**BPMSport E9x M3 Performance Engine Tuning Software** - E9x M3 Tuning Leader

[BPMSport]

Originally Posted by 0100

I will be ordering but have a question.

How much is it to upgrade to stage II down the road. I already have the test pipes, but don't plan on installing till after the winter.

Thanks!

The Stage II upgrade is $200, but let us know when the test pipes are on and we will provide a nice discount

[0100]

^Awesome thanks!!!

[Ervin87]

For those in CA, will this tune cause any issues when it is time to smog, even when returning to factory ?

[BPMSport]

Originally Posted by Ervin87

For those in CA, will this tune cause any issues when it is time to smog, even when returning to factory ?

No problems at all. You can revert to stock for smog in 6 minutes and it will pass with flying colors provided everything is working properly with the vehicle. It will take a couple drive cycles to set the monitors ready, and we can provide detailed directions on this.

[Le-Blu]

Just purchased Test Pipes, now I'm looking to do a tune.

Purchased Stage II and DCT with the BPMBF2021 code. If I'm reading everything right, install is done through the included cable and if I run into issues I can get in touch with you (Mike)?

Thanks!

[slcook54]

Originally Posted by BPMSport

No problems at all. You can revert to stock for smog in 6 minutes and it will pass with flying colors provided everything is working properly with the vehicle. It will take a couple drive cycles to set the monitors ready, and we can provide detailed directions on this.

Assuming you still have cold start in place, can you pass without reverting back to stock or is it detectable?

[philm3e93]

Just ordered! Question. Is 3500 a good launch limit even for Rev matching between gears?

[BPMSport]

Originally Posted by Le-Blu

Just purchased Test Pipes, now I'm looking to do a tune.

Purchased Stage II and DCT with the BPMBF2021 code. If I'm reading everything right, install is done through the included cable and if I run into issues I can get in touch with you (Mike)?

Thanks!

Absolutely,

We provide full step by step directions in our 9 page color manual which details every with pictures. My cell is included on the business card inside the package if you need any assistance. We are also happy to schedule a remote session to take care of it for you remotely.

It's a very easy process from start to finish, 10-15 minutes with a PC (add 5 minutes to this for those getting DCT software as well. We also provide a walkthrough video for those who do not have access to a PC and will be using their MAC. Thank you!

Slcook54: In most states the software will pass with Stage I software provided there isn't a defect with the Secondary Air System. For more specific information about emissions please contact us.

Phil: Most 6MT drivers who want the launch assist feature choose 3,500 RPM. The feature is only active at a complete standstill. There is a video showing it's use and function at the bottom of the product page for the tune. Note that RPM will be limited to the RPM chosen when the vehicle is completely stationary (meaning you won't be able to rev it to 4K when completely stopped- but rolling at .5 MPH the full redline is available).

Any questions, please don't hesitate to ask us!

[slcook54]

Originally Posted by BPMSport

Absolutely,

We provide full step by step directions in our 9 page color manual which details every with pictures. My cell is included on the business card inside the package if you need any assistance. We are also happy to schedule a remote session to take care of it for you remotely.

It's a very easy process from start to finish, 10-15 minutes with a PC (add 5 minutes to this for those getting DCT software as well. We also provide a walkthrough video for those who do not have access to a PC and will be using their MAC. Thank you!

Slcook54: In most states the software will pass with Stage I software provided there isn't a defect with the Secondary Air System. For more specific information about emissions please contact us.

Phil: Most 6MT drivers who want the launch assist feature choose 3,500 RPM. The feature is only active at a complete standstill. There is a video showing it's use and function at the bottom of the product page for the tune. Note that RPM will be limited to the RPM chosen when the vehicle is completely stationary (meaning you won't be able to rev it to 4K when completely stopped- but rolling at .5 MPH the full redline is available).

Any questions, please don't hesitate to ask us!

Just submitted contact inquiry through the site.

[BPMSport]

Thanks for all the orders everyone! If your order number is #3610 or below, you're all set and the cables will ship Monday. We had them all ready for shipment today but FedEx closed early.

We are extremely low on stock of cables. For orders #3611 and above, if you don't require the BPM box or stickers, we can have your cables sent from various dealers across the US to get you your tune more quickly. Shoot us a message if you'd prefer that.

Otherwise, our next delivery is currently with FedEx in Germany, as as soon as they land here we will ship your order. We will be probably end the sale soon due to the low stock. Thank you!

[slcook54]

Originally Posted by BPMSport

Thanks for all the orders everyone! If your order number is #3610 or below, you're all set and the cables will ship Monday. We had them all ready for shipment today but FedEx closed early.

We are extremely low on stock of cables. For orders #3611 and above, if you don't require the BPM box or stickers, we can have your cables sent from various dealers across the US to get you your tune more quickly. Shoot us a message if you'd prefer that.

Otherwise, our next delivery is currently with FedEx in Germany, as as soon as they land here we will ship your order. We will be probably end the sale soon due to the low stock. Thank you!

