Another alignment thread

spooni · 08-26-2022, 05:19 PM

Suspension: Nitron R1

Here's my current specs. I'd like to dial the car in a bit, any suggestions? I had some pushing last track day.

I was thinking another -0.5 of camber up front, rear I believe is maxed out. Where else can I improve?

slcook54 · 08-26-2022, 05:46 PM

Been chatting with Phil at Bimmerworld. This is what I'm going with next time out.

omgzirra_exe · 08-26-2022, 06:30 PM

pretty close to my alignment, based on what cook showed.

-3.2F driver -3.3F Passenger
7.5 Caster
0 toe front

-2.5R Driver and passenger
1/8th toe in rear.

i am also corner balanced.

-3.5 would be ideal.. but once i get some more testing in and checking tire temps.. i'll know to add more if needed.

-3.2/.3 w/ 0 toe front is pretty good for a street/track compromise too.

rhyary · 08-27-2022, 07:15 AM

I have a good tire wear and success with:
Front -3.5 camber, Toe out .05
Rear -2.5 camber, Toe in .05

Pic front tire wear after 3 hard days at WGI:

tsk94 · 08-31-2022, 12:58 PM

Going to -3.5* could help. I'd do 0 toe up front as well. What's the deal with that rear toe?

Pushing at what phase of the turn? Alignment could help, but it might be more related to damper settings, sway bars, etc.

08-26-2022, 05:19 PM	#1
spooni Lieutenant 507 Rep 512 Posts Drives: '11 E92 comp Join Date: Jan 2020 Location: Sacramento CA iTrader: (0)	Another alignment thread Suspension: Nitron R1 Here's my current specs. I'd like to dial the car in a bit, any suggestions? I had some pushing last track day. I was thinking another -0.5 of camber up front, rear I believe is maxed out. Where else can I improve? Attached Images __________________ IG: @M3spooni
	Appreciate 1 slcook541874.50 Tweet Quote

08-26-2022, 05:46 PM	#2
slcook54 Captain 1875 Rep 893 Posts Drives: 2012 MR M3 / 2018 SMB M3 CS Join Date: Aug 2014 Location: San Francisco iTrader: (0)	Been chatting with Phil at Bimmerworld. This is what I'm going with next time out. Attached Images __________________ Instagram: slcook54
	Appreciate 1 spooni506.50 Quote

08-26-2022, 06:30 PM	#3
omgzirra_exe Colonel 3057 Rep 2,621 Posts Drives: 4.4L M3, 1JZGTE IS300, N55B30 Join Date: Jun 2019 Location: BMW, M3 iTrader: (0)	pretty close to my alignment, based on what cook showed. -3.2F driver -3.3F Passenger 7.5 Caster 0 toe front -2.5R Driver and passenger 1/8th toe in rear. i am also corner balanced. -3.5 would be ideal.. but once i get some more testing in and checking tire temps.. i'll know to add more if needed. -3.2/.3 w/ 0 toe front is pretty good for a street/track compromise too. __________________ Build: ZillaSpec M3 N1 Build M3Post Track General Discussion: Discord #fakeGTS
	Appreciate 2 slcook541874.50 spooni506.50 Quote

08-27-2022, 07:15 AM	#4
rhyary Banned 1637 Rep 2,883 Posts Drives: 2013 M3 Join Date: May 2015 Location: Albany, NY iTrader: (0)	I have a good tire wear and success with: Front -3.5 camber, Toe out .05 Rear -2.5 camber, Toe in .05 Pic front tire wear after 3 hard days at WGI: Attached Images
	Appreciate 2 spooni506.50 omgzirra_exe3056.50 Quote

08-31-2022, 12:58 PM	#5
tsk94 Lieutenant Colonel 1727 Rep 1,716 Posts Drives: E92 M3, E82 128i, F82 M4, E36 Join Date: May 2017 Location: Calgary iTrader: (2)	Going to -3.5* could help. I'd do 0 toe up front as well. What's the deal with that rear toe? Pushing at what phase of the turn? Alignment could help, but it might be more related to damper settings, sway bars, etc.
	Appreciate 0 Quote