Shifter Malfunction Error

Jaymesb2 · 05-02-2022, 02:27 PM

Hello,

My 2008 e92 M3 is having a shifter malfunction error. It will not drive or go into gear but the car starts fine. The last time I drove it, everything seemed fine. I tried to drive it again and I got this error. I have taken it to 2 different shops (Not the dealer) with no avail. Anyone else ran into this issue or have any insight before I spend my life savings at the dealer? Ha

Thanks.

FazerBoy · 05-02-2022, 02:44 PM

Is it DCT or manual shift?

Jaymesb2 · 05-02-2022, 02:52 PM

Quote:

Originally Posted by FazerBoy

Is it DCT or manual shift?

It is DCT. That is important. haha

nycplumber · 05-02-2022, 06:54 PM

Sometimes the shifters go bad. Anyone with m3 near you that you can swap dct shifters? Also post the fault code

omgzirra_exe · 05-03-2022, 01:48 AM

check to see if your crankshaft pulse sensor came loose at the DCT passenger side, you just need to remove the cover to access it.

amrazM · 05-03-2022, 07:12 AM

Quote:

Originally Posted by omgzirra_exe

check to see if your crankshaft pulse sensor came loose at the DCT passenger side, you just need to remove the cover to access it.

the car wouldnt start if this came loose,

your gear selector has probably began to go bad. I would try swapping it out.

DrFerry · 05-03-2022, 07:56 AM

Quote:

Originally Posted by Jaymesb2

Hello,

My 2008 e92 M3 is having a shifter malfunction error. It will not drive or go into gear but the car starts fine. The last time I drove it, everything seemed fine. I tried to drive it again and I got this error. I have taken it to 2 different shops (Not the dealer) with no avail. Anyone else ran into this issue or have any insight before I spend my life savings at the dealer? Ha

Thanks.

DCT Shift Selector
https://www.realoem.com/bmw/enUS/sho...diagId=25_0474
.
https://www.realoem.com/bmw/enUS/sho...diagId=25_0521
.

Jaymesb2 · 05-03-2022, 09:34 AM

Quote:

Originally Posted by amrazM

the car wouldnt start if this came loose,

your gear selector has probably began to go bad. I would try swapping it out.

Have you ever done this? I have changed the fuel pump in the tank before. That is advanced as I have done myself. Or would you recommend taking it in?

Jaymesb2 · 05-03-2022, 09:35 AM

Quote:

Originally Posted by DrFerry

DCT Shift Selector
https://www.realoem.com/bmw/enUS/sho...diagId=25_0474
.
https://www.realoem.com/bmw/enUS/sho...diagId=25_0521
.

When you change one, do you usually change both?

DrFerry · 05-03-2022, 09:47 AM

Quote:

Originally Posted by Jaymesb2

Quote:

Originally Posted by DrFerry

DCT Shift Selector
https://www.realoem.com/bmw/enUS/sho...diagId=25_0474
.
https://www.realoem.com/bmw/enUS/sho...diagId=25_0521
.

When you change one, do you usually change both?

No, just the shift knob from the boot up first. Research by Google the codes being thrown to be sure.

omgzirra_exe · 05-03-2022, 12:31 PM

Quote:

Originally Posted by amrazM

the car wouldnt start if this came loose,

your gear selector has probably began to go bad. I would try swapping it out.

thats not true. lol i had this happen to me at ACH my pulse sensor came loose and the car started but wouldn't move while in gear

got home and the pulse sensor was literally barely on.

turbo_joe · 05-03-2022, 12:36 PM

Not sure what codes you have but the car can drive without even having the dct shift knob installed. I just did this while I had my car ripped all apart. So I wouldn't jump to needing to replace the entire shift knob.

omgzirra_exe · 05-03-2022, 01:15 PM

Quote:

Originally Posted by turbo_joe

Not sure what codes you have but the car can drive without even having the dct shift knob installed. I just did this while I had my car ripped all apart. So I wouldn't jump to needing to replace the entire shift knob.

i think you can force into gear with the protools app too.