Thanks Mike, responded to my order email, 3615. My shop should have the cable already, unless there is something proprietary, so no issues on my end.

[BPMSport]

Originally Posted by slcook54

Thanks Mike, responded to my order email, 3615. My shop should have the cable already, unless there is something proprietary, so no issues on my end.

If your shop is one of our dealers, we can assign a cable from their inventory to you. There are about about 15 dealers with cables currently in stock. The cables are serialized and assigned to each order, and they are proprietary. I will check your order and based on your location will let you know availability. I will post a list of dealer inventory by location soon. If close by or you are willing to pick it up, drop us a message and we will make the necessary arrangements.

Thank you!

[slcook54]

Originally Posted by BPMSport

If your shop is one of our dealers, we can assign a cable from their inventory to you. There are about about 15 dealers with cables currently in stock. The cables are serialized and assigned to each order, and they are proprietary. I will check your order and based on your location will let you know availability. I will post a list of dealer inventory by location soon. If close by or you are willing to pick it up, drop us a message and we will make the necessary arrangements.

Thank you!

Got it. It's VT Motorworks, in the Bay Area. If they aren't a dealer then I'll just skip the sticker and box to speed things up.

[BPMSport]

Originally Posted by slcook54

Got it. It's VT Motorworks, in the Bay Area. If they aren't a dealer then I'll just skip the sticker and box to speed things up.

VT is a dealer, but they do not have current stock. Performance Technic is the closest dealer to them, and I show they have 3 in stock.

Other vendors that have cables if any of you may be near them:

Harrison Motorsport - GA
Viteks Autoweks - Canada
Performance One - Canada
VCM - Canada
German Motorworks - TN
German Auto Doctor -
Winslow BMW - Colorado
German Autotek - Norcal
Autocoture - NJ
There are also a couple in Australia.

FedEx shows that the new batch of cables is currently in customs clearance in Indianapolis, so I think all of the orders will be shipped by mid week. If you happen to be near one of the above dealers, let us know and we can coordinate for you. Otherwise sit tight and a whole lot of smiles will be on the way to you soon!

Thanks!

[Le-Blu]

Originally Posted by BPMSport

Last Day!

Do you offer tunes for E92 N55? Just purchased for my S65, and my dad is in the market for a safe tune for his 335. I saw f series N55 tunes, assuming that won't work.


Seems like this one is for an N54, he has a N55

https://www.bpmsport.com/tune-bpm-e9x-335i.html


Thanks!

[BPMSport]

Originally Posted by Le-Blu

Do you offer tunes for E92 N55? Just purchased for my S65, and my dad is in the market for a safe tune for his 335. I saw f series N55 tunes, assuming that won't work.


Seems like this one is for an N54, he has a N55

https://www.bpmsport.com/tune-bpm-e9x-335i.html


Thanks!

Yes we do! We've got some great software for the N55, we tune tons of them on the F Series Models.

You can place your order using that link and just shoot me a message and I will make an internal note it's for an N55. For the N55 E series cars we will send a dealer cable that will need to be returned post flash as the standard tuning cables exclude that model specifically. Thanks!

[Le-Blu]

Originally Posted by BPMSport

Yes we do! We've got some great software for the N55, we tune tons of them on the F Series Models.

You can place your order using that link and just shoot me a message and I will make an internal note it's for an N55. For the N55 E series cars we will send a dealer cable that will need to be returned post flash as the standard tuning cables exclude that model specifically. Thanks!

Awesome thank you! I'll try to get him to order before the sale is up

[BPMSport]

Our cables are still hung up with FedEx In Indianapolis. We provided all of the customs documentation on Monday. Just called again and they opened a case, so I think they should be landing in the next couple days. As soon as they arrive we will ship. Sorry for the delay! FedEx has been a mess lately.

[BPMSport]

Orders 3612, 3613, 3620, shipped. 3615 Will be shipped from FL tomorrow. 3611 and 3622 shipping tomorrow.

There is one cable in FL I can allocate to 3614 now, I will send you an email. Thanks all!

[BPMSport]

Just finished writing nearly 20 tunes.

At this point, everyone should have the software ordered in their email, as well as a tracking number emailed. If you are missing either of these, please reach out to us.

(Only the 3 orders heading to Malaysia will not have the tracking info yet). Thanks all!

[bhowelett]

Got my stage 2 and DCT tunes installed today. Both are outstanding!! Driving dynamics are what I was looking for. I can't believe how much more smoothly the car drives; and how much quicker it feels!

I highly recommend this tune to everyone.

[shuggy]

Hey Mike,

Happy New Year! We've never chatted before, but over the years, I've always come across your posts when researching tunes, retrofits, and coding. Have always been impressed with your knowledge.

I am interested in purchasing your combox retrofit, as well as your tune. I've been running ESS for almost 10 yrs, but I think it's time for a change!

Please let me know a time that's convenient for you, and I will give you a call. I followed you on IG and saw you are out of town - not time urgent, so I can wait until you are home and situated. I am in LA/OC, so will not be needing to do remote work.

Thanks,
Scott