|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
05-04-2019, 09:21 PM | #1 |
Enlisted Member
8
Rep 31
Posts |
Will this setup work
Hey guys, after a couple years of wanting and dreaming, I picked up my 2013 comp pack m3. Huge plans for it in the upcoming months here including wheels/tires. Im trying to find out if the setup I’m looking to run will work without issues. As much as I’ve researched I couldn’t find the exact setup but from what I see I think it’ll work but probably pushing the limits. So any help would be appreciated. Here’s what I’m looking to run
Front- 19x9.5 et15 with a 255/35 tire Rear- 19x10.5 et12 with a 275/35 tire I plan on being lowered on kw coils about an inch or so |
05-06-2019, 11:36 PM | #3 |
Major General
2738
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
It could be made to work with a lot of camber. Not the specs that I would recommend.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
05-07-2019, 05:26 AM | #4 |
Enlisted Member
8
Rep 31
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|