|
|
09-13-2013, 11:51 PM | #244 |
Second Lieutenant
36
Rep 248
Posts |
Car is an 08 e90 m3. recently put 10mm spacers on my front wheels which are 20x9 ET 28. I'm on lowering springs. The front tires now rub on the fender liner. If anyone could provide help on what to do it would be appreciated. The only things I can think of is either cutting the fender liner or running a smaller tire. The tires are 255/30/20. I thought I would be alright cause I see a lot of people on here running more aggressive front setups than me
|
Appreciate
0
|
09-14-2013, 01:55 AM | #245 | |
Colonel
220
Rep 2,339
Posts |
Quote:
|
|
Appreciate
0
|
09-15-2013, 09:44 PM | #247 |
Second Lieutenant
36
Rep 248
Posts |
|
Appreciate
0
|
09-16-2013, 03:13 PM | #248 |
Private First Class
6
Rep 197
Posts |
|
Appreciate
0
|
09-16-2013, 03:23 PM | #249 |
Colonel
220
Rep 2,339
Posts |
I'm running 255/30 PS2s on the same size and offset wheels without spacers. They are so close that if I put a piece of double stick tape on the firewall side of the fender liner, the tire will rub the tape on full lock. PSS run a little wider than PS2s. With the addition of the spacer, I can see how it would rub. I used to run Vreds in the same size and I can tell you the PS2s are noticeably wider.
__________________
2016 Porsche Cayman GTS - Sapphire Blue / Black Full Leather Interior / Carrera S Wheels
|
Appreciate
0
|
09-16-2013, 03:38 PM | #250 |
Second Lieutenant
36
Rep 248
Posts |
rubbing is pretty severe, it hits the back of the fender liner right after I begin to turn the wheel
|
Appreciate
0
|
09-16-2013, 03:58 PM | #251 |
Private First Class
6
Rep 197
Posts |
Damn, looks like you are gonna have to pull those spacers. A 245/30/20 may not rub but the load rating may not be adequate. It sucks trying to get the perfect fitment. I wanted a 20x9 +17 from WORK but was told it was gonna take 6 months just to get the disk made.
|
Appreciate
0
|
09-16-2013, 04:37 PM | #252 | |
Second Lieutenant
36
Rep 248
Posts |
Quote:
|
|
Appreciate
0
|
09-16-2013, 08:53 PM | #253 | |
Private First Class
6
Rep 197
Posts |
Quote:
|
|
Appreciate
0
|
09-17-2013, 01:45 AM | #254 |
Captain
203
Rep 795
Posts |
Have anyone tried 18" TE37 with everything ZCP stock?
TE37 is 18x9.5 et22 and 8x10.5 et20, probably gonna use 255/265-35-18 front and 275/285-35-18 rear. |
Appreciate
0
|
09-25-2013, 12:21 PM | #255 |
Private
2
Rep 59
Posts |
will this setup work?
2009 e92 lowered on H&R race springs F 19x9.5 ET18 R 19x11 ET22 looking to run 265/30/19 F and R 295/30/19 Michelin Pilot Super sports thinking about switching the rears to 285 to be on the safe side but if 295 will work that would be great as i already have a set available. |
Appreciate
0
|
09-28-2013, 05:31 PM | #256 |
Private First Class
12
Rep 163
Posts
Drives: 2013 BMW M3
Join Date: Jul 2012
Location: Fort Bliss, TX
|
Just had Michelin Pilot Sport A/S 3 installed with 255/35/19 and 275/35/19 combination. I am running stock ZCP and stock rims and there is no rubbing. Took it to full extension in both directions and no rubbing.
|
Appreciate
0
|
10-17-2013, 06:45 PM | #257 |
Admiral
931
Rep 3,886
Posts |
Guys, I am thinking of running 18x10 +25 up front with 275/35/18 NT01's on my E90 with Dinan Stage 1 Suspension.
Any idea if I will rub? I can't seem to find a definitive answer. Thanks!
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
Appreciate
0
|
10-17-2013, 06:53 PM | #258 |
Major General
2739
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
You will be ok but you may need some negative camber in the front (as close to -2 degrees as you can).
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
10-17-2013, 06:56 PM | #259 | |
Admiral
931
Rep 3,886
Posts |
Quote:
Much appreciated!
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
|
Appreciate
0
|
10-17-2013, 08:38 PM | #260 |
-
11817
Rep 23,187
Posts |
major rub.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
10-27-2013, 04:54 PM | #261 |
New Member
0
Rep 20
Posts |
Wanting to go with this set up. Can someone chime in and let me know if I will have any issues. e93 m3 stock suspension but will be adding kw sleeve soon
Wheels dpe sp-sc16 20 x 9 f 20 x 11 r Tires: Nitto invo 255/30/20 f 275/30/20 r |
Appreciate
0
|
10-27-2013, 06:09 PM | #262 |
Lieutenant
26
Rep 513
Posts |
Wheels
Forgestar CF5V Front: 19 x 9.5 et 22 Rear: 19 x 11 et 30 Tires Bridgestone RE-11 Front: 275/30/19 Rear: 305/30/19 No rubbing in the rear, front only rubs on full lock on the back part of the fender liner.
__________________
2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels 2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD |
Appreciate
0
|
11-04-2013, 01:37 PM | #263 | |
Admiral
931
Rep 3,886
Posts |
Quote:
I will likely just purchase some GC Plates for some more negative camber up front as well
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
|
Appreciate
0
|
11-21-2013, 10:55 PM | #264 |
Second Lieutenant
89
Rep 229
Posts |
Anyone know if I will rub with a 12mm spacer on my rear setup, 2011 M3 non zcp with stock EDC suspension with 275 35 19 on Pss?
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|