drive the car, usually right at start up but also once a few miles after clearing the codes.

This also happened a few months back. I tried rebuilding the throttle actuators with Odometer Gears, which seemed to do the trick - no codes until just now.

These are the codes I'm getting with my Carly Adapter:

1. Motor Control, Engine/Motor

- Electronic throttle control: check start 0027A1

- check at lower top 002B57

2. ABS/DSC/Brake, Dynamische Stabilitaets Kontrolle/DSC

- Engine torque is not adjustable CAN 005E19

Based on what I've read here on the forum, my suspicion is the actuators again (presumably the electronics). I hate to outright replace them if the codes could be pointing to something else - any ideas? I'm not against taking the car to the shop/dealer, but my fear is they will simply start a costly process of elimination. Thoughts regarding this logic are welcome as well.

Thanks, as always, for the help.

Heres an copy and paste I found on this forum
*
Please remember the in-App help request session log file feature!
Send an help request towards Carly headquarters in munich, directly from your app!
Certified engineers and mechanics will take care of you and sort out the problem with you for you...for free ( as long as you own the Carly Pro app version )
*

Worked like a charm for me, superfast professional response!

[KFN]

Thanks, vsix!

I had forgotten about that feature. I just sent a report, so hopefully they can shed some light on the situation.