 |
|
 |
|
|
|
|
  KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
|||||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 07-22-2013, 06:05 PM | #1 |
|
Captain
 
85
Rep 781
Posts |
No rub? Which tires for 18x9.5 ET20 rear & 18x10.5 ET25
Time to run new wheels on the car and switch up a bit.
I'm looking to run 18x9.5 ET20 rear and 18x10.5 ET25 rear. Right now, my car is on stock oem suspensions, but plan on KW v3 or KW sleeve kit. If I do suspensions, I'm not going to be slamming them since this car is my daily driver. What tire size can I run without rubbing?  |
| 07-23-2013, 05:14 PM | #2 |
|
Captain
85
Rep 781
Posts |
Wheels will be arriving soon, was hoping someone can help me with tires.
|
|
Appreciate
0
|
| 07-23-2013, 05:21 PM | #3 |
|
Major General
 
2739
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
265/35/18 front and 285/35/18 rear
I prefer 275/35/18's in the front but there is some potential for rubbing without proper camber. You have not gotten responses because this information is readily available on the forum. Plus you didn't ask nicely  Tons of people run those same wheel sizes. Here is a thread dedicated to wheel / tire sizing, offsets, suspension settings and rubbing: http://www.m3post.com/forums/showthread.php?t=522139
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
|
Appreciate
0
|
| 07-24-2013, 04:10 PM | #4 |
|
Captain
85
Rep 781
Posts |
Sounds like that's the way to go.. This should also be good if I decide for a moderate drop on KW right?
Thanks for all your help! |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
