|
I believe I would qualify for the residence cam expert (which is pretty sad) and still not at all understood after just going through this process it certainly is not that difficult. Costly a bit but doable. Anyway I am not sure if you are asking about stock or aftermarket cam but nonetheless the procedure is the same.
I am not technical enough to do the job myself but I know my installer bought the typical s65 timing tool easily found online. Anywhere from 500 to 1k and you don't need any fancy electronics. Mine was all timed with that and it worked out perfectly. I ended up having some other work done unrelated by another shop afterwards and they had the fancy bmw tools which they double checked the timing via that and it was spot on.
So if you are a DIY person youll need to just look online and get the tool and go from there
__________________
2013 DCT ZCP Silverstone w/Silver/Novillo -Ohlins TTX 46/36 True Coilover 570F/450R-Delrin Subframe Bushings, Dinan Toe arm and Front Monoball, ECS RTA-Evolve Catless Xpipe, Schrick Cams 284/284 12mm Lift, BMC Filter, MS Pulley, EPIC 100 octane cam tune. PFC Front and Rear BBK, 19in Signature (9 and 10)-PSC2(275/255-35).BMW black chrome griles, gils, exhaust tips, M spoiler and M steering wheel, CSF Radiator/Oil Cooler
|