YCW Engineering CF drive shaft

[whats77inaname]

BIMMERPOST / Classifieds

Asking Price:

USD 1,150.00

Location:

✓ Will Ship

Item Interest

I'll be moving to Europe for a bit in a few months so I'll be parting the car (E90 6MT) over the next few weeks prior to selling it. I'll be posting items (ESS 625 kit w/add'l pulleys and injectors, custom MRF Engineering catted x-pipe, custom UUC Corsa exhaust, etc).

I have a YCW Engineering carbon fiber driveshaft for sale ATM. It is BNIB, never installed. I paid $1150 shipped to me in the group buy, so that's my price to you. These are now selling for $1500 + shipping. http://store.ycwengineering.com/cata...YCW-TRS-13E92M I'm also throwing in 2 free rolls of header wrap that I'll no longer be needing (https://www.amazon.com/gp/product/B015OVUAS6/). You're responsible for PP fees. Local pickup is welcome.

[Leglessracing]

I know a few people looking. Do you have a list of other parts for sale at all?

[whats77inaname]

I'll be working on the list shortly as I start pulling parts off the car this weekend. I have my ESS manifold out being finished to match my brake calipers, so unfortunately, both of those are out so I can't sell either :-\ The highlights include:

What will be coming off the car:
-custom MRF Engineering x-pipe catted w/HJS 100 cell high flow cats (4" cores)
http://www.m3post.com/forums/showthread.php?t=964317

-UUC Corsa exhaust w/the mufflers and custom tips ceramic coated black

already off the car
-Awron DGA I w/velocity stack and boost gauge.

-ESS 600 kit with white *and* blue injectors, + 94mm pulley, 89mm custom back-milled pulley, and one add'l pulley, so it's a 625, or 625+ kit for someone that wants to get bigger injectors and a custom tune to match the smaller pulley. Manifold is being re-gel coated, painted w/glow in the dark paint, and ceramic coated. (The color between the calipers and the mani was slightly off, so the painter is going to correct that.)
http://www.m3post.com/forums/showpos...2&postcount=23

-Albert racing BBK, already painted glow in the dark blue and ceramic cleared.
http://www.m3post.com/forums/showpos...&postcount=300 These were never installed, and come with 2 sets of front and rear pads.

-P3 boost gauge upgraded to read AFR and with an AEM oil pressure switch w/Macht Schnell splitter/Y (the Macht Schnell is no longer made) that will allow the stock oil pressure switch and the AEM unit to be utilized simultaneously.
http://www.m3post.com/forums/showthread.php?t=1104869


-Trying to decide whether the 19" TE37 Time Attacks w/R888s will come with the car or if I'll sell them separately.
http://www.m3post.com/forums/showpos...&postcount=337

The car itself is a 2008 AW/Novillo 6MT w/68k. Rod bearing were replaced in Nov2016 w/BE bearings and BE rod bearing bolts. Subframe/diff bushings are Turner/MRF, respectively. Ground Control coilovers and camber plates, with extra bushings when those finally wear. CIC upgrade, LCI rear taillight conversion, lit door sills, SS trim and an extra set of carbon leather, as well. Painted reflectors, and some other custom touches round things out.

[///M3 Gusta]

I'm interested in a price on the X pipe.

[whats77inaname]

Originally Posted by ///M3 Gusta

I'm interested in a price on the X pipe.

Yeah, I've gotten a lot of msgs about that already. I paid $2800 for it, used. Spent $1600 catting it. Figure the used price is the used price, and I'll eat 1/2 the price of modding it in depreciation, so I'm looking for $3600.

I would highly, *highly* recommend picking up a Corsa rear, as it really helps keep the noise down until you want it to be really loud.

[Todd0131]

Price on brakes? Can pick up. Thanks

Todd

[whats77inaname]

Originally Posted by Todd0131

Price on brakes? Can pick up. Thanks

Todd

I paid $3150 USD for the setup, and an add'l $300 for paint and refinish. I have the original pads, plus a front/rear set of these: http://www.m3post.com/forums/showpos...&postcount=267

The rear calipers have the V.2 bracket so that they sit correctly. Never been installed. I'll sell at $3250. Currently, due to exchange rates, this kit is $3800+ and you can verify that on his site:
https://www.akmotorsport.net/shop/al...disc-full-kit/
https://www.akmotorsport.net/shop/al...disc-full-kit/

[kamber]

Whoever snags that AS 25% SSK is going to be in for a treat! GLWS!

[whats77inaname]

bump!

[SpookM3]

I wan that damn Driveshaft

[whats77inaname]

Originally Posted by SpookM3

I wan that damn Driveshaft

Make it happen, man! I want it gone *lol*. Hard to beat g/b pricing when the g/b is over. No mark up AT ALL.

[aus]

Bump because the exhaust sounds SICK!!
Good luck with the move.
.

[arvinz]

This is a shot in the dark but is the drive shaft still available?