What have you done with or to your M3 today?

turbo_joe · 06-21-2018, 07:25 AM

Broke 58k miles yesterday and of course had to stop for fuel as always. Close to 1000k miles on the rebuilt actuators and no issues so far.

Helmsman · 06-21-2018, 07:37 AM

Quote:

Originally Posted by turbo_joe

Broke 58k miles yesterday and of course had to stop for fuel as always. Close to 1000k miles on the rebuilt actuators and no issues so far.

What a nice and typical position for our dear S65 V8...

spazzyfry123 · 06-21-2018, 11:24 AM

Quote:

Originally Posted by turbo_joe

Broke 58k miles yesterday and of course had to stop for fuel as always. Close to 1000k miles on the rebuilt actuators and no issues so far.

Pretty rad that you can get BMWCCA plates in Maryland.

turbo_joe · 06-21-2018, 12:05 PM

Quote:

Originally Posted by spazzyfry123

Pretty rad that you can get BMWCCA plates in Maryland.

I love that we can because our current plate isn't very nice looking.

XKxRome0ox · 06-21-2018, 02:58 PM

bought used front ST60 brakes and got them installed
i have 5mm spacers up front and 12mm in the rear ... may need to go up to 18mm in rear to fill it out better

next up is a proper car wash and detail

MLife614 · 06-21-2018, 05:24 PM

Quote:

Originally Posted by Gears_and_Gasoline

Painted my new to me Apex EC7's in 18x9.5 square et35, fitted with 15mm spacers rear and 12mm spacers up front.

This should save some wear and tear on my track set up ( arc 8's, 18x10 et 25 with rs4's)

Installed my new red start/stop button and ///M button as well!

Thanks to your post I just ordered mine in "blue " both Start/stop and M button also, will have it in 2 days...and installed this weekend will post later

ItsGary · 06-21-2018, 05:47 PM

Oil Change with Motul 10W60. I drive way too much. Gotta get a daily :'(

Montaver · 06-21-2018, 06:50 PM

Quote:

Originally Posted by XKxRome0ox

bought used front ST60 brakes and got them installed
i have 5mm spacers up front and 12mm in the rear ... may need to go up to 18mm in rear to fill it out better

next up is a proper car wash and detail

Loving those wheels, look much better on the e9x than the F80. Lightweight and forged as well, can't go wrong! Did you buy them used? I often check the f8x section classifieds but never see them.

XKxRome0ox · 06-21-2018, 07:06 PM

Quote:

Originally Posted by Montaver

Loving those wheels, look much better on the e9x than the F80. Lightweight and forged as well, can't go wrong! Did you buy them used? I often check the f8x section classifieds but never see them.

bought the wheels used
513m's don't always show up so you have to just jump on them
right after i purchased my set, i saw a new listing on the f80 forum with tires.. that listing went away in 1 day

i found mine on craigslist of all places
the seller is definitely an enthusiast and the wheels were in near perfect condition
his M coupe had HRE wheels and he had a spare set of Rays CE28's stacked in his garage

i think i saw a square set of 513m 18x10 rear's for sale yesterday
i don't know if the 18x10 et40 works on the front of the e9x or not though

admranger · 06-21-2018, 08:17 PM

Quote:

Originally Posted by Megabrode

Replaced my shredded stock plastic and felt parts with deansbimmer's aluminum undertray. Brilliant solution!

I need to do this. Will it fit in the overhead compartment of a plane? I'm flying through Dallas on Saturday. I'm sure deansbimmer would bring one down to Love Field for me.

turbo_joe · 06-22-2018, 09:52 AM

Pics from my last autocross event

Got to drive my friends 2002 as well

XKxRome0ox · 06-22-2018, 10:56 AM

2008 e90 M3
seller had oil tested in Sept/Oct 2017 at 54,050 miles
lab said "great report"

i bought the car in May 2018 with 57514 miles
replaced rod bearings at 58,692 miles this week
with BE rod bearings and ARP bolts

and this is the condition the rod bearings were in
(they're not in any particular order)
i wanted to do it as insurance and for peace for mind
now i'm really glad that i did it

is there a master thread to post rod bearing condition?

Helmsman · 06-22-2018, 11:28 AM

Quote:

Originally Posted by XKxRome0ox

seller had oil tested in Sept/Oct 2017 at 54,050 miles
lab said "great report"

i bought the car in May 2018 with 57514 miles
replaced rod bearings at 58,692 miles this week

is there a master thread to post rod bearing condition?

