Hard Motorsports Splitter compatible with Deansbimmer Undertray/ESS Supercharger?

[MidnightM3]

I'm doing a fair bit of enhancements right now as the car goes into its next stage of ownership. One of those enhancements is refreshing the front end, so I was researching how to mount the Hard Motorsports Splitter and if the chassis mounts they sell (which appear to be a weak option alone without splitter rods/shocks providing added support) would work with my setup. That is will it work with a Deansbimmer Undertray and ESS Supercharger (intercooled kit)? No one seems to make a good chassis mount option for the E9X platform, and I'm not certain if any are compatible with my setup.

I can't seem to find anything on this topic and felt this might be the best place to get some guidance. Also what is the preferred/recommended mounting point and size of the splitter rods/shocks, if I'm only planning to run 2?

Last question here, I ordered a Fall-Line Motorsports DCT Pan, but am also replacing the DCT side pan as well. Is there a good side pan option for the DCT or is OEM just fine?

Thank you in advance.

[b4hand]

The deansbimmer undertray is quite large and will probably interfere. If you are doing serious track work, I splitter would replace the undertray anyways.

[sc_tr0jan_m3]

I haven't heard great reviews of the hard splitter, mainly how prone to deflection it is. You might be better off just building one yourself

[berns]

Are you going to the track or just want a splitter for looks? I would recommend building something custom, or doing something easy and nice looking like the GTS lip/splitter combo.

[SAMM3Y]

You might struggle with the placement of the ess IC pump and or intercooler.