Hi,
I was hoping to get some guidance on tracking down an oil leak on my son's 2006 330XI. I put a fair amount of effort into chasing it down before I posted but I'm hitting a dead end. The oil is pooling on the drivers side right around the power steering rack banjo connections. There's a decent amount leaking and it's definitely motor oil and not power steering fluid. I determined this by look/smell and also with dye and a UV light. Here's the common areas I checked and in some cases previously addressed:
1 - Oil filter housing gasket - I originally thought this may be the issue as it was seeping a bit of oil. I replaced it a few weeks ago and although it is no longer leaking, it didn't fix my larger problem. I also checked the housing cap and O-ring.
2 - VANOS solenoids - No leaks around them.
3 - CAM Positions Sensors - Both were replaced recently and no leaks around them.
4 - Valve cover gasket - Replaced 2 years ago and I looked with a boroscope
and with the UV light and don't see any leaks.
5 - Oil fill cap - No leaks
6 - Oil pan gasket - Looked with the boroscope around the oil pan and with the UV light and don't see any leaks. I also checked the sensor.
7 - Check/Non-Return Valves - Replaced these several months ago as the O-rings went bad and were dripping oil. I checked and no issues there.
8 - Timing chain tensioner crush ring - Previously replaced, no current issues.
9 - Front crankshaft seal - Checked with the boroscope and with the UV dye. I'm not 100% sure it's not leaking but I checked as best as I could with the pulley still on.
Anything obvious I should check for that I didn't list? Commonsense would tell me that the leak is on the drivers side lower engine since that is where the oil is pooling and doesn't appear to be coming from the top of the engine. Unfortunately the subframe is blocking full access, so it's tough to dig much further in that area I know the leaks on these engines can be deceiving since it is tilted.
I appreciate any guidance!
Thanks,
Ron
I was hoping to get some guidance on tracking down an oil leak on my son's 2006 330XI. I put a fair amount of effort into chasing it down before I posted but I'm hitting a dead end. The oil is pooling on the drivers side right around the power steering rack banjo connections. There's a decent amount leaking and it's definitely motor oil and not power steering fluid. I determined this by look/smell and also with dye and a UV light. Here's the common areas I checked and in some cases previously addressed:
1 - Oil filter housing gasket - I originally thought this may be the issue as it was seeping a bit of oil. I replaced it a few weeks ago and although it is no longer leaking, it didn't fix my larger problem. I also checked the housing cap and O-ring.
2 - VANOS solenoids - No leaks around them.
3 - CAM Positions Sensors - Both were replaced recently and no leaks around them.
4 - Valve cover gasket - Replaced 2 years ago and I looked with a boroscope
and with the UV light and don't see any leaks.
5 - Oil fill cap - No leaks
6 - Oil pan gasket - Looked with the boroscope around the oil pan and with the UV light and don't see any leaks. I also checked the sensor.
7 - Check/Non-Return Valves - Replaced these several months ago as the O-rings went bad and were dripping oil. I checked and no issues there.
8 - Timing chain tensioner crush ring - Previously replaced, no current issues.
9 - Front crankshaft seal - Checked with the boroscope and with the UV dye. I'm not 100% sure it's not leaking but I checked as best as I could with the pulley still on.
Anything obvious I should check for that I didn't list? Commonsense would tell me that the leak is on the drivers side lower engine since that is where the oil is pooling and doesn't appear to be coming from the top of the engine. Unfortunately the subframe is blocking full access, so it's tough to dig much further in that area I know the leaks on these engines can be deceiving since it is tilted.
I appreciate any guidance!
Thanks,
Ron