Slon-workshop: 6 piston Brembo custom brake kits (OEM 360/380mm rotor setup).

^I want those!!!

shimmy23 wrote

^I want those!!!

take them!

Hi, can you tell me what the brake bias shift is when using the following:

Brembo 6 pot fronts 190mm pads
Brembo 4 pot rear 50mm pads

Also what pads exactly do the rear brembos use?

Thanks

T1M wrote

Hi, can you tell me what the brake bias shift is when using the following:

Brembo 6 pot fronts 190mm pads
Brembo 4 pot rear 50mm pads

Also what pads exactly do the rear brembos use?

Thanks

you are mixed up pads length with pads height .
we have 2 options of 50mm height rear pads, 110 and 132mm length. only pads height affects on brake bias.

anyway, i'll calculate and post later .

PM'd!

slonik wrote

you are mixed up pads length with pads height .
we have 2 options of 50mm height rear pads, 110 and 132mm length. only pads height affects on brake bias.

anyway, i'll calculate and post later .

Did you manage to get this calculated?

T1M wrote

Did you manage to get this calculated?

sorry mate!

Oem setup brake balance is 65% on the front.
With our 6 piston brembo setup on oem rotor, you'll get 66.5% on the front.
With our 6 piston brembo setup on f8x 380mm rotor you'll get 71% on the front.
So, with increased stopping power and deceleration it works really good.

our front 6 piston brembo + oem rotor (360mm), rear small 4 piston brembo with 52mm pad height on oem rotor (350mm) 65.5% on the front

our front 6 piston brembo + oem rotor (360mm), rear large 4 piston brembo with 62mm pad height on oem rotor (350mm) 64.1% on the front

our front 6 piston brembo + f8x rotor (380mm), rear small 4 piston brembo with 52mm pad height on oem rotor (350mm) 68.4% on the front

our front 6 piston brembo + f8x rotor (380mm), rear large 4 piston brembo with 52mm pad height on oem rotor (350mm) 65.5% on the front

our front 6 piston brembo + f8x rotor (380mm), rear large 4 piston brembo with 62mm pad height on oem rotor (350mm) 67.1% on the front



our full kit with 2 piece rotors
380mm 6p (60mm pads) + 355mm large 4p (50mm pads) 65.3% on the front

I want to get a front and rear kit I can use with my stock E90 M3 rotors. Is that possible? What price am I looking at? Thanks!

IanMan wrote

I want to get a front and rear kit I can use with my stock E90 M3 rotors. Is that possible? What price am I looking at? Thanks!

Did you even read this thread?

shimmy23 wrote

Did you even read this thread?

i think most people don't need all this technical info, and i only need to make a thread with some pics and one line message with price.

for people, who like pics and don't like reading.

new calipers from the box
(can fitted only few models which goes with this calipers from factory).


intermediate result on our CNC milling center.
large surface was cutted, so after all work done calipers go to sandblasting and respraying).




final result



ps specially for very clever people, who think "why i need to buy this calipers from russian guys, if i can buy them myself and ask only brackets"

^ awesome! i want these, but is there a way to verify if they'll clear my wheels?

shimmy23 wrote

^ awesome! i want these, but is there a way to verify if they'll clear my wheels?

in most cases our kit in e9x e8x platform has no issues with clearance in wheels.
in which wheels you need to fit them?

slonik wrote

in most cases our kit in e9x e8x platform has no issues with clearance in wheels.
in which wheels you need to fit them?

BBS rsii, 714 faces

shimmy23 wrote

BBS rsii, 714 faces

hmm, can you measure or take a pic like this?


you need to check distance between rotor surface (inner diameter) and wheel spokes.

Could I get a rough estimate on how much front and rear callipers would cost with M4 rotors to fit the E92 M3 Coupe?

I don't need to change the brakes just yet, but want to start budgeting.

Thanks.

The-Traveler wrote

Could I get a rough estimate on how much front and rear callipers would cost with M4 rotors to fit the E92 M3 Coupe?

I don't need to change the brakes just yet, but want to start budgeting.

Thanks.

1900+1700$
(with large rear 4 pot caliper).

i can also sell m4 rotors, and they are cheap enough here in russia, but shipping cost will eat all this economy.

slonik wrote

1900+1700$
(with large rear 4 pot caliper).

i can also sell m4 rotors, and they are cheap enough here in russia, but shipping cost will eat all this economy.

Thanks I’ll be in touch when the time comes.

Is powder coating an option you can offer?

r0cketm0nkey wrote

Is powder coating an option you can offer?

which color do you want?

Red, but kind of juggling the M blue as well.