Suspension Changes and Headlight Aiming Problems

G0FNDM3 · 02-02-2015, 01:05 PM

Great post. Will check mine today!

G0FNDM3 · 02-10-2015, 10:20 AM

fixed!! I love this post!!

Murph335 · 05-27-2015, 09:32 AM

Mine looks very different. Headlights are too low after the coilover install.

SPEEDBUMP · 07-27-2015, 09:38 PM

old thread but this worked for me, was really worried it was something more serious!

Thanks OP

Move Over · 03-15-2016, 11:59 PM

Old thread, but this was the fix for my headlights. Swapped out springs this weekend and i reinstalled the sensor reversed. Have done it 6-8 times now, just must have missed it this time around.

Thank you!

doubleu8 · 04-03-2016, 03:03 PM

Another thank you for this thread.
Fixed in 10 minutes.

tomfraser · 03-11-2017, 04:17 PM

Same here - had my Eibach Pro Kit installed, and beams were right up - sure enough rear arm was wrong, fixed without jacking up car or removing wheel with a 10mm socket, and 10mm spanner to stop the bolt from spinning.

Matthewricha · 12-18-2017, 12:53 PM

Hi had Eibach springs and Koni FSD shocks installed about 2 years ago on my E92 335i, and I remember having to manually adjust the headlights down after the install. Ever since I have found that the high beam doesn't go as high as it used to. After reading this thread I thought perhaps my sensors were also not quite right. But looking at them, they seem fine! Perhaps the raked stance the Eibach springs have given the car need manual adjustment after all.

Front:

Rear:

Realoem:

///Mobbin · 01-16-2018, 12:18 PM

So easy to re-attach these arms the wrong way at the end of a suspension install, another car fixed thanks to this thread!

NeverL8 · 12-03-2019, 12:14 PM

Bumping the old thread,

anyone fixed their headlights that were pointing too low? I raised mine up with the screw...need it higher but too afraid to over thread the screw and damage something. Any help will be appreciated

nolaman1970 · 01-11-2020, 10:00 PM

Thank you, installed eibach springs today and put the rear sensor on wrong. Found this blessing of a thread. 😁

MPower7 · 06-01-2020, 02:04 PM

Fixed my yesterday. Thank you! So much better now.

Redd · 01-15-2021, 12:12 AM

I just fixed my rear headlight leveling sensor too. The pics are a bit hard to see, so to simplify it:

Sensor arm facing inboard (away from spring) = Wrong, headlight aim will be too high

Sensor arm facing outboard (toward spring) = Correct

--Aramis-- · 08-25-2024, 04:40 PM

Big Thanks!

After suspension install, low beams were too high, i had reinstalled the rear sensor the wrong way

Easy fix but it needs to know it

02-02-2015, 01:05 PM	#67
G0FNDM3 Brigadier General 761 Rep 4,437 Posts Drives: E90 M3 AW Join Date: Aug 2010 Location: FT. Bragg, NC. iTrader: (28) Garage List 2007 335i [9.00]	Great post. Will check mine today! __________________ ModeCarbon V1 CF lip/PF AG CF SS ext./ARKYM CF Diffuser/OSS AE's/B&G Springs/CF Performance Spoiler/V2 Led Performance SW/Meisterschaft GT exhaust
	Appreciate 0 Quote

02-10-2015, 10:20 AM	#68
G0FNDM3 Brigadier General 761 Rep 4,437 Posts Drives: E90 M3 AW Join Date: Aug 2010 Location: FT. Bragg, NC. iTrader: (28) Garage List 2007 335i [9.00]	fixed!! I love this post!! __________________ ModeCarbon V1 CF lip/PF AG CF SS ext./ARKYM CF Diffuser/OSS AE's/B&G Springs/CF Performance Spoiler/V2 Led Performance SW/Meisterschaft GT exhaust
	Appreciate 0 Quote

05-27-2015, 09:32 AM	#69
Murph335 Major 145 Rep 1,423 Posts Drives: '07 N54 e90, '10 N54 e93, TBSS Join Date: Feb 2010 Location: Gilbert, AZ iTrader: (12) Garage List 2015 Tesla P85D [0.00]	Mine looks very different. Headlights are too low after the coilover install. Last edited by Murph335; 05-27-2015 at 09:40 AM..
	Appreciate 0 Quote

