Aggressive Fitment Thread

Raptor251 · 01-22-2011, 01:24 PM

I actually read a bunch of different posts off of this forum that said "the M6 wheels would never fit" when searching google. Just wanted to let anyone know who didnt already because the only way I was able to find out was by trying it!

Dustin@AEp · 01-22-2011, 02:53 PM

Quote:

Originally Posted by Bart@AUTOcouture

The pics have a 265/35/19. I'm going 265/30/19 to achieve the same stance/setup as this car - http://www.m3post.com/forums/showthread.php?t=439800

Nice, I love that car's setup. You doing CH's too? I test fitted my rear 10 ET20 with the 275/35 on my front, but it was a little too tall. I'm going to try a 275/30 and see what happens. Should fit like a glove!

11' AW M3 · 01-23-2011, 02:58 PM

to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup?

wheeladdicts · 01-23-2011, 03:01 PM

Quote:

Originally Posted by 11' AW M3

to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup?

I know a 295/25/20 Nitto Invo works on an E90 M3 with a couple mm to spare. Using stock alignment settings...meaning car was lowered and never got an alignment afterwards.

Dustin@AEp · 01-23-2011, 03:05 PM

Yea, a 285 or 295 should fit no problem!

2005STi · 01-28-2011, 12:40 AM

Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life:

1. If you look at any other forum's "aggressive fitment thread" you will see something gravely different than what's in here.

So,

1. If you're not on coilovers - you're not aggressive.

2. If you fenders are not at least rolled - you're not aggressive

3. If you have wheel gap- you're not aggressive

4. If you do not have wheel gap as a result of your meaty ass tire - you have meaty tires; you're not aggressive.

5. If you're above the minimum tire size requirement for your given wheel size - you're not aggressive. This is preventing you from being aggressive.

6. If your offset is not at least 10mm lower than your stock wheels - you're not aggressive.

With all of this said, all of you have very nice wheels. So all this is is a wheel thread. So most of you need to try again. Learn a few lessons from Pre- E46s

- An STi that dynos more torque on a stock turbo than any of you will N/A

duk · 01-28-2011, 12:42 AM

^ will last long around here lol

chris s · 01-28-2011, 03:10 AM

Quote:

Originally Posted by 2005STi

Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life:....................

- An STi that dynos more torque on a stock turbo than any of you will N/A

It's STILL a Subaru!

Bob MG · 01-28-2011, 04:42 AM

20x9 ET 20 (255/30/20)
20x11 ET 25 (305/25/20)

wheeladdicts · 01-28-2011, 08:06 AM

Quote:

Originally Posted by 2005STi

2. If you fenders are not at least rolled - you're not aggressive

I guess there will never be an "aggressive" M3 then considering they dont have any fender lip to roll...

Eugene-TAIWAN · 01-28-2011, 09:09 AM

sick thread!

my set up is
19x9J ET15
19x11J ET15
F: 265/30/19
R: 295/30/19

Hedges · 01-28-2011, 09:41 AM

Quote:

Originally Posted by M3This

Specs:

Front: 10x19 ET20 265/30 R19
Rear: 10x19 ET20 -10mm Spacer= Et10 265/30 R19

Thread: http://www.m3post.com/forums/showthread.php?t=439800

Very sexy stance!

mkPOTO · 01-28-2011, 10:15 AM

love this thread!

SIN3 · 01-28-2011, 03:01 PM

is white the only color available? all i see is a sea of white M3's....

11' AW M3 · 01-28-2011, 04:40 PM

Quote:

Originally Posted by wheeladdicts

I know a 295/25/20 Nitto Invo works on an E90 M3 with a couple mm to spare. Using stock alignment settings...meaning car was lowered and never got an alignment afterwards.

Quote:

Originally Posted by Dustin@AEperformance

Yea, a 285 or 295 should fit no problem!

Thank you both

My new setup will be:
20 * 8.5 +15 255/30/20 PS2
20*10.5 +18 295/25/20 PS2

Hope it works with no problems

chiefinsd · 02-01-2011, 12:39 PM

Hey Guys, I have have an e92 non M and i have a set of Rial Daytona's i want to put on but they have e39 fitment. The fronts have an et14 and the rears have an et19 can someone help me out and suggest what i need to make this work i know i have to get hub centrics rings due to the bore. Also the tire sizes are 275/30/19 rears and 245/35/19 fronts. Thanks in advance.

