|
|
05-05-2013, 04:30 AM | #67 |
Captain
553
Rep 815
Posts |
so i got myself a set of 18" TE37SL (pressed graphite) wrapped with Michelin Pilot Super Sports 265/35/18 and 285/35/18 for track use. I decided to go with the PSS cos the track is a 3 hr drive away and I don't wanna lug up semi slicks or make the drive in semi slicks. This way I can still have fun if it rains (it rains here a lot).
IMG_3426 by guytan13, on Flickr Of course, once my LM-Rs were off I started looking at my rusty hubs and decided to do something about them. IMG_3433 by guytan13, on Flickr Bought this wire brush attachment for my dremel and went to work After scrubbing off most of the loose rust IMG_3434 by guytan13, on Flickr sprayed a couple coats of anti corrosion paint (primer grey colour) IMG_3435 by guytan13, on Flickr this is what it looks like with the wheel attached IMG_3436 by guytan13, on Flickr After I did this one hub, i didn't really like the grey colour on the inner hub, so I mounted the next wheel on after removing the rust but without spraying IMG_3437 by guytan13, on Flickr Looks better! However, TODAY after a day of rain all 3 hubs without the paint have started rusting again! Im gonna get some anti corrosion spray in flat black and hope that works out better aesthetically. enjoy some bad iPhone pics after the rain! IMG_3448 by guytan13, on Flickr IMG_3453 by guytan13, on Flickr IMG_3452 by guytan13, on Flickr I'm leaving the rear height as in but gonna lower the fronts just a touch more. no rubbing whatsoever with these wheel and tire specs.
__________________
IG @f80_guy
|
Appreciate
0
|
05-05-2013, 11:05 AM | #68 |
Brigadier General
384
Rep 3,450
Posts |
you live in singapore?
maybe we could meet sometimes when i visit your city,, i'm from surabaya, indonesia.. only 2 hours away.. i love your BBS LM-R set up... that's is sick get LCI taillights. BTW, i always love IB on your M3.. such a great color. Last edited by Jay-K; 05-05-2013 at 11:07 AM.. Reason: adding up positive comments.. |
Appreciate
0
|
05-09-2013, 08:13 AM | #70 |
Captain
553
Rep 815
Posts |
fitted a Bride Zeta III Type L today, excuse the pics, by the time i finished messing around with it, it's dark out.
Untitled by guytan13, on Flickr Untitled by guytan13, on Flickr fitted using the following hardware: Macht Schnell - E9x Competition Liteweight Mounts for Race Seats http://www.gtmotoring.com/product_in...roducts_id=685 Recaro - Slider Track Kit Inside Bar http://www.gtmotoring.com/product_in...roducts_id=690 Recaro - Bucket Seat, Side Mount, Black Steel FIA http://www.gtmotoring.com/product_in...roducts_id=691 Macht Schnell - Seatbelt Receptacle/Harness Mount http://www.gtmotoring.com/product_in...oducts_id=1692 I know it's looking a mess right now with the RECARO and MACHT SCHNELL logos. I've got a full BRIDE mounting kit on order. Unfortunately I assumed the hardware I ordered would fit the BRIDE seat but it doesn't. They were made to fit the RECARO POLE POSITION seat which is a fair bit wider than the BRIDE (430mm vs 395mm). I was unable to fit the RECARO slider as the bar in the middle which you use to slide back and forth was loo long. For the time being I mounted the seat in a fixed position until the proper BRIDE hardware arrives.
__________________
IG @f80_guy
Last edited by E92inSG; 05-09-2013 at 11:08 AM.. |
Appreciate
0
|
05-09-2013, 05:30 PM | #73 | |
Captain
553
Rep 815
Posts |
Quote:
BMW performance seats are nice but nowhere near as secure as these seats. Also I will not be leaving these in permanently on a daily basis as they are a huge pain in the ass to get in and out of. I've got 2 track days this weekend and next. Will be putting the stock seat back after that until the next day
__________________
IG @f80_guy
|
|
Appreciate
0
|
05-10-2013, 09:55 AM | #74 | |
Brigadier General
384
Rep 3,450
Posts |
Quote:
|
|
Appreciate
0
|
05-10-2013, 10:01 AM | #75 |
Lieutenant Colonel
509
Rep 1,570
Posts
Drives: 2013 LRP M3 Coupe
Join Date: Jan 2009
Location: Quincy, MA
|
love the brides and the whole setup
|
Appreciate
0
|
05-12-2013, 07:09 AM | #78 |
Captain
553
Rep 815
Posts |
No I don't recode anything. I just live with the SRS WARNING when the bucket seat is in. It's doesnt affect anything just a little logo of an airbag on the dash. Similar to before I got my EDC coded out.
|
Appreciate
0
|
05-12-2013, 07:54 PM | #79 |
Captain
553
Rep 815
Posts |
Some track videos
http://www.m3post.com/forums/showthread.php?t=839431 |
Appreciate
0
|
05-23-2013, 09:28 AM | #83 |
Captain
553
Rep 815
Posts |
Thanks all!
Some pics from last weekend's ZEROTOHUNDRED'S TIMETOATTACK 2013 - ROUND 1 at Sepang International Circuit. Managed 3rd place in GT cars category. 464637_193800940771609_1302847772_o by guytan13, on Flickr 964836_193807607437609_244948414_o by guytan13, on Flickr 967173_546591828713397_1075354548_o by guytan13, on Flickr 977579_10151630892410552_443656200_o by guytan13, on Flickr 964156_451870538238335_507894262_o by guytan13, on Flickr 981111_451868731571849_1841788663_o by guytan13, on Flickr 976545_451868864905169_845473171_o by guytan13, on Flickr
__________________
IG @f80_guy
|
Appreciate
0
|
05-24-2013, 12:25 AM | #86 |
Captain
553
Rep 815
Posts |
nope didn't find anyone who could get the pads on time so I just used the stock brembo pads for the event.
got a set of Endless pads on order now. won't be hitting the track till July probably Edit: Endless pads arrived but will have to wait for my new rotor rings before I try em out. Decided to go for track day this weekend on stock calipers (see below post)
__________________
IG @f80_guy
Last edited by E92inSG; 06-04-2013 at 11:35 AM.. |
Appreciate
0
|
06-04-2013, 11:33 AM | #87 |
Captain
553
Rep 815
Posts |
Front drilled rotors have started cracking from the track sessions. Decided to play safe and take em off while waiting for replacement slotted rotor rings.
Stock brakes back on for now with pagid yellows, steel hoses and castrol SRF. lets see how they perform on the track this weekend. *note. Anyone thinking of trying pagid yellow on stock calipers beware. These are noisy as fk on the street. I've only had them installed today and already I can't stand the noise. I've heard it's not as bad on multi piston calipers like stoptech or brembos. |
Appreciate
0
|
08-13-2013, 09:57 AM | #88 |
Captain
553
Rep 815
Posts |
some random shots from the track
IMG_0303 by N.A.Z_Photoworks, on Flickr IMG_0299 by N.A.Z_Photoworks, on Flickr IMG_0513 by N.A.Z_Photoworks, on Flickr IMG_0598 by N.A.Z_Photoworks, on Flickr IMG_0835 by N.A.Z_Photoworks, on Flickr
__________________
IG @f80_guy
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|