Yes there is, further down under Engine etc: http://www.m3post.com/forums/showthr...253084&page=34

wyatth · 06-22-2018, 01:11 PM

Those 513Ms look GREAT there!!!

jd501 · 06-22-2018, 02:00 PM

Car wash

ItsGary · 06-22-2018, 03:17 PM

Did an oil change with Motul X-Power 10W60

$112CAD for 10L and Oil filter kit

Solo_M_Tech · 06-22-2018, 07:23 PM

Woke up to go to work and this happened.... 126K miles was as far as my original TA's were gonna last.
.... luckily I already had spares! I went ahead and replaced both after seeing the gear wear on bank 2.

MLife614 · 06-23-2018, 12:25 PM

Okay, just got done adding some custom buttons. It’s growing on me.😎

pcohen15 · 06-23-2018, 05:03 PM

washed, detailed, and then installed my new Uniden R3 using a BlendMount (with which I could not be happier) and MirrorTaps for power.

PAM3Guy · 06-23-2018, 05:11 PM

Installed my new BMW CF High Kick spoiler and re-coded my fuel warning to 1/8 tank via Carly.

vincE92M3 · 06-23-2018, 08:00 PM

Wash, wax, brake fluid flush and oil change!

admranger · 06-24-2018, 09:45 AM

Quote:

Originally Posted by vincE92M3

Wash, wax, brake fluid flush and oil change!

Which jack stands are those? They look sturdy. Something I need to worry about now that I have to use jack stands...

I miss my lift and big garage.

06-21-2018, 07:25 AM	#6293
turbo_joe Lieutenant Colonel 1685 Rep 1,617 Posts Drives: 2012 M3 Coupe Join Date: Jul 2015 Location: SOMD iTrader: (2)	Broke 58k miles yesterday and of course had to stop for fuel as always. Close to 1000k miles on the rebuilt actuators and no issues so far. __________________ 2012 E92 M3 Instagram Turbo__Joe
	Appreciate 1 PAM3Guy984.50 Quote

06-21-2018, 02:58 PM	#6297
XKxRome0ox e90noob 1632 Rep 1,890 Posts Drives: '08 E90 M3 Join Date: Mar 2012 Location: Los Angeles, CA iTrader: (4)	bought used front ST60 brakes and got them installed i have 5mm spacers up front and 12mm in the rear ... may need to go up to 18mm in rear to fill it out better next up is a proper car wash and detail __________________ 2008 E90 M3 / LCI trunk + euro tail swap Production date - 2008-04-22
	Appreciate 1 vincE92M3587.50 Quote

06-21-2018, 05:47 PM	#6299
ItsGary Colonel 1473 Rep 2,340 Posts Drives: 2009 E90 M3 Join Date: Oct 2017 Location: Vancouver iTrader: (0)	Oil Change with Motul 10W60. I drive way too much. Gotta get a daily :'( __________________ '09 ///M3 Sedan - Jerez Black/Fox Red Ext. '09 335i Coupe - Alpine White/Black - SOLD
	Appreciate 0 Quote

06-22-2018, 09:52 AM	#6303
turbo_joe Lieutenant Colonel 1685 Rep 1,617 Posts Drives: 2012 M3 Coupe Join Date: Jul 2015 Location: SOMD iTrader: (2)	Pics from my last autocross event Got to drive my friends 2002 as well __________________ 2012 E92 M3 Instagram Turbo__Joe
	Appreciate 1 XKxRome0ox1631.50 Quote

06-22-2018, 10:56 AM	#6304
XKxRome0ox e90noob 1632 Rep 1,890 Posts Drives: '08 E90 M3 Join Date: Mar 2012 Location: Los Angeles, CA iTrader: (4)	2008 e90 M3 seller had oil tested in Sept/Oct 2017 at 54,050 miles lab said "great report" i bought the car in May 2018 with 57514 miles replaced rod bearings at 58,692 miles this week with BE rod bearings and ARP bolts and this is the condition the rod bearings were in (they're not in any particular order) i wanted to do it as insurance and for peace for mind now i'm really glad that i did it is there a master thread to post rod bearing condition? __________________ 2008 E90 M3 / LCI trunk + euro tail swap Production date - 2008-04-22 Last edited by XKxRome0ox; 06-22-2018 at 12:14 PM..
	Appreciate 0 Quote

