What have you done with or to your M3 today?

[Kenith]

Originally Posted by BMWNTHZST

That's a badass looking E93

Thanks!!!!

[QUOTE=Dlpfcb;22847335]

Originally Posted by Kenith

I finished my weekend project upgrades

Beautiful car, what side skirts are you running.

Thank you! forcewerkz

[Ajc1100]

Dropped it off to get the rod bearings done

[BOOF-M3]

New plugs, oil change, breather valve and dressed up the engine a bit. Thanks jimmy "soho" for a big hand. Brake pads on Friday.

[shimmy23]

Originally Posted by 6ixSpd

Hoarded parts for wheels I don't even have yet

Best replica caps I’ve seen

[6ixSpd]

Originally Posted by shimmy23

Best replica caps I’ve seen

It's a good idea to visit an optometrist every now and then. Seems like that script is long expired.

[GORDON.M3]

Originally Posted by BOOF-M3

New plugs, oil change, breather valve and dressed up the engine a bit. Thanks jimmy "soho" for a big hand. Brake pads on Friday.

looks good!
I also got my breather valve ready to be replaced. ordered it from rockauto, oem part!

[CjM3]

Got the brake fluid flushed and an oil change. Next up Front rotors/pads, Air filters, and ngk plugs.

[b4hand]

Picked it up from getting new suspension. JRZ Rs1 with hyperco 500/800 springs. GC Camber plates, GC Rear toe arms, Hotchkins front sway, BW front endlinks. She rides so good now, just need to get rid of the edc fault.

[Helmsman]

Originally Posted by Kenith

I finished my weekend project upgrades

View post on imgur.com

Yesss, that motor is looking crazy cool!

[ItsGary]

My heat shield is out of place in the rear

[Helmsman]

Originally Posted by BOOF-M3

New plugs, oil change, breather valve and dressed up the engine a bit. Thanks jimmy "soho" for a big hand. Brake pads on Friday.

Need to keep working on that engine detail bruh.

[SohoE93]

Originally Posted by Helmsman

Need to keep working on that engine detail bruh.

After BooF used a whole case of WD-40 it was still a mess. One day he’ll get there!

[The-Traveler]

Took her out of storage and dropped her off just as the snow started. Airbag recall finally in stock! Also, getting a full car inspection (@325+tax) in order to keep my rust warranty.

This was after my 330 was rejected based on me not doing 2 year inspections on it.

In 2015 when I had my e46 they didn't abide by the fine print in the warranty card and just painted the car a bunch of times.

Turns out that because a mini club advertised this online and they were notorious for rusting, BMW tighten up their purses.

I've never done it before on the M but it's super low mileage so they won't find anything. Hopefully in 4 years when they do, it will be covered.

[notouching]

Replaced the heater control unit. The "all" button was broken on the original part.

[irfan5911]

Finally finished installing the Bavauto lip. I had to design and 3D printed mounts.

https://www.bavauto.com/e92m3exocflip

[Dlpfcb]

Originally Posted by irfan5911

Finally finished installing the Bavauto lip. I had to design and 3D printed mounts.

https://www.bavauto.com/e92m3exocflip

Just looked at the link, this lip looks great. And for the price its even better. When you say you had to make mounts is this lip not pre drilled or do I need to drill it. Thank you, got me considering it now but they are out of stock thanks for buying the last one.

[E92 Mpower]

In Apr-2017, added a VF620 SC, Autowerkes Exhaust, and replaced the rod bearings for a peace-of-mind. DynoJet results are 580 WHP @ 7400 RPM! Also added Toyo R888’s to gain traction and minimize traction control from slowing me down,,,

[Powashiftin]

Originally Posted by irfan5911

Finally finished installing the Bavauto lip. I had to design and 3D printed mounts.

https://www.bavauto.com/e92m3exocflip

Please share details

[irfan5911]

Originally Posted by Dlpfcb

Just looked at the link, this lip looks great. And for the price its even better. When you say you had to make mounts is this lip not pre drilled or do I need to drill it. Thank you, got me considering it now but they are out of stock thanks for buying the last one.

So. There are holes on the underside that allow you to access the factory screw and holes on the bottom side of the front bumper. I can share my 3D files if needed. What I did was I put the 3DP mounts on using the factory holes and screws. And then mounted the lip to the bumper with the double sided tape AND then I screwed the bumper into the mounts. So yes, with my method you do have to drill the lip. But not the car. You can remove the lip in the future without fear.

[irfan5911]

Originally Posted by Powashiftin

Please share details

Details are in my post above.

[ItsGary]

Gonna clean my interior. Ordered cabin air filters also.

My heatshield is still hanging

[Dlpfcb]

Originally Posted by irfan5911

Details are in my post above.

How do you feel about the overall quality of the carbon fiber. Fitment looks pretty good maybe just wish it sat a little more flush on the front part but for $350 I can live with it. Thank you!