DrFerry · 05-03-2022, 04:27 PM

Read the codes with an OBD II code scanner. Then post the codes here. Someone will know what the fault codes mean. The image in your original post is not showing on the Bimmerpost phone App.

powerbait · 05-03-2022, 10:44 PM

Time to replace your battery.

05-02-2022, 02:27 PM	#1
Jaymesb2 New Member 3 Rep 5 Posts Drives: 2008 E92 M3 Join Date: May 2022 Location: California iTrader: (0)	Shifter Malfunction Error - Will not drive. Hello, My 2008 e92 M3 is having a shifter malfunction error. It will not drive or go into gear but the car starts fine. The last time I drove it, everything seemed fine. I tried to drive it again and I got this error. I have taken it to 2 different shops (Not the dealer) with no avail. Anyone else ran into this issue or have any insight before I spend my life savings at the dealer? Ha Thanks.
	Appreciate 1 DrFerry10035.50 Tweet Quote

05-02-2022, 02:44 PM	#2
FazerBoy Lieutenant 45 Rep 514 Posts Drives: BMW E92 M3 Join Date: Jul 2008 Location: London, UK iTrader: (0)	Is it DCT or manual shift?
	Appreciate 1 detelloo34.50 Quote

05-02-2022, 06:54 PM	#4
nycplumber Major 790 Rep 1,318 Posts Drives: slow Join Date: Apr 2016 Location: Spring Lake NJ iTrader: (0)	Sometimes the shifters go bad. Anyone with m3 near you that you can swap dct shifters? Also post the fault code
	Appreciate 0 Quote

05-03-2022, 01:48 AM	#5
omgzirra_exe Colonel 3058 Rep 2,621 Posts Drives: 4.4L M3, 1JZGTE IS300, N55B30 Join Date: Jun 2019 Location: BMW, M3 iTrader: (0)	check to see if your crankshaft pulse sensor came loose at the DCT passenger side, you just need to remove the cover to access it. __________________ Build: ZillaSpec M3 N1 Build M3Post Track General Discussion: Discord #fakeGTS
	Appreciate 1 DrFerry10035.50 Quote

05-03-2022, 12:36 PM	#12
turbo_joe Lieutenant Colonel 1685 Rep 1,617 Posts Drives: 2012 M3 Coupe Join Date: Jul 2015 Location: SOMD iTrader: (2)	Not sure what codes you have but the car can drive without even having the dct shift knob installed. I just did this while I had my car ripped all apart. So I wouldn't jump to needing to replace the entire shift knob. __________________ 2012 E92 M3 Instagram Turbo__Joe
	Appreciate 1 DrFerry10035.50 Quote

05-03-2022, 04:27 PM	#14
DrFerry Field Marshal 10036 Rep 2,641 Posts Drives: 2008 E92 M3 Join Date: Jul 2010 Location: Greenville, SC iTrader: (5)	Read the codes with an OBD II code scanner. Then post the codes here. Someone will know what the fault codes mean. The image in your original post is not showing on the Bimmerpost phone App. __________________ '08 E92 M3 DCT Melbourne Red/Bamboo Beige Leather/EDC/SSP Spec-R DCT clutch/SSP Pro-Gold DCT Fluid/Quaife LSD/3:45 Final Drive/BE Bearings & ARP Bolts/LUX H8 180/DCT Tune by BPM Sport/PFC Z-Rated Pads/ECS Brass Brake Caliper Guides/Alex Shop Solid Sub-frame Bushings/Motul 600/Tint
	Appreciate 2 DukeofAlexandria727.00 ///M Power-Belgium92183.50 Quote

05-03-2022, 10:44 PM	#15
powerbait postimus minimus 419 Rep 279 Posts Drives: M3 addiction Join Date: Jan 2014 Location: FL iTrader: (11) Garage List 2006 BMW M3 [10.00] 2011 BMW 1M [10.00] 2009 BMW M3 [10.00] 2010 BMW M3 [8.05] 1998 BMW M3 [9.30]	Time to replace your battery.
	Appreciate 0 Quote