Brembo 4 pot big brake kit (360mm) - Front [Freaky Parts]

Looks like an interesting product placement; between OE & high end BBK prices.

Anyone have intel or experience with this offering, seller?

I've no experience with this kit nor the seller, but dang.. that's a helluva' decent price point IMO. ~$1000 with pads.
.

DrFerry wrote

I've no experience with this kit nor the seller, but dang.. that's a helluva' decent price point IMO. ~$1000 with pads.
.

Fully agree, price point is very attractive.
Also a rear kit possibility...
From 'Freaky Parts' FAQ:

Interesting! Thanks for sharing

They also have an AP kit that's affordable ($1,600).

It's technically for an E46 M3 but they include adapters for E9x... It's pretty old but there's still pads available for it - someone should guinea pig it.

several people are running the FP brembo 4pot kit. its been around for a while. I believe a few people jumped on the AP kit as well, but i haven't seen any reviews on them.

maybe folks with chime in that have this kit, again, its not a new offering to the market.

These are very tempting especially for the price point. I hope they make a matching rear kit in the near future

I have been running the front kit for 3.5 years now, prior owner installed before I bought the car. No real complaints for street driving and some light canyon work, I swapped the pads to Akebono Ceramics and never have to clean my wheels. I doubt there’s any performance upgrade over OEM but at the price point that shouldn’t be expected, they’re for curb appeal and they fit the bill nicely for that.

I tried to get them to make a rear kit like 3 years ago, emailing them that I was ready to be the Guinea pig, etc. no dice. Ended up just painting the stock rears red to match the fronts.

Deebo wrote

I have been running the front kit for 3.5 years now, prior owner installed before I bought the car. No real complaints for street driving and some light canyon work, I swapped the pads to Akebono Ceramics and never have to clean my wheels. I doubt there’s any performance upgrade over OEM but at the price point that shouldn’t be expected, they’re for curb appeal and they fit the bill nicely for that.

Curious:
Any pics?
Any driving experience w/OE fronts as a comparison?
Seems the FP set should be equal or slight improvement...thoughts?

I tried to get them to make a rear kit like 3 years ago, emailing them that I was ready to be the Guinea pig, etc. no dice. Ended up just painting the stock rears red to match the fronts.

I may email to inquire if rears are a possibility. No extra charge to ask, right?

Anyone else have interest in a full set if Freaky Parts offers? With maybe ~5 serious buyers they'll entertain a GB...

shimmy23 wrote

several people are running the FP brembo 4pot kit. its been around for a while. I believe a few people jumped on the AP kit as well, but i haven't seen any reviews on them.

maybe folks with chime in that have this kit, again, its not a new offering to the market.

Interesting...poking around on-line, never seen these previously, especially as a kit offered.
Any known sellers in US?

For all the hassle and costs to source, convert, upgrade to F80 brakes, seems like a reasonable alternative for non-track guys...jus sayin

smokinjoe64 wrote

shimmy23 wrote

several people are running the FP brembo 4pot kit. its been around for a while. I believe a few people jumped on the AP kit as well, but i haven't seen any reviews on them.

maybe folks with chime in that have this kit, again, its not a new offering to the market.

Interesting...poking around on-line, never seen these previously, especially as a kit offered.
Any known sellers in US?

not that i'm aware of but i've bought from FP and they had great service

smokinjoe64 wrote

Anyone else have interest in a full set if Freaky Parts offers? With maybe ~5 serious buyers they'll entertain a GB...

Depending on price, I may be interested

DjMarkOne wrote

Depending on price, I may be interested

Roger that...emailed FP to determine if rears now offered and a quote for a full kit.

...we shall see

Do I smell a group buy germinating?

SnohoRaptor wrote

Do I smell a group buy germinating?

who knows, could be?!?...

+1 on group buy

Deebo wrote

I have been running the front kit for 3.5 years now, prior owner installed before I bought the car. No real complaints for street driving and some light canyon work, I swapped the pads to Akebono Ceramics and never have to clean my wheels. I doubt there’s any performance upgrade over OEM but at the price point that shouldn’t be expected, they’re for curb appeal and they fit the bill nicely for that.

I tried to get them to make a rear kit like 3 years ago, emailing them that I was ready to be the Guinea pig, etc. no dice. Ended up just painting the stock rears red to match the fronts.

How is the pad sweep?

EMKOOP wrote

How is the pad sweep?

Good question...

Better yet, let's compile relevant questions for the FP brake kit(s); front & rear.
I'll facilitate forwarding to FP, then provide/post feedback.

Let's keep in mind product 'scope' & expectations [as I understand it]:

• Equal to, slight improvement to OE Performance
• Not a track solution
• Aesthetic update
• Pricing, availability for F&R combo kit
• ?

So, have at it...
Questions/Request List

1. Rotor/Pad sweep
2. OE ABS & brake wear sensors/lines - Caliper compatibility; fitment/provisions to mount
3. Warranty - Duration; who supports? [i.e. Brembo or FP]
4. Brembo - Caliper model number; specs
5. Dust shield - OE fitment w/calipers
6. e92 M3 pic examples
7. ...what else Gents?

Latest email feedback from FP



Damn, a show stopper for me...no desire for mis-matched brake sets

smokinjoe64 wrote

Latest email feedback from FP

From: Sales at FreakyParts <sales@freakyparts.co.uk>
Date: Saturday, April 30,2022 at 23:45
To: xxx
Subject: Re: BMW E9x M3 Brembo 4 pot big brake kit

Hi.

We don't have a matching rear kit as we don't have a source for new calipers. We can supply adaptors for the Alfa Romeo rear 4 pots.
Shipping on the kit can be added here:
https://freakyparts.co.uk/products/shipping-to-usa-20kg?_pos=3&_sid=197c263e3&_ss=r

Thanks
Stewart
FreakyParts

Damn, a show stopper for me...no desire for mis-matched brake sets

the alfa rears are also brembo. that being said i did not like the alfa rear pad sweep so i opted for the alfa 6pot front only. probably not gonna get around to even installing the fronts so selling the kit now if anyone is interested.

i woulda rather paid the little extra for a 6pot vs a 4pot

smokinjoe64 wrote

EMKOOP wrote

How is the pad sweep?

Good question...

Better yet, let's compile relevant questions for the FP brake kit(s); front & rear.
I'll facilitate forwarding to FP, then provide/post feedback.

Let's keep in mind product 'scope' & expectations [as I understand it]:

• Equal to, slight improvement to OE Performance
• Not a track solution
• Aesthetic update
• Pricing, availability for F&R combo kit
• ?

So, have at it...
Questions/Request List

1. Rotor/Pad sweep
2. OE ABS & brake wear sensors/lines - Caliper compatibility; fitment/provisions to mount
3. Warranty - Duration; who supports? [i.e. Brembo or FP]
4. Brembo - Caliper model number; specs
5. Dust shield - OE fitment w/calipers
6. e92 M3 pic examples
7. ...what else Gents?

Do the four caliper pistons require a higher brake fluid volume to displace them compared to the single piston OEM caliper? In other words will the master cylinder and brake pedal require a longer travel to operate compared to OEM, or are their kit calipers 'matched' to the E9X M3 master cylinder?

smokinjoe64 wrote

Damn, a show stopper for me...no desire for mis-matched brake sets

blah, that sucks. this is another option that's floating around: https://www.m3post.com/forums/showpost.php?p=28842740&postcount=313

not sure about pad sweep tho, but hopefully someone can chime in on this part