Jay

IND-Distribution · 02-01-2011, 12:47 PM

I can't believe that STI guy took the time to register just to tell us about wheel fitment

M3E92's car with CHs is one of my favorite cars on M3Post. The stance is amazing!

M GmbH · 02-01-2011, 01:31 PM

Winner! This one is F-ing perfect.

Quote:

Originally Posted by Bob MG

20x9 ET 20 (255/30/20)
20x11 ET 25 (305/25/20)

TW0929 · 02-07-2011, 06:41 PM

sick thread!!

InTheNightKitchen · 03-18-2011, 03:30 PM

Quote:

Originally Posted by wheeladdicts

These are the most aggressive we have done on an E9x M3.

ZERO RUBBING!

Quote:

Originally Posted by M3This

Specs or ban! :P

Reanimation...

How are you gonna post this with no specs, and then ignore a fellow poster with no specs?

wheeladdicts · 03-18-2011, 03:37 PM

Sorry guys didnt even see the previous question. This setup took alot of time and money to get right so I can't release the exact offsets :/

The sizes were 20x9 (245/30/20 Nitto Invo) and 20x11 (285/25/20 Nitto Invo).

Its a tricky setup to make look good because if the car is not extremely lowered it doesnt look right. The rear tire is stretched so the wheel well looks empty if it isn't lowered aggressively.

andrew270681 · 03-18-2011, 04:34 PM

Quote:

Originally Posted by M3This

Specs:

20x9 et8 fronts with 255/30/20 tires.
20x10 et18 with 285/30/20 rears.

NOTES: according to the thread camber was need to fit

Thread: http://www.m3post.com/forums/showthread.php?t=244881

I have exactly the same rims with 245 30 20 tyres lowered on eibachs and didnt nedd to do any camber adjustment

01-22-2011, 01:24 PM	#45
Raptor251 ESS Dreaming 30 Rep 870 Posts Drives: 2011.5 e92 m3/Ford Raptor 6.2 Join Date: Jan 2011 Location: San Diego iTrader: (1)	I actually read a bunch of different posts off of this forum that said "the M6 wheels would never fit" when searching google. Just wanted to let anyone know who didnt already because the only way I was able to find out was by trying it!
	Appreciate 0 Quote

01-23-2011, 02:58 PM	#47
11' AW M3 Major 93 Rep 1,245 Posts Drives: 11' ZCP E92 M3 Join Date: May 2009 Location: california iTrader: (2)	to all the aggressive fitment guru's (and Dustin who has been very helpful), what do you think about a 20*10.5 +18.6ish rear? Am I pushing it too much? What size tire would you recommend for this setup? __________________ 2011 AW/FR Extended E92 M3... fully loaded
	Appreciate 0 Quote

01-23-2011, 03:05 PM	#49
Dustin@AEp Captain 51 Rep 625 Posts Drives: BMW E92 M3 Join Date: Mar 2010 Location: Southern California iTrader: (2)	Yea, a 285 or 295 should fit no problem!
	Appreciate 0 Quote

01-28-2011, 12:40 AM	#50
2005STi Registered 0 Rep 1 Posts Drives: Grey STi Join Date: Jan 2011 Location: hell iTrader: (0)	Some words of advice to you arrogant, uniformed, self-absorbed BMW owners who think you know a thing or two about your cars but really just bullshit through life: 1. If you look at any other forum's "aggressive fitment thread" you will see something gravely different than what's in here. So, 1. If you're not on coilovers - you're not aggressive. 2. If you fenders are not at least rolled - you're not aggressive 3. If you have wheel gap- you're not aggressive 4. If you do not have wheel gap as a result of your meaty ass tire - you have meaty tires; you're not aggressive. 5. If you're above the minimum tire size requirement for your given wheel size - you're not aggressive. This is preventing you from being aggressive. 6. If your offset is not at least 10mm lower than your stock wheels - you're not aggressive. With all of this said, all of you have very nice wheels. So all this is is a wheel thread. So most of you need to try again. Learn a few lessons from Pre- E46s - An STi that dynos more torque on a stock turbo than any of you will N/A
	Appreciate 0 Quote

