Throttle Body clamps: OEM P/N or alternatives

mikeokimster · 09-08-2015, 11:09 AM

Tried searching but the closest i found were for the E46 throttle body boot clamps at 3-4$ a piece on ECS.

I need to have the P/N#'s for the "one time use" throttle body boot(coupler) to the intake manifold clamps or any any good alternatives. Would be great to have these stocked up.

JEllis · 09-08-2015, 01:04 PM

www.realoem.com is a great tool

http://www.realoem.com/bmw/enUS/show...diagId=11_4129

mikeokimster · 09-08-2015, 01:04 PM

Quote:

Originally Posted by JEllis

www.realoem.com is a great tool

Yes it is but could not locate it based off the schematics

JEllis · 09-08-2015, 01:24 PM

Quote:

Originally Posted by mikeokimster

Yes it is but could not locate it based off the schematics

Posted a link for you

mikeokimster · 09-08-2015, 01:25 PM

Quote:

Originally Posted by JEllis

Quote:

Originally Posted by mikeokimster

Yes it is but could not locate it based off the schematics

Posted a link for you

Thank you sir!

JEllis · 09-08-2015, 01:26 PM

The one time use clamps are #6 - 11617838284

Leonardo629 · 09-08-2015, 01:50 PM

I see three part#s for the clamps, which do you use if you ever need to remove the plenum to get to say...throttle actuators and stuff?

JEllis · 09-08-2015, 02:00 PM

If your removing the intake manifold you only have to loosen the eight standard hose clamps and then lift. The rubber boots will stay attached to the TBs via the one time use clamps.

Leonardo629 · 09-08-2015, 02:40 PM

thanks!

mikeokimster · 09-08-2015, 03:01 PM

Quote:

Originally Posted by JEllis

The one time use clamps are #6 - 11617838284

I actually need the #5 clamp. Not quite the single use per my description but he dealer wants $7ea?! Da funk

8600RPM · 09-09-2015, 10:10 AM

You can't afford a 7 dollar part?

mikeokimster · 09-09-2015, 10:19 AM

Quote:

Originally Posted by 8600RPM

You can't afford a 7 dollar part?

Affordability and willing to spend are two totally different points. I hope you are smart enough to understand the difference

JEllis · 09-09-2015, 10:23 AM

Quote:

Originally Posted by mikeokimster

I actually need the #5 clamp. Not quite the single use per my description but he dealer wants $7ea?! Da funk

I ordered replacements not too long ago. I still have a couple. If you look at them they are somewhat unusual in width and size, I am not sure you could find a suitable generic alternative at a better price point.

2bits · 09-09-2015, 04:52 PM

Quote:

Originally Posted by mikeokimster

Affordability and willing to spend are two totally different points. I hope you are smart enough to understand the difference

Also, $7x8 plus tax is $61, or you can pay $31 online (best shipped price I found).

pbonsalb · 09-09-2015, 09:13 PM

How are you ruining 8 clamps removing the manifold? If you are, you should not be working on the car. No need to replace TB clamps except the lower ones and you have no need to remove those.

09-08-2015, 11:09 AM	#1
mikeokimster Lieutenant Colonel 238 Rep 1,700 Posts Drives: e90 jerez m3 Join Date: Sep 2005 Location: North Seattle, WA iTrader: (10)	Throttle Body clamps: OEM P/N or alternatives Tried searching but the closest i found were for the E46 throttle body boot clamps at 3-4$ a piece on ECS. I need to have the P/N#'s for the "one time use" throttle body boot(coupler) to the intake manifold clamps or any any good alternatives. Would be great to have these stocked up. __________________ Current: 10' E90 Jerez M3 DCT ///Mods: Xpel front clip wrap, Nokya 2500k H8 halos, matte grills, IND reflectors, scoops, MS drop-in, MS track pipes, Dinan exhaust, 240E, ESS tune, BBS CHR, s04 255x35 295x30, KW Clubsports, ceramic pads Retired: 08' E92 328i JB 6mt 212 rwhp 190 rwtq
	Appreciate 0 Tweet Quote

09-08-2015, 01:04 PM	#2
JEllis Major General 686 Rep 5,521 Posts Drives: E36 M3, E92 M3 Join Date: Oct 2006 Location: Orlando iTrader: (4)	www.realoem.com is a great tool http://www.realoem.com/bmw/enUS/show...diagId=11_4129 __________________ Instagram: jellismotorwerks
	Appreciate 0 Quote

09-08-2015, 01:26 PM	#6
JEllis Major General 686 Rep 5,521 Posts Drives: E36 M3, E92 M3 Join Date: Oct 2006 Location: Orlando iTrader: (4)	The one time use clamps are #6 - 11617838284 __________________ Instagram: jellismotorwerks
	Appreciate 0 Quote

09-08-2015, 01:50 PM	#7
Leonardo629 Lieutenant Colonel 177 Rep 1,788 Posts Drives: 2013 M3 Coupe Join Date: Sep 2006 Location: Taiwan iTrader: (10)	I see three part#s for the clamps, which do you use if you ever need to remove the plenum to get to say...throttle actuators and stuff?
	Appreciate 0 Quote

09-08-2015, 02:00 PM	#8
JEllis Major General 686 Rep 5,521 Posts Drives: E36 M3, E92 M3 Join Date: Oct 2006 Location: Orlando iTrader: (4)	If your removing the intake manifold you only have to loosen the eight standard hose clamps and then lift. The rubber boots will stay attached to the TBs via the one time use clamps. __________________ Instagram: jellismotorwerks
	Appreciate 0 Quote

09-08-2015, 02:40 PM	#9
Leonardo629 Lieutenant Colonel 177 Rep 1,788 Posts Drives: 2013 M3 Coupe Join Date: Sep 2006 Location: Taiwan iTrader: (10)	thanks!
	Appreciate 0 Quote

09-09-2015, 10:10 AM	#11
8600RPM Lieutenant Colonel 688 Rep 1,749 Posts Drives: e92 m3 Join Date: Oct 2014 Location: AZ iTrader: (0)	You can't afford a 7 dollar part?
	Appreciate 0 Quote

09-09-2015, 09:13 PM	#15
pbonsalb Lieutenant General 7679 Rep 13,759 Posts Drives: 18 F90 M5, 99 E36 M3 Turbo Join Date: Feb 2011 Location: New England iTrader: (4)	How are you ruining 8 clamps removing the manifold? If you are, you should not be working on the car. No need to replace TB clamps except the lower ones and you have no need to remove those.
	Appreciate 0 Quote