ANYONE USE Adjustable Front Sway Bar End Link WITH KW CS

Sebringjetta · 11-13-2014, 02:23 PM

anyone use Adjustable Front Sway Bar End Links with their KW CS? i am posting this in the track section as people who corner balance their cars will most likely switch to Adjustable endlinks.

i am trying to figure out what length people used with their KW CS kit. thank you in advance

italyix · 11-13-2014, 02:28 PM

Quote:

Originally Posted by Sebringjetta

anyone use Adjustable Front Sway Bar End Links with their KW CS? i am posting this in the track section as people who corner balance their cars will most likely switch to Adjustable endlinks.

i am trying to figure out what length people used with their KW CS kit. thank you in advance

I have the Bimmerworld adjustable sway bar links, but I dont run KW CS but Nitron 3-ways.

The links were required as the stock units were too long.

Sebringjetta · 11-13-2014, 02:30 PM

Quote:

Originally Posted by italyix

I have the Bimmerworld adjustable sway bar links, but I dont run KW CS but Nitron 3-ways.

The links were required as the stock units were too long.

ya the KW links are shorter.. im going to order the BW links... but just need to figure out what length... im going to measure mine tomorrow if no one knows off hand.. was being lazy and trying to save some time

driftflo · 11-13-2014, 03:21 PM

i measured the oe kw links and took this as a basis for the adjustable ones. as these are adjustable, you have some space left on both sides.

mine look like this

Malek@MRF · 11-13-2014, 03:44 PM

I use adjustable links.

Sebringjetta · 11-13-2014, 03:44 PM

Quote:

Originally Posted by driftflo

i measured the oe kw links and took this as a basis for the adjustable ones. as these are adjustable, you have some space left on both sides.

mine look like this

thank you sir!!!!!

Sebringjetta · 11-13-2014, 03:45 PM

Quote:

Originally Posted by Malek@MRF

I use adjustable links.

what susp are you running?

Malek@MRF · 11-13-2014, 03:46 PM

KW Clubsport, as you inquired about.

Sebringjetta · 11-13-2014, 03:54 PM

Quote:

Originally Posted by Malek@MRF

KW Clubsport, as you inquired about.

got it sorry

do you recall the length of the endlinks you used and what brand? thank you for your time

Malek@MRF · 11-13-2014, 03:57 PM

Quote:

Originally Posted by Sebringjetta

got it sorry

do you recall the length of the endlinks you used and what brand? thank you for your time

Approximately 1.0 inch shorter than the KW CS links that come with the KW coilovers.

Sebringjetta · 11-13-2014, 04:10 PM

Quote:

Originally Posted by Malek@MRF

Approximately 1.0 inch shorter than the KW CS links that come with the KW coilovers.

got it thank you sir!!!!

RickyBobby · 11-13-2014, 04:32 PM

I use turner motorsports adjustable end links because they're sealed and maintenance free. I've used rod end style and always hated the squeaking / creaking noises.
Mine are still nice any tight after 3 years.

Sebringjetta · 11-13-2014, 04:38 PM

Quote:

Originally Posted by RickyBobby

I use turner motorsports adjustable end links because they're sealed and maintenance free. I've used rod end style and always hated the squeaking / creaking noises.
Mine are still nice any tight after 3 years.

ill have to look into the difference between BW and the turner.. not sure if the BW are sealed or not

Cidle · 11-13-2014, 10:12 PM

^ +1 buy the sealed units! I need to replace my non-sealed units, less than 3 years!

11-13-2014, 02:23 PM	#1
Sebringjetta Brigadier General 430 Rep 3,728 Posts Drives: E46m3 Join Date: Mar 2011 Location: Sacramento iTrader: (39)	ANYONE USE Adjustable Front Sway Bar End Link WITH KW CS anyone use Adjustable Front Sway Bar End Links with their KW CS? i am posting this in the track section as people who corner balance their cars will most likely switch to Adjustable endlinks. i am trying to figure out what length people used with their KW CS kit. thank you in advance __________________
	Appreciate 0 Tweet Quote

11-13-2014, 03:21 PM	#4
driftflo Second Lieutenant 543 Rep 299 Posts Drives: M3T G81, M2 F87, M3 E92, 911 G Join Date: May 2012 Location: Europe iTrader: (0) Garage List 2025 BMW M3 G81 [9.50] 2018 BMW M2 F87 [0.00] 2012 BMW M3 E92 [0.00]	i measured the oe kw links and took this as a basis for the adjustable ones. as these are adjustable, you have some space left on both sides. mine look like this
	Appreciate 0 Quote

11-13-2014, 03:44 PM	#5
Malek@MRF Brigadier General 789 Rep 3,732 Posts Drives: E92 M3, E46 M3, G82 M4 Join Date: Jan 2008 Location: Irvine, California iTrader: (5)	I use adjustable links. __________________ BMW PERFORMANCE SPECIALISTS. Race Engines. Suspension. F/I. Brakes. Race Preparation. Factory Service. Alignments. OFFICIAL PARTNERS: KW. MOTON. Brembo. AP Racing. BBS Motorsport. iND. HRE. Turner Motorsport. VAC. BMW Motorsport. Facebook \| Instagram \| Yelp! \| Flikr Phone: 949-233-0448 \| E-Mail: info@mrfengineering.com
	Appreciate 0 Quote

11-13-2014, 03:46 PM	#8
Malek@MRF Brigadier General 789 Rep 3,732 Posts Drives: E92 M3, E46 M3, G82 M4 Join Date: Jan 2008 Location: Irvine, California iTrader: (5)	KW Clubsport, as you inquired about. __________________ BMW PERFORMANCE SPECIALISTS. Race Engines. Suspension. F/I. Brakes. Race Preparation. Factory Service. Alignments. OFFICIAL PARTNERS: KW. MOTON. Brembo. AP Racing. BBS Motorsport. iND. HRE. Turner Motorsport. VAC. BMW Motorsport. Facebook \| Instagram \| Yelp! \| Flikr Phone: 949-233-0448 \| E-Mail: info@mrfengineering.com
	Appreciate 0 Quote

11-13-2014, 04:32 PM	#12
RickyBobby Captain 113 Rep 697 Posts Drives: M3 Join Date: Mar 2008 Location: NorCal iTrader: (3)	I use turner motorsports adjustable end links because they're sealed and maintenance free. I've used rod end style and always hated the squeaking / creaking noises. Mine are still nice any tight after 3 years.
	Appreciate 1 gmx172.00 Quote

11-13-2014, 10:12 PM	#14
Cidle First Lieutenant 50 Rep 366 Posts Drives: 2008 M3 Join Date: Apr 2011 Location: Vancouver, BC iTrader: (2)	^ +1 buy the sealed units! I need to replace my non-sealed units, less than 3 years!
	Appreciate 0 Quote