|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
01-19-2021, 03:19 PM | #1 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Mobil 1 10w-60, anyone tried it or know anything about it?
I came across Mobil 1 10w-60 shopping for 10w-60 oil, only saw it mentioned in a few threads at the UK m3cutter forum, none here (0w-40/5w-50 aside).
Looking at it's specs it seems to be slightly better than the Castrol 10w-60! (wider VI, so slightly thinner when cold), sulphur content is slightly higher though, not sure what that entails? Couldn't find the HTHS for the Castrol though, anyone know what it is? (and if so, where you found it) [update] apparently it's 5.2, see my post here for more info. Mobil 1's 10w/60 VI works out to 174. 10 lts (2x5) of Mobil 10w-60 I can get for £91 from Opie oils [edit, got it from the RAC for £80 delivered in the end!] 10 lts (2x8 + 2x1) of Castrol 10w-60 is £124 (from Opie and an ebayer) Am I missing something here? Something wrong with Mobil?? AFAIK Mobil is a really good make of oil right? (Oh, yes I know the Mobil was never approved by BMW ) PS Sticking to 10w-60 as I'll be replacing bearings with custom mixed & measured ACL ones (hopefully next month!). And hence 10 lts, not 9. Helmsman I saw you replied to one of the m3cutter threads (yrs ago, lol), you thought they were talking about 0-40, they weren't, they were talking about 10-60 .
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 04-18-2023 at 03:51 PM.. |
01-19-2021, 09:11 PM | #2 |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
M1 10W60 is not available in the USA - as far as I can tell, which probably contributes to the lack of dialog about the M1 10W60 product on the forums. It seems pretty good, and even has 1300ppm zinc for added wear protection.
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
Last edited by DrFerry; 01-20-2021 at 01:30 PM.. Reason: Added ZDDP ppm Info |
Appreciate
3
|
01-20-2021, 02:41 PM | #3 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Thanks, interesting, that extra Zinc isn't going to hurt the cats is it?
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. |
Appreciate
1
DrFerry6748.00 |
01-20-2021, 04:45 PM | #4 |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
Zinc ppm vs. Cats
It's a good question. Certainly high levels of phosphorus can coat the catalytic converter(s) but how high ppm is too high for either phosphorus or zinc? If we look at the October 2019 edition of the Mobil 1 Product Guide (attached) we can see the zinc and phosphorus parts per million (ppm) for the M1 oils sold in the USA.
The M1 15W50 has 1300 ppm of zinc and the M1 5W50 FS X2 (that I used to run before moving to BE Bearings) has 1100 ppm of zinc. In summary, I don't know how much zinc ppm is too high to damage catalysts with long term use, but I'll bet the oil companies do, because the M1 Racings oils listed are in the ~1800 zinc ppm levels. See screenshot and M1 Product Guide attached below.
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
|
Appreciate
2
Assimilator1615.50 ///M Power-Belgium68556.00 |
01-20-2021, 08:18 PM | #5 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Nice one, thanks
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. |
Appreciate
1
DrFerry6748.00 |
01-22-2021, 05:53 AM | #6 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
I've only just noticed that the 15w-50 has the same zinc level as the 10w-60, any idea if the 15w-50 is used by any manufacturers for road cars?
That said, your snippet there shows road going Porsche's up to '98, which have cats, so the zinc level should be ok? Oh and where did you find the Mobil 10w-60 zinc info?
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. |
Appreciate
0
|
01-22-2021, 04:41 PM | #7 | |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
Quote:
https://www.jmgshop.com/engine-oil--...urbo-102-c.asp
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
|
|
Appreciate
2
Assimilator1615.50 ///M Power-Belgium68556.00 |
01-28-2021, 11:15 AM | #8 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Update, apparently the HTHS of Castrol edge professional is 5.2 (so the Mobil 1 is better there too![edit Mobil 1 extended life is 5.7, the plain Mobil 1's isn't stated]), the rest of the specs are the same as the non pro version, are they the same oils?
