carrilo Rods on stock pistons??

R_lara · 06-03-2018, 11:04 AM

https://store.vacmotorsports.com/mob...t-8-p2744.aspx

Can these be used with stock Pistons? I just want to Run 10-11 Psi safe.

Thanks

pbonsalb · 06-03-2018, 11:26 AM

Piston strength becomes an issue as well. Since heads must come off consider replacing pistons as well. There are alusil compatible pistons.

R_lara · 06-03-2018, 01:11 PM

any idea how much whp is safe with forged rods and Pistons?

8500RPM · 06-03-2018, 01:17 PM

I've read around 800hp a couple times here but not many people forge their S65 internals so not much data to back it up

Weyne Masters · 06-03-2018, 05:25 PM

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

R_lara · 06-03-2018, 05:38 PM

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart[/QUOTE]

Wow, can you please list mods and where can the Drew fuel system be purchased ?

thanks.

Richard

Weyne Masters · 06-03-2018, 05:41 PM

Quote:

Originally Posted by R_lara

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

Wow, can you please list mods and where can the Drew fuel system be purchased ?

thanks.

Richard[/QUOTE]

Quote:

Originally Posted by R_lara

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

Wow, can you please list mods and where can the Drew fuel system be purchased ?

thanks.

Richard[/QUOTE]
I do not use drew sistem !
For that kind off power you must change Fuel Lines 10 AN
Fuel Rail 10 AN
Radium Catch thank with 3 Bigger Walbros
And a bunch off Stuff
I suggest you search for Steven Dinna ,and ask a quote for project!

SVH · 06-03-2018, 06:03 PM

Quote:

Originally Posted by Weyne Masters

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

IMG · 06-04-2018, 03:37 AM

Quote:

Originally Posted by Weyne Masters

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

Quote:

Originally Posted by Weyne Masters

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Quote:

Originally Posted by R_lara

any idea how much whp is safe with forged rods and Pistons?

Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!!
Sooner I will provide a Dyno chart

Exciting. Can't wait to see some real power.

R_lara · 06-04-2018, 09:42 AM

Exciting. Can't wait to see some real power.[/QUOTE]

I just want to run a good solid 600-630 Whp.

pbonsalb · 06-04-2018, 10:54 AM

Then you will be just a little over 400 lbs rwtq and the stock rods should be OK. But you must accept that you are taking a risk. You have to maintain the most octane reasonably possible at the power level you want.

Weyne Masters · 06-04-2018, 01:52 PM

Quote:

Originally Posted by R_lara

Exciting. Can't wait to see some real power.

I just want to run a good solid 600-630 Whp.[/QUOTE]

Quote:

Originally Posted by R_lara

Exciting. Can't wait to see some real power.

I just want to run a good solid 600-630 Whp.[/QUOTE]
For Small power like that ,you may call Gintani,they has a especial Tunning and Fuel sistem for e-85. With stock engine and V2TI they achieved 711 WHP

06-03-2018, 11:04 AM	#1
R_lara First Lieutenant 83 Rep 317 Posts Drives: E90 2009 M3 Ess VT2650, F30 33 Join Date: May 2012 Location: Santo Domingo iTrader: (0)	carrilo Rods on stock pistons?? https://store.vacmotorsports.com/mob...t-8-p2744.aspx Can these be used with stock Pistons? I just want to Run 10-11 Psi safe. Thanks
	Appreciate 0 Tweet Quote

06-03-2018, 11:26 AM	#2
pbonsalb Lieutenant General 7679 Rep 13,759 Posts Drives: 18 F90 M5, 99 E36 M3 Turbo Join Date: Feb 2011 Location: New England iTrader: (4)	Piston strength becomes an issue as well. Since heads must come off consider replacing pistons as well. There are alusil compatible pistons.
	Appreciate 1 R_lara83.00 Quote

06-03-2018, 01:11 PM	#3
R_lara First Lieutenant 83 Rep 317 Posts Drives: E90 2009 M3 Ess VT2650, F30 33 Join Date: May 2012 Location: Santo Domingo iTrader: (0)	any idea how much whp is safe with forged rods and Pistons?
	Appreciate 0 Quote

06-03-2018, 01:17 PM	#4
8500RPM First Lieutenant 158 Rep 302 Posts Drives: 2012 M3 CP Join Date: Dec 2017 Location: Ft. Lauderdale, FL iTrader: (0)	I've read around 800hp a couple times here but not many people forge their S65 internals so not much data to back it up
	Appreciate 0 Quote

06-03-2018, 05:38 PM	#6
R_lara First Lieutenant 83 Rep 317 Posts Drives: E90 2009 M3 Ess VT2650, F30 33 Join Date: May 2012 Location: Santo Domingo iTrader: (0)	Easily More than 1000 WHP you may find pistons ,Pind rods and bolts up to 1500 HP!!! Sooner I will provide a Dyno chart[/QUOTE] Wow, can you please list mods and where can the Drew fuel system be purchased ? thanks. Richard
	Appreciate 0 Quote

06-04-2018, 09:42 AM	#10
R_lara First Lieutenant 83 Rep 317 Posts Drives: E90 2009 M3 Ess VT2650, F30 33 Join Date: May 2012 Location: Santo Domingo iTrader: (0)	Exciting. Can't wait to see some real power.[/QUOTE] I just want to run a good solid 600-630 Whp.
	Appreciate 0 Quote

06-04-2018, 10:54 AM	#11
pbonsalb Lieutenant General 7679 Rep 13,759 Posts Drives: 18 F90 M5, 99 E36 M3 Turbo Join Date: Feb 2011 Location: New England iTrader: (4)	Then you will be just a little over 400 lbs rwtq and the stock rods should be OK. But you must accept that you are taking a risk. You have to maintain the most octane reasonably possible at the power level you want.
	Appreciate 1 R_lara83.00 Quote