FS: OEM ZCP and nonZCP E90/E92 M3 Springs

[rbryantaz]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I gathered a couple of sets of M3 springs during the suspension conversion on my 335i that I ultimately can't use with the 335...

ZCP Springs
The first set is a nice set of ZCP springs with no rust. They are X7 fronts and X5 rears. (The X7 marking came off but I am sure they were X7)


asking $150 OBO plus shipping.

Donor info:
Front X7 springs donor vin:WBSWD93569PY43823 E92 (ZCP, DCT, carbon roof) parted after rear end collision at 54k miles (these came with my donor EDC struts).
Rear X5 springs donor vin: WBSPM9C59BE699108 E90 (ZCP, Manual) I bought these specifically to pair up with the fronts, I don't remember the miles but they are a clean set of springs.

These are a good option for a non ZCP car for lowering it 10mm front and rear and stiffening it a bit. It is a good option for someone that wants to lower just a little but not as much as some of the aftermarket kits.

Non ZCP M3 Springs

1 pair of X1 front/X2 rear springs. I don't recall the miles, but they are in good shape with no rust. I got this pair originally before I got the EDC struts...
$75 OBO plus shipping

1 extra set of X2 rear springs. These came with my rear subframe.
$50 OBO plus shipping or $25 if you buy the other set of nonZCP springs. Perhaps these would be useful if someone is cutting a stock set and wants a second try...

Here are the 6 pairs of nonZCP springs, I didn't take a picture of them separately (the white dust on the second rear pair will wipe off, I can do it and take a picture if someone is interested in them):



Reason for having these and selling...

I did a full front strut/upright and rear suspension conversion of my 335i. I drove it with the X7/X5 springs for a month or so but they rode too high with the smaller 335i tire diameter (it made the rear gap about 3/4" too large even with the ZCP springs due to the much smaller diameter rear tire.

Local pickup in Phoenix, AZ (east valley) is available or I can ship for an added cost.

[rbryantaz]

Price lowered to 150 for the ZCP springs and 75 for the normal M3 springs.

Lets get these out of my garage and onto a car.