Anyone know? [edit] Looks like it
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 02-13-2022 at 07:55 AM.. |
Appreciate
1
DrFerry6748.00 |
01-28-2021, 11:28 PM | #9 |
Discharged
142
Rep 160
Posts |
I imported a good bit of a couple years back and have been using it. It runs a little better than all but the BMW branded 10w60. Warms up slow, but very cold starts are more quiet. Consumption is the lowest of all that I’ve used including on the track. Car doesn’t seem to pull as hard in the too end, which makes sense given the superior HTHS that MAY be causing more parasitic drag. All observations are obviously subjective here.
|
Appreciate
1
Assimilator1615.50 |
01-30-2021, 07:02 AM | #10 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Thanks for you input, good to hear.
************************ Regarding my question on Sulphur, I found this useful article. The main points: ' Historically sulfur when used in lubricating oil formulation chemistry it has been used as an additive for an antioxidant, part of antiwear (AW) compounding, extreme pressure (EP), and enhanced lubricity properties (the oil's ability to lubricate under boundary metal-to-metal contact conditions). Emission regulations in engine oils represents the area of most change in limiting the amount of sulfur allowed in today’s lubricants. Reduction in fuels and engine oil has impacted lubricating properties required for fuel injectors and other engine components by reducing the lubricity properties in these products. This requires new additive chemistry to fill the performance requirements in these products. Also, since sulfur acts as an effective antioxidant alternatives are more in demand. ...... The reduction in sulfur using Groups II or III base oil, which are in wide use, does have the advantage of allowing formulators to control the level and type of sulfur additive compounding in the finished lubricant product. This also reduces the presence of active sulfur in the base oils which can form acids with the presence of moisture and other chemicals. It seems high levels of sulphur are bad news for cats, but seeing as Mobile one meets or exceeds ACEA A3/B3, A3/B4 spec, it can't be at problem levels. (Btw, it only has about 8% more sulphur than the Castrol).
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 01-30-2021 at 07:29 AM.. |
Appreciate
1
DrFerry6748.00 |
02-25-2021, 01:13 PM | #11 |
Lieutenant Colonel
1549
Rep 1,505
Posts |
Regarding SA levels, that is super high for direct injection engine. However, S65 is not direct injection, so no worries there. Mobil1 across the range of their Euro oils that are High-SAPS have very high sulfated ash, much higher than competition. Their additive package is super strong, where it is actually a problem for direct injection cars (CBU).
Zinc level will not be an issue as long as your vehicle is not burning oil. Higher levels of ZDDP is there for track use. Both 15W50 and 10W60 are per Mobil1 track oil. 15W50 is in US recommended by GM to use on track in Corvettes. |
Appreciate
2
Assimilator1615.50 DrFerry6748.00 |
02-25-2021, 01:41 PM | #12 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
I don't know about across their range of euro oils, but the Mobil 1 10w/60 has SA that's only 8% higher than the Castrol 10w/60.
Good to know about the zinc level, although I've no idea how much oil, if any that mine burns, except in the less than 1k miles I have driven it it didn't seemed to have used any. What's the issue with SA and DI? (and what's CBU stand for?)
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 02-28-2021 at 01:05 PM.. |
Appreciate
1
DrFerry6748.00 |
02-26-2021, 12:38 PM | #13 | |
Lieutenant Colonel
1549
Rep 1,505
Posts |
Quote:
Carbon Build Up (CBU). Sulfated ash and phosphorous (SAPS) are main drivers behind CBU. Poorly designed PCV will dump deposits on intake valves, but deposits are made out of SAPS. More SAPS, more deposits. Two things to look to limit CBU: 1. Low SAPS 2. Low Noack (evaporation loss). Problem with Low-SAPS in high performance engines is that phosphorus is ingredient of ZDDP, which was always main additive to protect from wear in engines. But, there are new oils that use different additives to mitigate for lack of SAPS. Also, there are indications that ZDDP is having adverse effects on timing chain guides etc. So, new API SP for example has specific timing chain test, specific LSPI test and they limited phosphorous to 800ppm. Only SHell Helix 5W40 (Pennzoil in US) is now API SP. Don't hold your breath that M1 or Castrol will fallow that as they rely on ZDDP more then Shell. As for your consumption, consumption comes from two things: 1. Mechanical damage or design. 2. Naock (evaporation loss). |
