wyatth wroteSorry for my ignorance, but would you give me a link to it?It does, yeah. I posted a longer writeup in my journal over in the Photo Gallery subforum.
7.3MVIEWS
24KREPLIES
39KAPPRECIATES
17 hr agoLAST POST
It's not supposed to look like this
Ran over something on the freeway and busted up the plastic shielding under the front end
Time for a metal skid plate
Ran over something on the freeway and busted up the plastic shielding under the front end
Time for a metal skid plate
Hit a pothole on the way to KTown last night, right by Beverly Hills BMW. Left the car in their lot overnight, went back this morning, dealer put on a new PSS.
Did some backroads hunting today with some friends
Coming out of an apex at 6,000 and hearing her scream to 8,500… truly an experience.
The 997 GT3 remains my attainable dream car
The F8 is just mindbending
Coming out of an apex at 6,000 and hearing her scream to 8,500… truly an experience.
The 997 GT3 remains my attainable dream car
The F8 is just mindbending
CamasM3e93 wroteGetting back up to my house today was a major PITA, even in a Cayenne (though on AS4s). All the roads in were ice sheets, slid right back down on my first attempt. Had to come back after doing a grocery run, lock all diffs, find a line and get a good run up. And the big road next to my house looked worse than it did yesterday.Retrieved my car from its snowy tomb after having to abandon it at a nearby business two days ago, with our metro area getting as much as 11" of snow on a forecast of max 1".
Learned a couple key things this week:
Conti all season tires - perfectly fine in light snow and ice along with careful driving, but fairly worthless if you add much of an incline and need to come off from a stop. I live on a hill and a snowstorm caught everyone by surprise, mine joining 5-6 other cars at the base of the hill trying to sort out next steps.
Traction socks - wasn't able to evaluate because I could not get them onto the tires due to the low tire clearance to the wheel well. I may be able to use a flexible rod to slide them over the tires and will give that a go in the comfort of my garage.
Daily driving an M3 takes some planning!
Pictured is me parked later in the day….500 WHP snowy house calls, come snow or rain
Knocked out a lot today on the M3. Replaced the pinion seal on the diff and changed fluid. Then installed my spare rear subframe that I had already prepped with solid mounts, and akg diff bushings, etc. Hotchkis rear sway went in at the same time as well as the V2 Carbon driveshaft.
jvictormp wroteNo problem - https://www.m3post.com/forums/showpost.php?p=29834357&postcount=176Sorry for my ignorance, but would you give me a link to it?
Cmassey3 wroteMy God they are stunning!The street going version of the BBS E88, the RT88 is starting to go out:
https://frontstreet.media/2016/03/23/tech-overview-bbs-rt-wheels-close-the-gap-between-road-and-track/
These are gonna be mega bucks, $1,495.00 per wheel. but probably worth it for one of the best looking wheels on the E92.
Gave her a bath
And now a oil change
Last stop for the day, topping it off for the up coming week,
Met up with some fellow Houston e9x owners
VR1 wroteWhat part of Houston? I’m in Friendswood, maybe if there’s a fourth spot next to y’all’s M3’s I can park mine there next timeMet up with some fellow Houston e9x owners
Need to quickly figure out which metal skid plate to order
edit - ordered the MLT engineering one
https://mltengineering-design.com/products/skid-plate-front-belly-pan-cover-kit-for-bmw-e9x-m3?variant=39720515076282
edit - ordered the MLT engineering one
https://mltengineering-design.com/products/skid-plate-front-belly-pan-cover-kit-for-bmw-e9x-m3?variant=39720515076282
Big couple of weeks. All my black friday goodies arrived.
2 weeks ago the Nitron R1 coilovers. Only driven the car a few times since but so far they’re amazing.
Last week installed the Recaro pole positions.
Also picked up a pair of used seats off an e92 3 series. Currently in the process of harvesting the heat mats and OC3 sensor out of it and gonna transfer it over to the pole position. This will allow me to retain seat heating and the oem heat buttons, as well as retain occupancy sensor instead of coding it out.
Wired everything up yesterday loosely and it worked just as planned. Now I gotta tuck heat mats under the pole position cushions.
2 weeks ago the Nitron R1 coilovers. Only driven the car a few times since but so far they’re amazing.
Last week installed the Recaro pole positions.
Also picked up a pair of used seats off an e92 3 series. Currently in the process of harvesting the heat mats and OC3 sensor out of it and gonna transfer it over to the pole position. This will allow me to retain seat heating and the oem heat buttons, as well as retain occupancy sensor instead of coding it out.
Wired everything up yesterday loosely and it worked just as planned. Now I gotta tuck heat mats under the pole position cushions.
XKxRome0ox wroteGorilla tape should fix thatNeed to quickly figure out which metal skid plate to order
edit - ordered the MLT engineering one
https://mltengineering-design.com/products/skid-plate-front-belly-pan-cover-kit-for-bmw-e9x-m3?variant=39720515076282
The dreaded throttle actuators…periodic limp mode @ 48k miles on a 2011 E90 Comp. Another Euro Power Motorsports customer. Swapped the plugs while in there since they were last done in 2016 and about 20k miles ago. Just need to seat that finicky plenum, and I’ll be set.
VR1 wroteHow much did the wrap cost?Can not stop driving this thing. The color change made me fall in love with her 100x more
NVD Autosport carbon console with BlackFlag USA shift cover.
Conzyo wroteThat’s sweet, any more details?NVD Autosport carbon console with BlackFlag USA shift cover.
BP709 wroteDo you have a link to the products you used? Seats and mounts..... I have a SSII E90 with the Palladium silver interior and this is the exact look I'm going for!Completed my recaro install over the weekend!
Vedubin01 wroteWill be using the rtd shifter with this setup.That’s sweet, any more details?