06-22-2018, 01:11 PM	#6306
wyatth Brigadier General 3968 Rep 3,018 Posts Drives: E90 M3, G05 X5 Join Date: Dec 2007 Location: Bay Area iTrader: (1)	Those 513Ms look GREAT there!!!
	Appreciate 0 Quote

06-22-2018, 02:00 PM	#6307
jd501 Lieutenant 422 Rep 408 Posts Drives: 2011 E92 M3 Join Date: Mar 2016 Location: Los Angeles iTrader: (0)	Car wash Attached Images Last edited by jd501; 06-22-2018 at 03:21 PM..
	Appreciate 0 Quote

06-22-2018, 03:17 PM	#6308
ItsGary Colonel 1473 Rep 2,340 Posts Drives: 2009 E90 M3 Join Date: Oct 2017 Location: Vancouver iTrader: (0)	Did an oil change with Motul X-Power 10W60 $112CAD for 10L and Oil filter kit __________________ '09 ///M3 Sedan - Jerez Black/Fox Red Ext. '09 335i Coupe - Alpine White/Black - SOLD
	Appreciate 0 Quote

06-22-2018, 07:23 PM	#6309
Solo_M_Tech Brigadier General 1725 Rep 3,149 Posts Drives: 2014 M5 6MT Join Date: Nov 2013 Location: Massachusetts iTrader: (7) Garage List 2014 BMW M5 [0.00]	Woke up to go to work and this happened.... 126K miles was as far as my original TA's were gonna last. .... luckily I already had spares! I went ahead and replaced both after seeing the gear wear on bank 2. Attached Images __________________ 2014 M5 6MT Last edited by Solo_M_Tech; 06-23-2018 at 12:13 AM..
	Appreciate 4 Tim_M56274.50 PAM3Guy984.50 Teufel_Hunden8349.00 roastbeef11864.50 Quote

06-23-2018, 12:25 PM	#6310
MLife614 Captain 1476 Rep 967 Posts Drives: 2018 X5M F85 Black Sapphire Join Date: Mar 2017 Location: OHIO iTrader: (0) Garage List 2026 BMW G80 M3 Com ... [9.75] 2018 BMW F85 X5M [9.75]	Okay, just got done adding some custom buttons. It’s growing on me.😎 Attached Images
	Appreciate 2 ItsGary1473.00 PAM3Guy984.50 Quote

06-23-2018, 05:03 PM	#6311
pcohen15 Lieutenant 396 Rep 533 Posts Drives: 2013 F10 M5, Singapore Gray Join Date: Jun 2016 Location: Scottsdale, AZ iTrader: (0)	washed, detailed, and then installed my new Uniden R3 using a BlendMount (with which I could not be happier) and MirrorTaps for power. Attached Images __________________ 1972 Bavaria> 1973 3.0Si> 2013 328i> 2009 E92 M3> 2013 F10 M5: Singapore Gray over Sakhir Orange, Executive, Driving Assistance, B&O
	Appreciate 3 PAM3Guy984.50 Todd0131371.50 Tim_M56274.50 Quote

06-23-2018, 05:11 PM	#6312
PAM3Guy Major 985 Rep 1,137 Posts Drives: 2012 E92 M3 DCT ZCP Join Date: Nov 2015 Location: Philly burbs, PA iTrader: (1) Garage List 2012 E92 M3 [8.90] 2018 F48 X1 (Daught ... [0.00] 2019 G01 X3 (wife's) [0.00]	Installed my new BMW CF High Kick spoiler and re-coded my fuel warning to 1/8 tank via Carly. Attached Images __________________ 2012 E92 M3 \| ZCP \| DCT \| Space Grey Metallic \| Black Novillo \| BE/ARP \| MPE V2 \| do88 DCT cooler \| Vorschlag \| Solid SF Bushings \| BMW CF Rear Spoiler, RW Carbon Diffuser, CF Front Splitters \| DTEC 160W Angel Eyes Last edited by PAM3Guy; 06-24-2018 at 07:27 PM..
	Appreciate 0 Quote

06-23-2018, 08:00 PM	#6313
vincE92M3 Major 588 Rep 1,370 Posts Drives: ///M Join Date: Nov 2012 Location: Atlanta, GA iTrader: (3) Garage List '11 E92 M3 [0.00]	Wash, wax, brake fluid flush and oil change! Attached Images __________________ ///My OEM+ Silverstone Stripper
	Appreciate 3 PAM3Guy984.50 Tewie206.50 ItsGary1473.00 Quote