|
Appreciate
2
DrFerry6748.00 Assimilator1615.50 |
02-28-2021, 02:18 PM | #14 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Ugh, acronym rich! But appreciate the reply still
Do GTL oils have a slightly narrower VI than PAO/POE oils? In my admittedly short search I couldn't find out how well it compared to them, other than "well" Mobil1 reformulated all oils starting in 2015 bcs What's bcs? Carbon Build Up (CBU). Sulfated ash and phosphorous (SAPS) are main drivers behind CBU. Ok I find that statement confusing, Sulphur and Phosphor lead to Carbon build up?? I thought Carbon build up was largely poorly burnt HCs (oil and fuel), or does that include compounds of Carbon+Sulphur and/or Phosphor? Re Noack, which oil property/spec is that listed as? Re burning oil, roger that, I just don't know how much mine burns as I haven't driven it enough (even less than I 1st thought at about 600 miles! That'll change this year ). What are the consequences of burning off a lot of zinc? O2 sensor problems? So, going back to Mobil 1 vs Castrol comparison, am I right in saying that although the Mobil 1 has slightly higher SAPs, which could slightly increase CBU on the intake valves in theory, the fact that the S65 has port injection means it shouldn't make any material difference? For those like me who don't automatically know/remember what all these acronyms mean. PAO oil - Polyalphaolefin synthetic oil has a much wider Viscosity Index vs mineral oil, amongst other advantages (read link for more info). POE oil - Polyolester, another synthetic oil, with a wider VI than mineral oils (see graph in above link). GTL - Gas To Liquids (synthetic oil made from gas, also better than mineral oils, but I couldn't find how precisely it compared to PAO and POE oils). UOA - Used Oil Analysis (sending off an oil sample to a lab) TBN - Total Base Number (alkaline additives to counter acid build up)
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 10-15-2022 at 06:49 PM.. |
Appreciate
1
DrFerry6748.00 |
02-28-2021, 03:35 PM | #15 | |
Lieutenant Colonel
1549
Rep 1,505
Posts |
Quote:
But it is not as simple as that. It depends what they mixed in lab,whether base stock is heavy or light whether it will have higher VI. Higher VI is not necessarily good. It is good indication how it will affect fuel efficiency. But, this is where I appreciate Mobil1 or Motul. Shell/Pennzoil is very proud that their 0W30 oil has VI of 204. But, they do not post what is HTHS. In engines like S65 everything is about HTHS, VI is irrelevant. Very high VI usually means mediocre HTHS. EVaporation loss or Noack is something that companies do not post just like that. Noack in port injected cars does not mean a lot. But it indicates what base stock is used in oil. For example, Noack of Mobil1 0W40 is 8.7%. That is excellent achievement for oil like that. How they achieved that? GTL, PAO and POE combination. Noack of Liqui Moly 5W40 (lower Noack is easier to achieve in 5W40 than 0W40 is same base stock is used bcs. less VII) is 11%. That tells you that LM is using Group III base stocks and more VII. Many companies decide to not post these numbers. How I know? There is very good russian web site where a lot of these oils are tested in lab, so very often they test Noack: https://translate.google.com/transla...B%2F&sandbox=1 Now, this web site does not have 10W60 oils, but reviewing other oils, you can get idea which oil companies are at forefront of research and performance. Now SAPS. It is oil and fuel, but how much oil? That depends on Noack. Lower Noack, less oil. But deposits itself are constituted from SAPS, as SAPS is extremely hard to burn (reason why oils design for DPF/GPF equipped vehicles are so called Low-SAPS oils, ACEA C3, C2, C5). In S65 that does not matter. Port injection will solve deposit issue. Only way to 100% mitigate CBU issue in DI engines is duel DI and Port injection. For example VW uses that in European version of their EA888 engines. Toyota uses that in 2GR-FKS engines. But in S65, or my N52, no worries. Port injection, naturally aspirated engine, no CBU. So, Mobil1 10W60, bcs. it is so additive rich might be good for S65. Everything in that oil is there to prevent wear at worse conditions. ZDDP? Oil burn with high ZDDP will create concrete wall in your CAT. Not O2 sensor, but actually ruin your CATs |
|
Appreciate
2
DrFerry6748.00 Assimilator1615.50 |
03-01-2021, 02:09 PM | #16 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Cool, good to know, is all your knowledge from just that website?? Sounds like it's more widespread than that?