01-28-2011, 12:42 AM	#51
duk ///M 193 Rep 3,191 Posts Drives: 2011 AW/FR 6MT E92 Join Date: Jun 2007 Location: Irvine, CA iTrader: (0)	^ will last long around here lol __________________ 2011.5 AW/FR E92 M3 6MT
	Appreciate 0 Quote

01-28-2011, 04:42 AM	#53
Bob MG Moderating 440 Rep 2,047 Posts Drives: like a muppet Join Date: Oct 2009 Location: Dubai iTrader: (0)	20x9 ET 20 (255/30/20) 20x11 ET 25 (305/25/20) Attached Images
	Appreciate 1 M_Torx522.00 Quote

01-28-2011, 09:09 AM	#55
Eugene-TAIWAN Brigadier General 295 Rep 3,157 Posts Drives: E92 M3 Coupe Join Date: Jun 2009 Location: Taiwan iTrader: (4)	sick thread! my set up is 19x9J ET15 19x11J ET15 F: 265/30/19 R: 295/30/19 __________________ Past: Gintani stage3 M3, Cayman GTS present: Porsche 993RWB, 964RS America,996 cupcar, 964 turbo 3.6,Macan Turbo,997GT2,930 turbo,i3, MINI JCW
	Appreciate 1 M_Torx522.00 Quote

01-28-2011, 10:15 AM	#57
mkPOTO Mr. Nice Says Hello 692 Rep 16,661 Posts Drives: BMW M3 \| X5 xdrive 35i MSport Join Date: Dec 2008 Location: USA iTrader: (25) Garage List 2002 Lexus GS300 [0.00] 2008 BMW E92 M3 [5.58]	love this thread!
	Appreciate 0 Quote

01-28-2011, 03:01 PM	#58
SIN3 Wheel Fitment Connoisseur 2 Rep 11 Posts Drives: slow and low top down Join Date: Jul 2009 Location: SoCali:Wii Wii Land iTrader: (0)	is white the only color available? all i see is a sea of white M3's.... __________________ 2006 M3 Cabrio 2004 ZHP Cabrio /stanceworks\ "keep it clean, keep it OEM+"
	Appreciate 0 Quote

02-01-2011, 12:39 PM	#60
chiefinsd New Member 1 Rep 8 Posts Drives: like whoa Join Date: Jun 2008 Location: san diego iTrader: (0)	Hey Guys, I have have an e92 non M and i have a set of Rial Daytona's i want to put on but they have e39 fitment. The fronts have an et14 and the rears have an et19 can someone help me out and suggest what i need to make this work i know i have to get hub centrics rings due to the bore. Also the tire sizes are 275/30/19 rears and 245/35/19 fronts. Thanks in advance. Jay Last edited by chiefinsd; 02-01-2011 at 12:57 PM..
	Appreciate 0 Quote

02-01-2011, 12:47 PM	#61
IND-Distribution BimmerPost Supporting Vendor 11162 Rep 11,423 Posts Drives: G82 / G87 / G90 Join Date: Oct 2006 Location: Chicago iTrader: (3)	I can't believe that STI guy took the time to register just to tell us about wheel fitment M3E92's car with CHs is one of my favorite cars on M3Post. The stance is amazing! __________________ IND DISTRIBUTION \| 866-963-4520 • INSTAGRAM • YOUTUBE • FACEBOOK • FLICKR
	Appreciate 0 Quote

02-07-2011, 06:41 PM	#63
TW0929 Lieutenant 27 Rep 524 Posts Drives: 1M Join Date: Feb 2010 Location: NYC iTrader: (0)	sick thread!!
	Appreciate 0 Quote

03-18-2011, 03:37 PM	#65
wheeladdicts Brigadier General 250 Rep 3,173 Posts Drives: E90 M3 Join Date: Oct 2009 Location: South Florida iTrader: (3)	Sorry guys didnt even see the previous question. This setup took alot of time and money to get right so I can't release the exact offsets :/ The sizes were 20x9 (245/30/20 Nitto Invo) and 20x11 (285/25/20 Nitto Invo). Its a tricky setup to make look good because if the car is not extremely lowered it doesnt look right. The rear tire is stretched so the wheel well looks empty if it isn't lowered aggressively.
	Appreciate 0 Quote