![]() |
|
|
| 10-11-2015, 12:49 PM | #1 |
|
Lieutenant Colonel
![]() 688
Rep 1,749
Posts |
100 octane NA tune 37 degrees timing
So I am low mileage evolve catless xpipe setup and have been working with a known tuner on a 100 octane tune which I have at the pump. Kind of pricey but not an issue to extract even a few more hp. I have a tune targeting 37 degrees timing and will need to get to a dyno and log some data to see if its hitting the target and whether it even makes more power.
I was wondering if anyone has played around with higher timing targets on race fuel and where the line of diminishing returns perhaps is providing IAT's are low enough and no premtive timing is pulled |
| 10-11-2015, 01:01 PM | #2 |
|
Lieutenant General
![]() ![]() ![]() 7679
Rep 13,759
Posts |
Have not checked my timing but I run a Vishnu Procede advancing timing while two methanol nozzles are spraying. I have heard meth injection with 93 works out to about the same as 100.
|
|
Appreciate
0
|
| 10-11-2015, 04:20 PM | #4 |
|
Lieutenant General
![]() ![]() ![]() 7679
Rep 13,759
Posts |
I think I can look up the tables in the tune. They are user changeable though I have not fiddled. Probably could since they are for 91 to 93 with meth and I run 93. I'll be back next week.
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|