![]() |
|
|
| 04-28-2026, 07:20 AM | #1 |
|
Private First Class
![]()
61
Rep 106
Posts |
DCT holds gears when cold
Following a cold start, my DCT is reluctant to shift up gears, and holds onto 1st, 2nd and sometimes even 3rd until 3k rpm or so. This annoys me as we all know high revs when cold isn't how you should look after an S65.
Is this normal behaviour, or just my car? I just completed a full DCT service and re-calibration with ISTA in the hope that it may help, but alas, the car still drives the same. The condition of the oil was very good and inside the transmission was spotless, looked brand new. I hear GTS DCT software can improve drivability. Is this issue potentially something it could solve? |
| 04-28-2026, 12:13 PM | #2 |
|
First Lieutenant
![]() ![]() 132
Rep 381
Posts |
I’m an original owner. Its normal. But just a few miles.
|
|
Appreciate
2
spammysammich3073.00 TassieBMW61.00 |
| 04-28-2026, 02:27 PM | #4 |
|
Lieutenant Colonel
![]() 1269
Rep 1,613
Posts
Drives: 2012 e92 M3 DCT ZCP
Join Date: Oct 2010
Location: Michigan
|
Agree with others, normal. I wouldn’t call 3k rpm high either when redline is over 8k.
Last edited by nick3753; 04-28-2026 at 02:27 PM.. |
|
Appreciate
0
|
| 04-28-2026, 06:01 PM | #5 | |
|
Private First Class
![]()
61
Rep 106
Posts |
Quote:
I usually let the cold start finish so the revs drop to around 500rpm then drive away. I've noticed a couple of times when I've let the car sit an extra long time (while moving another car out of the way) it doesn't actually do it. Maybe its just to do with the cold start cycle, but that takes forever to finish completely. |
|
|
Appreciate
0
|
| 04-28-2026, 11:58 PM | #6 | |
|
Lord Scrip
2390
Rep 3,419
Posts
Drives: 2011 M3 Coupe
Join Date: Jan 2012
Location: LA,Ca
|
Quote:
__________________
![]() |
|
|
Appreciate
1
TassieBMW61.00 |
Post Reply |
| Bookmarks |
| Tags |
| dct, gearbox, transmission |
|
|