Re cats and concrete wall, do you mean it would coat the cat's matrix or that it would literally create a barrier across the insides of that cat? (either would be bad news of course!).
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. |
Appreciate
0
|
03-01-2021, 10:59 PM | #17 | |
Lieutenant Colonel
1549
Rep 1,505
Posts |
Quote:
But, that was in previous life. Now, use whatever I can to keep up with stuff. Yep, ZDDP will literally destroy your cat. That is why ghere is ongoing attempt to limit ZDDP. |
|
Appreciate
1
Assimilator1615.50 |
03-02-2021, 12:26 PM | #18 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Coating the cat presumably then.
Mind you burning oil is bad news for cats anyway. Hopefully mine doesn't much!
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. |
Appreciate
0
|
03-02-2021, 02:58 PM | #19 |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
Mobil 1 5W50 FS X2
M1 5W50 FS X2 quite often goes on sale in my area. Recently (Jan to Feb '21) the local NAPA Auto-Parts was selling M1 for $5.95 per quart! I now have BE bearings and was wondering if the M1 5W50 may now be out of the question due to the extra rod bearing clearance. It's worth mentioning that the E9X M3 Owners Manual does allow for the use of oil viscosities other than 10W60 but that's with OEM bearing clearances. Thoughts?
PS: Sorry to thread jack a 10W60 thread.
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
|
Appreciate
1
///M Power-Belgium68556.00 |
03-02-2021, 04:18 PM | #20 |
Major
616
Rep 1,080
Posts
Drives: BMW M3 e92 08 & 330d e90 10
Join Date: Sep 2019
Location: UK, Surrey
|
Aren't the other grade oils only to be allowed for top up purposes?
Also, BE state to stick with 10w60, so unless you have really cold winters I wouldn't use 5w50 now. Oil pressure hasn't been tested with BE bearings and 5w50, so who knows if it would be ok or not! Maybe it would, maybe it wouldn't. Care to be a guinea pig and report back over the years? I'd at least hook up an oil pressure gauge [edit] if I were you! PS their is a thread discussing 5w50 for these engines , this one https://www.m3post.com/forums/showthread.php?t=1592340
__________________
.
Oil analysis for finding wearing rod bearings?. Collation of oil analysis reports with some rod bearing photos for the M3's S65. My categorisation of pulled rod bearings in the rod bearing condition thread. My updated 'Blown engines' list. Last edited by Assimilator1; 02-06-2022 at 08:49 AM.. |
Appreciate
1
DrFerry6748.00 |
03-02-2021, 05:02 PM | #21 | |
Field Marshal
6748
Rep 1,829
Posts
Drives: '08 E92 M3
Join Date: Jul 2010
Location: Greenville, SC
|
Quote:
You're right, the other grade oils are for the addition of small quantities only (top up). It's covered on page 206 of the attached owner's manual. I used to top up 10W60 with M1 0W40 and recently ran (made the switch) to M1 5W50 for 18 months prior to the BE bearings install. Many folks have run the 0W40 M1 -> BUT with the OEM bearings. However, the M1 0W40 increased oil consumption over the 10W60 TWS - especially on longer journeys - if I recall correctly. So I'll just stick to the 10W60 now with the BE bearings. .
__________________
'08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch discs/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive by Diffs Online/BE Bearings & ARP Bolts/Vibra Technics Engine Mounts/M3 World HFC X-Pipe/LUX H8 180/BPM Sport DCT Tune/PFC Z-Rated Pads/ECS Brass Brake Caliper Bushings/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
|
|
Appreciate
2
///M Power-Belgium68556.00 Assimilator1615.50 |
03-03-2021, 11:29 AM | #22 | |
Lieutenant Colonel
1549
Rep 1,505
Posts |
Quote:
5W50 like Redline? Maybe. Redline is very thick 5W50 and its HTHS will be in range of 10W60 Castrol or Mobil1. Mobil1 5W50 HTHS is actually in range of Redline 5W40. But bcs. of KV100 I would stick to 10W60. |
|
Appreciate
1
DrFerry6748.00 |
Post Reply |
Bookmarks |
|
|