|
|
09-03-2015, 05:36 PM | #1 |
Banned
544
Rep 1,337
Posts
Drives: Round n' Round
Join Date: Sep 2012
Location: Paradise
|
Tie Rod Arm bolts Torque Value Request?
Could anyone provide me with the torque value for the Tie Rod Arm bolts for that you loosen for adjusting the tie rods? I got an alignment set up tomorrow at an indy allignment shop and the guy did not know the tie are torque value last time.
|
09-03-2015, 10:19 PM | #2 |
Retired Curmudgeon
3122
Rep 4,226
Posts |
I think it's 25Nm, but I don't have any objective evidence that's correct.
__________________
'19 X3 M40 Carbon Black/Oyster, '21 X7 40i AW/Black, Past BMWs: '18 M550i, '18 330 GT, '16 X5 40e, '11 E90M3, '06 X5 4.4, '03 330i ZHP, '02 M3, '97 Z3 2.8, '95 M3 (2x), '94 530i (manual), '92 525i (manual), '88 M3, '87 325iS |
Appreciate
0
|
09-04-2015, 09:52 PM | #4 |
Major
115
Rep 1,470
Posts |
Clack clack clack on the 3/8 electric impact. Whatever torque that is. I adjust them all the time and never replace the bolt but have two spare bolts in my tool box at the track.
__________________
Stoptech 380mm/355mm | PFC08 / Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | MCS 2-way with 700/1000lb springs | Solid bushings and adjustable links | RD front swaybar | Apex EC-7 18x10 square 275/35-18 NT01 | Turner Race Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Alekshop Oil Cooler | Performance Steering Wheel | | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit Pro | Turner Steering Rack Stops | Vorshlag Camber Plates
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|