Front Lip With Good Fitment (GTS STYLE)

Looking for a GTS style lip with good fitment. If anyone has recommendations I'd appreciate it.

Alpha N, 360Carbon, Ridgeline Motorsports.

nycplumber wrote

Looking for a GTS style lip with good fitment. If anyone has recommendations I'd appreciate it.

+1 for Ridgeline motorsports, no lip is ever going to be perfect at a good cost but my RM gt4 v2 I'd say is 99% and is super sturdy, way way way more sturdy than my gts1 lip from Pom Performance. Has lasted over a year and has no issues, road trip to FL, tons of scraping and has lasted so long that the clear coat on the top is slightly chipping (my ocd) is the issue vs the lip having any issues coming off or fitment

I recently installed the ridgeline gts with chassis mounted splitter. Fitment was good, my prior 12 year old RKP had a bit better fitment, but has long since been available, and back when it was, it was twice the cost of the RL and only the upper half.
I'm very DIY savvy, with a touch of OCD and can generally engineer a solution to install issues that may arise.
The RL lip was easy, the only downside is it would have been nice to have a template for what needs to be trimmed on the bumper to fit the chassis mounts. I had to mark, trim, then test fit until I got it right. Overall it's very sturdy. I've run it on track up to 140 mph.

powerbait wrote

I recently installed the ridgeline gts with chassis mounted splitter. Fitment was good, my prior 12 year old RKP had a bit better fitment, but has long since been available, and back when it was, it was twice the cost of the RL and only the upper half.
I'm very DIY savvy, with a touch of OCD and can generally engineer a solution to install issues that may arise.
The RL lip was easy, the only downside is it would have been nice to have a template for what needs to be trimmed on the bumper to fit the chassis mounts. I had to mark, trim, then test fit until I got it right. Overall it's very sturdy. I've run it on track up to 140 mph.

Does this come with hardware for the upper lip as well? Or does anyone know what hardware you need for the upper portion of the GTS lip.

fengrr wrote

Does this come with hardware for the upper lip as well? Or does anyone know what hardware you need for the upper portion of the GTS lip.

Yes, the Ridgeline Motorsport GTS lip comes with hardware for the upper part of the lip. The upper part of the GTS lip attaches to the bumper with self tapping screws and double-sided tape.

Check out the Thic Whips video, it does a pretty good job showing what is involved:

I didn't use double stick tape since the upper is not perfectly flush in areas. The unstuck tape would collect pebbles and trash (previous experience). Since the lower chassis mounted splitter is there, it effectively sandwiches the upper lip to the bumper. It is much easier to remove debris collected in the split and you don't see the unstuck or pulled away tape.

We carry the Ridgeline units, great fitment and relatively easy to install.