What have you done with or to your M3 today?

dangitwes · 09-19-2020, 04:34 PM

Quote:

Originally Posted by Silos

Just installed mine too and echo your sentiments about the tray -- that fitment is on the money! Using rivets instead of dealing with bolts/nuts made the install go much faster -- happy customer here -- 10/10 would recommend

It's also worth noting, which I forgot to in my post, these are powder coated gloss black, so any weird things in there are reflections from the floor because these are super clean and reflective.

Silos · 09-19-2020, 04:38 PM

Quote:

Originally Posted by romero1990

I wonder if rocks and chips will fly into the area and jam/break stuffs?

wut? The tray vent design is similar to oem. Very unlikely for anything to fly in there - let alone break anything.

Scharbag · 09-19-2020, 04:54 PM

Quote:

Originally Posted by Silos

Quote:

Originally Posted by 911r

How much did it set you back? I've been looking at several under-trays (pinnacle, turner, mporium) and this certainly looks like a contender.

$350 (picked up, not sure about shipping) -- I entertained MPorium and although a nice piece, it comes in @12 lbs and requires you to move power/oil lines around to make way for their tray, where this one does not as its got a bend to clear them.

I have the Mporium one. I do not recall having to relocate anything.

Silos · 09-19-2020, 04:55 PM

Quote:

Originally Posted by Scharbag

I have the Mporium one. I do not recall having to relocate anything.

Relocate was the wrong word. I meant rearrange/move out of the way.

DL335D · 09-19-2020, 06:29 PM

Quote:

Originally Posted by Silos

Quote:

Originally Posted by M3GHO5T

So I know this was brought up a few weeks ago, but I got the final one this week and installed today. I seriously cannot believe the quality and fitment of this. When I got the car, it was missing, so I didn't even realize how much play my bumper had until I installed this plate and it all tightened up. It even came with all new hardware! Maybe a 20 minute install, too. Longest part was jacking the car up

If you guys are interested, I highly recommend messaging @wns2n_t on Instagram and seeing if he has any left (SoCal). Hope everyone is having a good Saturday!

Just installed mine too and echo your sentiments about the tray -- that fitment is on the money! Using rivets instead of dealing with bolts/nuts made the install go much faster -- happy customer here -- 10/10 would recommend

Looks awesome. What material? The salt they use on the roads here in the winter destroys steel.

WNS2N_T · 09-19-2020, 06:45 PM

Quote:

Originally Posted by DL335D

Looks awesome. What material? The salt they use on the roads here in the winter destroys steel.

Thank you Sir.

Materials:

Cover: Aircraft Grade 0.065 Aluminum Sheet
Reinforced Bracket: Aluminum
Rivets: Aluminum

Processed with:
Military Spec Hard Coating Gloss Black

Bolts and Hardwares was Zinc Plated
Rubber seals of course made of rubber.

Material certs are on hand and available upon request.

With this, it can withstand winter road salts

DL335D · 09-19-2020, 07:22 PM

Wow! That's a quality piece.

WNS2N_T · 09-19-2020, 07:28 PM

Quote:

Originally Posted by DL335D

Wow! That's a quality piece.

Thank you

neilum · 09-19-2020, 07:46 PM

Paint correction.

irokwrx · 09-19-2020, 08:22 PM

[QUOTE=Cyberdemon;26701898]Had a mobile repair guy come and touch up some gnarly chips on the 219M's I just bought for winter wheels. Did a pretty good job.

Outstanding!

irokwrx · 09-19-2020, 08:48 PM

I installed this wing today, I am waiting for some more wrap so I can remove the trunk wing and re-wrap the trunk. I cant see SHIT! Does anyone know of a universal wing riser? I need about 2-3 more inches.

Grip Addict · 09-19-2020, 10:12 PM

Took a weekend drive.

Scrippy · 09-20-2020, 03:25 AM

Quote:

Originally Posted by Rez.49

Quote:

Originally Posted by Scrippy

Side markers.

You can get a new set of gloss black smoked or unsmoked sidemarkers which include those stickers and others M alternatives for $85..

Thats an insane price for just stickers bro.
DM me if you need.

I probably could get cheaper stickers but they all end up like this from the sun. At least OEM stickers have UV resilience. Thank you for offering an option though, I appreciate it.

stefan_e36 · 09-20-2020, 05:50 AM

A bit of detailing, looks great after this.

dangitwes · 09-20-2020, 12:58 PM

Quote:

Originally Posted by Scrippy

Quote:

Originally Posted by Rez.49

Quote:

Originally Posted by Scrippy

Side markers.

