|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
09-09-2019, 11:34 PM | #1 |
Major General
995
Rep 5,105
Posts |
Buy my Rogue Engineering Blue Monoball FTAB's installed in OEM arms
This and KW Clubsports were my two favorite mods I did to my E92 M3. I was keeping these Monoballs to install on my F82, but Ben at Rogue just told me that these would need modification to work, so I am going to bite the bullet and buy a new set from Rogue.
By getting these from me you can do this job at home in 1-2 hours depending on your level of proficiency. The thrust arms on E92 M3 are very easy to access and remove/install. No need for a press considering they are already pressed into the arm that I am providing. I put these on shortly after purchasing my car, and I only drove my car about 12k miles, so that means they have <12k miles. Rogue price $389 and I believe thrust arms from FCP Euro are about $150 each, so in my estimation this is a helluva deal. Last edited by Spun Crankhub; 09-21-2019 at 02:56 AM.. |
09-15-2019, 11:40 PM | #8 |
Major General
995
Rep 5,105
Posts |
|
Appreciate
0
|
09-19-2019, 10:38 PM | #11 |
Private First Class
9
Rep 119
Posts
Drives: 135i N54
Join Date: May 2005
Location: Bay Area, CA
|
You can try the 1 series forums as well. Changing to M3 control arms is a common upgrade. Good luck!
|
Appreciate
1
Spun Crankhub994.50 |
09-20-2019, 12:48 PM | #12 |
Major General
995
Rep 5,105
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|