|
|
08-03-2015, 11:28 AM | #1 |
Private First Class
22
Rep 124
Posts
Drives: 2013 E92 M3 ZCP
Join Date: Sep 2013
Location: Pittsburgh, PA
|
iphone 6/6+ cradle
Anybody seen this:
Part number: 84212365786 Genuine BMW Universal Adapters for Apple iPhone 6/6+ and Android Devices for vehicles with SA 6NF and 6NS specific to NBT vehicles produced from 3/2013 and on. These include many MY2013 SA 6NF 6NR optioned vehicles and most MY2014 forward SA 6NF / 6NS vehicles. Features include:
Not sure if it is compatible with CIC, but my car has 6NF and 6NR... |
08-03-2015, 12:54 PM | #2 |
Brigadier General
2397
Rep 3,781
Posts
Drives: 2018 M2
Join Date: Mar 2014
Location: Boston, MA
|
It'll probably go for almost $300. Just spend $75 on a Tune2Air and open the ashtray door and place your phone against the door and the indent at the bottom
|
Appreciate
0
|
08-15-2015, 09:02 PM | #3 |
Lieutenant
177
Rep 588
Posts |
I bought this. It runs around $225.
If you're hoping your iPhone 6 Plus will fit, the answer is NO. The center armrest area is too small for the 6 Plus to sit in the cradle normally. The 6 will definitely fit fine. With the 6 Plus your phone will fit diagonally in the armrest, and you won't be able to use the clip to hold the phone in place. Charging and BMW Apps works fine with this cradle. Haven't played with anything else yet. If you have a 6 Plus, you're probably better off just using a lightning cable in the armrest. The cradle doesn't help you organize in there any better than without. Worth a closer look if you have the 6.
__________________
2013 E92 M3 (the weekend good weather car), 2018 Tesla Model 3 Performance (the 20k mi/yr beater)
|
Appreciate
0
|
07-12-2016, 10:42 PM | #4 |
Private First Class
24
Rep 159
Posts |
What annoys me most with these as there is no slack for any case. Therefore you have to take the phone out.
Considering what they cost is it too much to ask BMW for some smart design to take a decent case as a minimum? Hmmm.... |
Appreciate
0
|
09-18-2016, 11:46 PM | #6 |
Lord Scrip
1861
Rep 3,050
Posts
Drives: 2011 M3 Coupe
Join Date: Jan 2012
Location: LA,Ca
|
Why not just wire up the video to iPhone without the snap in adapter if you don't want to buy one? Just run an fbas cable to back of CIC (pair of wire) and make it up to an RCA female and buy the iPhone cable with video and audio RCA outputs? Combine that with video in motion and your done.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|