You can get a new set of gloss black smoked or unsmoked sidemarkers which include those stickers and others M alternatives for $85..

Thats an insane price for just stickers bro.
DM me if you need.

I probably could get cheaper stickers but they all end up like this from the sun. At least OEM stickers have UV resilience. Thank you for offering an option though, I appreciate it.

Mine look just like this too. I can't justify that can't of money new stickers.

stefan_e36 · 09-20-2020, 01:05 PM

Quote:

Originally Posted by M3GHO5T

Mine look just like this too. I can't justify that can't of money new stickers.

M3 is not a budget car, and not only because of stickers.
To looks great, you have to pay: party0030:

Dpc2u · 09-20-2020, 03:29 PM

Finally got around to recoding the low fuel warning. Went from the annoying 1/4 tank to 1/6th tank. Originally was going to do 1/8th, but I never go that low anyway.

Scrippy · 09-20-2020, 06:54 PM

Rear brake rotors, pads and sensor. Just need an alignment now.

MR_WAR · 09-20-2020, 07:32 PM

I just did my front pads and rotors and Gloss Black M Trunk badge lol.

DL335D · 09-20-2020, 07:41 PM

Quote:

Originally Posted by Dpc2u

Finally got around to recoding the low fuel warning. Went from the annoying 1/4 tank to 1/6th tank. Originally was going to do 1/8th, but I never go that low anyway.

Ha...I need the warning at 1/4 tank. The way I drive I can only get about 20 miles after the light comes on. Lol

XKxRome0ox · 09-21-2020, 11:17 AM

my sister's e92 328i got crushed by a huge oak tree falling on it
thankfully it fell into the street and not into their house!
and no one was hurt

a healthy looking tree falling over from the base of the trunk without any rain/wind...
must have been diseased and rotting away inside
time to check the trees on your street!

this happened in south pasadena

s14_kev · 09-21-2020, 11:25 AM

Engine stalled while driving on Friday night. Car wouldn't start, it would just crank for a few seconds then stop, so had to get it towed home. It was throwing code P0335 for the crankshaft position sensor. I need my car during the week and of course my dealer was closed Sat/Sun so I ended up replacing it with a Duralast part from Autozone and it seems to be working ok (lifetime warranty if it dies...).

I'm not sure what happened to my OE sensor, but here's how it looked when I pulled it out. I'm worried there might be bits of it stuck in the transmission so I might be flushing my fluid soon.

09-19-2020, 07:22 PM	#13977
DL335D Captain 591 Rep 941 Posts Drives: 2013 e92 M3 Q4 Join Date: Apr 2014 Location: Boston iTrader: (2)	Wow! That's a quality piece. __________________ 2013 e92 M3 2011 X5 35d 2018 F80 M3 ZCP
	Appreciate 1 WNS2N_T123.00 Quote

09-19-2020, 07:46 PM	#13979
neilum Captain 1109 Rep 886 Posts Drives: 991.2 GT3 & G05 X5 Join Date: Oct 2012 Location: Bergen County NJ iTrader: (2) Garage List 2018 GT3 [10.00]	Paint correction.
	Appreciate 6 Idfkman477.50 Ajolives1172.50 94jedi875.50 georgebmwM3338.50 bake896.50 M3E90sedan172.50 Quote

09-19-2020, 08:22 PM	#13980
irokwrx Lieutenant 785 Rep 558 Posts Drives: 2011 E92 M3 ESS G1 BC Join Date: Jun 2018 Location: Near the "White" House iTrader: (6)	[QUOTE=Cyberdemon;26701898]Had a mobile repair guy come and touch up some gnarly chips on the 219M's I just bought for winter wheels. Did a pretty good job. Outstanding! __________________ Daily: 2010 Venza Grocery Getter: 16 Q50 Red Sport Track: Top Gear or Grand Tour Concealed Weapon: 11 BMW e92 M3 DCT ESS G1
	Appreciate 0 Quote