07-27-2015, 09:38 PM	#70
SPEEDBUMP Track Junkie 15 Rep 123 Posts Drives: 2008 E92 M3 (AW/FR EXT) Join Date: Jun 2012 Location: Ottawa, ON (CANADA) iTrader: (6)	old thread but this worked for me, was really worried it was something more serious! Thanks OP
	Appreciate 0 Quote

03-15-2016, 11:59 PM	#71
Move Over Colonel 1270 Rep 2,490 Posts Drives: M3 6MT Join Date: May 2015 Location: Peninsula iTrader: (9)	Old thread, but this was the fix for my headlights. Swapped out springs this weekend and i reinstalled the sensor reversed. Have done it 6-8 times now, just must have missed it this time around. Thank you! __________________ 2010 E92 M3 DCT
	Appreciate 0 Quote

04-03-2016, 03:03 PM	#72
doubleu8 Private First Class 19 Rep 171 Posts Drives: e90 Join Date: Jan 2014 Location: Motor City iTrader: (1)	Another thank you for this thread. Fixed in 10 minutes.
	Appreciate 0 Quote

03-11-2017, 04:17 PM	#73
tomfraser Private 109 Rep 93 Posts Drives: 2014 Mineral Grey F80 M3 Join Date: Jun 2016 Location: Auckland iTrader: (0)	Same here - had my Eibach Pro Kit installed, and beams were right up - sure enough rear arm was wrong, fixed without jacking up car or removing wheel with a 10mm socket, and 10mm spanner to stop the bolt from spinning.
	Appreciate 1 CSBM52866.50 Quote

12-18-2017, 12:53 PM	#74
Matthewricha Private First Class 78 Rep 158 Posts Drives: M235i Join Date: Dec 2013 Location: Hampshire iTrader: (0)	E92 335i Hi had Eibach springs and Koni FSD shocks installed about 2 years ago on my E92 335i, and I remember having to manually adjust the headlights down after the install. Ever since I have found that the high beam doesn't go as high as it used to. After reading this thread I thought perhaps my sensors were also not quite right. But looking at them, they seem fine! Perhaps the raked stance the Eibach springs have given the car need manual adjustment after all. Front: Rear: Realoem:
	Appreciate 0 Quote

01-16-2018, 12:18 PM	#75
///Mobbin Colonel 1485 Rep 2,672 Posts Drives: m3 Join Date: Jul 2011 Location: Houston iTrader: (3)	So easy to re-attach these arms the wrong way at the end of a suspension install, another car fixed thanks to this thread! __________________ 2021 Alfa Romeo Stelvio Quadrifoglio \| 2.9L \| Trofeo White Tri-Coat \| 8-spd
	Appreciate 0 Quote

12-03-2019, 12:14 PM	#76
NeverL8 Captain 527 Rep 743 Posts Drives: Slow Join Date: Mar 2017 Location: SD iTrader: (0)	Bumping the old thread, anyone fixed their headlights that were pointing too low? I raised mine up with the screw...need it higher but too afraid to over thread the screw and damage something. Any help will be appreciated
	Appreciate 0 Quote

01-11-2020, 10:00 PM	#77
nolaman1970 Private 57 Rep 90 Posts Drives: 2011 BMW M3 E93 Join Date: Feb 2018 Location: Marrero, LA iTrader: (0) Garage List 2011 BMW M3 [0.00]	Thank you, installed eibach springs today and put the rear sensor on wrong. Found this blessing of a thread. 😁
	Appreciate 0 Quote

06-01-2020, 02:04 PM	#78
MPower7 First Lieutenant 98 Rep 384 Posts Drives: 11' e92 M3 Join Date: Apr 2008 Location: SF iTrader: (1)	Fixed my yesterday. Thank you! So much better now.
	Appreciate 0 Quote

01-15-2021, 12:12 AM	#79
Redd Brigadier General 4219 Rep 4,407 Posts Drives: 2010 BMW E92 M3 Dakar Edition Join Date: Jul 2015 Location: Malaysia iTrader: (0)	I just fixed my rear headlight leveling sensor too. The pics are a bit hard to see, so to simplify it: Sensor arm facing inboard (away from spring) = Wrong, headlight aim will be too high Sensor arm facing outboard (toward spring) = Correct
	Appreciate 0 Quote

08-25-2024, 04:40 PM	#80
--Aramis-- Private 124 Rep 85 Posts Drives: M3 Join Date: Aug 2019 Location: France iTrader: (0)	Big Thanks! After suspension install, low beams were too high, i had reinstalled the rear sensor the wrong way Easy fix but it needs to know it
	Appreciate 0 Quote