![]() |
|
|
| 08-06-2020, 11:38 AM | #1 |
|
Second Lieutenant
![]() 125
Rep 209
Posts |
Replace DCT mechatronic sealing sleeve?
So my car is at the dealer for an oil change and the service advisor just emailed me to say that there is a DCT leak that needs to be fixed. Last year, they pointed out that there was a leak in the DCT but that it wasn't too bad. They didn't do a close enough inspection at the time to determine if it was a crack in the pan or if the gasket was the problem. I have never seen any fluid dripped on the garage floor under the car. I decided then to wait to see if the leak got worse. Now they have done a close inspection and have advised that the mechatronic sealing sleeve (?) must be replaced. This requires that the transmission be removed from the car to access the sleeve. I don't even know what a sealing sleeve is. The estimated cost to replace this $60 part is $3,800 WTF!!! Unfortunately there is no local indy shop that I trust as far as getting into the internals of the engine/transmission. Kind of shocked that after expecting a $200 bill, that I might have to come up with $4,000+.
Anybody know what a mechatronic sealing sleeve is? is it important? what would happen if I don't get it fixed.
__________________
2010 M3 "Edition" model - Monte Carlo Blue/black, (1 of 13) MODS;255/35/19 and 285/30/19 Michelin PSS, Volk G25 wheels, Ohlins RT, MC V2 GTS lip, Eventuri plenum/intake/airbox lid, M Performance exhaust/spoiler/steering wheel |
| 08-06-2020, 12:43 PM | #2 |
|
Major
![]() 434
Rep 1,174
Posts |
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|