09-19-2020, 08:48 PM	#13981
irokwrx Lieutenant 785 Rep 558 Posts Drives: 2011 E92 M3 ESS G1 BC Join Date: Jun 2018 Location: Near the "White" House iTrader: (6)	I installed this wing today, I am waiting for some more wrap so I can remove the trunk wing and re-wrap the trunk. I cant see SHIT! Does anyone know of a universal wing riser? I need about 2-3 more inches. Attached Images __________________ Daily: 2010 Venza Grocery Getter: 16 Q50 Red Sport Track: Top Gear or Grand Tour Concealed Weapon: 11 BMW e92 M3 DCT ESS G1
	Appreciate 1 SAMM3Y3109.50 Quote

09-19-2020, 10:12 PM	#13982
Grip Addict Banned 1083 Rep 713 Posts Drives: ///M3 Join Date: Jun 2018 Location: PA iTrader: (9)	Took a weekend drive.
	Appreciate 0 Quote

09-20-2020, 05:50 AM	#13984
stefan_e36 Second Lieutenant 319 Rep 204 Posts Drives: M3 Coupe e92 competition packa Join Date: Jul 2020 Location: Ukraine iTrader: (0) Garage List 2011 M3 e92 [0.00]	A bit of detailing, looks great after this.
	Appreciate 3 jvictormp1151.00 Ajolives1172.50 PAM3Guy984.50 Quote

09-20-2020, 03:29 PM	#13987
Dpc2u Major 11314 Rep 1,065 Posts Drives: E93 M3, E60 M5, F15 X5, E46 Join Date: Feb 2019 Location: Middle Tennessee iTrader: (0)	Finally got around to recoding the low fuel warning. Went from the annoying 1/4 tank to 1/6th tank. Originally was going to do 1/8th, but I never go that low anyway. __________________ E46, E60 M5, E93 M3, F15 X5 IG - @thebimmerhaus
	Appreciate 2 Space Fox1357.00 PAM3Guy984.50 Quote

09-20-2020, 06:54 PM	#13988
Scrippy Lord Scrip 2390 Rep 3,419 Posts Drives: 2011 M3 Coupe Join Date: Jan 2012 Location: LA,Ca iTrader: (0) Garage List [10.00] 2007 BMW 335i [10.00]	Rear brake rotors, pads and sensor. Just need an alignment now. __________________
	Appreciate 1 PAM3Guy984.50 Quote

09-20-2020, 07:32 PM	#13989
MR_WAR BMW IS LIFE 18 Rep 44 Posts Drives: 2011 E92 M3 Join Date: Nov 2006 Location: Miami, FL iTrader: (0) Garage List 2007 335i [0.00]	I just did my front pads and rotors and Gloss Black M Trunk badge lol. __________________ IG: @MR.WAR 2013 BMW E70 X5M 2011 BMW LWB E92 M3 1995 Porsche 993 1986 Pandem E30
	Appreciate 0 Quote

09-21-2020, 11:17 AM	#13991
XKxRome0ox e90noob 1632 Rep 1,890 Posts Drives: '08 E90 M3 Join Date: Mar 2012 Location: Los Angeles, CA iTrader: (4)	my sister's e92 328i got crushed by a huge oak tree falling on it thankfully it fell into the street and not into their house! and no one was hurt a healthy looking tree falling over from the base of the trunk without any rain/wind... must have been diseased and rotting away inside time to check the trees on your street! this happened in south pasadena __________________ 2008 E90 M3 / LCI trunk + euro tail swap Production date - 2008-04-22
	Appreciate 3 roastbeef11864.50 SoCalRPM926.00 irokwrx785.00 Quote

09-21-2020, 11:25 AM	#13992
s14_kev Major 375 Rep 1,036 Posts Drives: E90 M3, E30 M3 Join Date: Sep 2012 Location: Bay Area, CA iTrader: (21)	Engine stalled while driving on Friday night. Car wouldn't start, it would just crank for a few seconds then stop, so had to get it towed home. It was throwing code P0335 for the crankshaft position sensor. I need my car during the week and of course my dealer was closed Sat/Sun so I ended up replacing it with a Duralast part from Autozone and it seems to be working ok (lifetime warranty if it dies...). I'm not sure what happened to my OE sensor, but here's how it looked when I pulled it out. I'm worried there might be bits of it stuck in the transmission so I might be flushing my fluid soon. Attached Images __________________ Akrapovic \| AngeliBright \| APEX \| Hankook \| IND \| JRZ RS1 \| Macht Schnell \| Mode Carbon \| Vorsteiner
	Appreciate 1 XKxRome0ox1631.50 Quote