What have you done with or to your M3 today?

[vincE92M3]

Dropped my Euro bumper off for paint!

Finally, after sitting in my storage unit for 1.5 years

[Huen]

Originally Posted by gordon@

Got it! Noticed a difference in throttle response, I have no tune yet but I'm sure it made a difference in making the pick-up smoother and quicker. If you pair it with a tune you will get much better gains!

Originally Posted by b4hand

Just installed these as well. Throttle response is just a bit sharper when not in Power mode. Sometimes I mistake it for being in Power mode.

Great!! seem I need to place order asap.! ha
thankyous guys

[ByeFelicia]

Originally Posted by cliverman

Just a little fun....
New SpartaEvo Brakes 380/355s and painted reflectors.
Thanks to Vinnie @ Sparta for the great setup.

Nice! Did you go with their Triton setup or Saturn?

I'm pretty close to getting a set from them

[cliverman]

Originally Posted by ByeFelicia

Nice! Did you go with their Triton setup or Saturn?

I'm pretty close to getting a set from them

Saturn BBK!! Great brakes. Huge! Make sure you check your wheel clearance. Highly recommend working with these guys.
Vinnie is the man!

[ItsGary]

Originally Posted by 6ixSpd

I was replying to a post from a member who had an old guy crash into his M3, after 4 accidents on his record. Not sure where that went, or maybe it was deleted.

Thread pages have been glitched for me, usually happens around 195-200 pages before a new thread should be made.

4 accidents in 6 months of ridiculous, if I really want him off the road I'd have to write in a letter and have a lawyer send it in to ICBC.

But my pain has been all over the place, I'm starting to get better but I might have a concussion, going to get checked out tomorrow.


http://www.m3post.com/forums/showthr...7#post22302717

[ByeFelicia]

Originally Posted by cliverman

Saturn BBK!! Great brakes. Huge! Make sure you check your wheel clearance. Highly recommend working with these guys.
Vinnie is the man!

Sweet! That's what i'm looking at. I got 19' LM's and Trevor said they should clear. It seems their customer service is good no matter who it is

[cliverman]

Originally Posted by ByeFelicia

Sweet! That's what i'm looking at. I got 19' LM's and Trevor said they should clear. It seems their customer service is good no matter who it is

Sparta is a great company to work with. Post some pics. When the four boxes showed up at the front door (almost killed the UPS guy) it was like XMAS for the car.

[Varsani]

New shift Raceseng Ashiko knob and front lip

[Raek]

Giving it a much needed detail after last weekend's super wet car show.

[carenthuziast]

Originally Posted by Varsani

New shift Raceseng Ashiko knob and front lip

What do you have for your rear mats?

[GORDON.M3]

Originally Posted by Raek

Giving it a much needed detail after last weekend's super wet car show.

Holy, this colour looks so damn good.

[Ngilbe36]

Originally Posted by 6ixSpd

I thought so too, but then I couldn't find that post. Just did a full search for it.... So weird lol.

I saw it somewhere the other day too. You are not crazy. That old man must have been though...

[6ixSpd]

Originally Posted by pasghetti

Haha. Stressful week?

Originally Posted by ItsGary

Thread pages have been glitched for me, usually happens around 195-200 pages before a new thread should be made.

4 accidents in 6 months of ridiculous, if I really want him off the road I'd have to write in a letter and have a lawyer send it in to ICBC.

But my pain has been all over the place, I'm starting to get better but I might have a concussion, going to get checked out tomorrow.


http://www.m3post.com/forums/showthr...7#post22302717

Damn, there it is! Hope you bounce back and find yourself in another E9X M3 soon. You should seriously sue or at least get that guy off the roads before he kills someone.

Originally Posted by Ngilbe36

I saw it somewhere the other day too. You are not crazy. That old man must have been though...

I knew I wasn't losing my mind! Ha!

[ualdrivr]

Check it

Scroll to my last post

http://www.m3post.com/forums/showthr...1362527&page=4

[timothy2001]

Had three step paint correction and Ceramic Pro applied. Had no idea how hammered my paint was as it had enough wax on it to hide most of the damage and without looking close you really did not notice.

Looks incredible now.

[jd501]

Originally Posted by timothy2001

Had three step paint correction and Ceramic Pro applied. Had no idea how hammered my paint was as it had enough wax on it to hide most of the damage and without looking close you really did not notice.

Looks incredible now.

How did you take out your side markers? I have carbon fiber ones I've been sitting on for months because I can't get them out. Scoured the internets, can't seem to get either the packing tape or screwdriver to the side methods to work for me. Thinking at this point I'm just going to ask the shop to take the wheels and fender lining off and unclip them from the inside.

[ualdrivr]

Originally Posted by timothy2001

Had three step paint correction and Ceramic Pro applied. Had no idea how hammered my paint was as it had enough wax on it to hide most of the damage and without looking close you really did not notice.

Looks incredible now.

wow, that looks fantastic What a difference. I am considering a treatment like that.

[timothy2001]

Originally Posted by jd501

How did you take out your side markers? I have carbon fiber ones I've been sitting on for months because I can't get them out. Scoured the internets, can't seem to get either the packing tape or screwdriver to the side methods to work for me. Thinking at this point I'm just going to ask the shop to take the wheels and fender lining off and unclip them from the inside.

Pretty sure there is a DIY on that but I just carefilly pried the orange ones out and the smoke ones pressed in. The side grilles were even easier but scarey as you really have to yank them out with tape, great DIY for that too.

[GORDON.M3]

Originally Posted by timothy2001

Had three step paint correction and Ceramic Pro applied. Had no idea how hammered my paint was as it had enough wax on it to hide most of the damage and without looking close you really did not notice.

Looks incredible now.

looks so good, like liquid!!

[ualdrivr]

Originally Posted by jd501

How did you take out your side markers? I have carbon fiber ones I've been sitting on for months because I can't get them out. Scoured the internets, can't seem to get either the packing tape or screwdriver to the side methods to work for me. Thinking at this point I'm just going to ask the shop to take the wheels and fender lining off and unclip them from the inside.

The side bumper reflectors are easy, just stick your nails/fingers on the top of them push down and out they go. As far as the gills go, there's a video on YouTube for that. The guy uses packing tape. I followed his example and it worked perfectly Here's a link.

https://m.youtube.com/watch?v=7LqFr9KCklQ

[jd501]

Originally Posted by ualdrivr

The side bumper reflectors are easy, just stick your nails/fingers on the top of them push down and out they go. As far as the gills go, there's a video on YouTube for that. The guy uses packing tape. I followed his example and it worked perfectly Here's a link.

https://m.youtube.com/watch?v=7LqFr9KCklQ

Thank you, trying to get the gills out. Tried the packing tape method a couple times and can't seem to pull hard enough. I'll give it another go.

[rdoctor]

Originally Posted by timothy2001

Had three step paint correction and Ceramic Pro applied. Had no idea how hammered my paint was as it had enough wax on it to hide most of the damage and without looking close you really did not notice.

Looks incredible now.

Beautiful. Love the wheel color on jet black. I've also got an e92 M3 in jet black and your post makes me want to get this done to my paint as well!