Sponsored by The Tire Rack

[syli]

I got an absolutely mental deal on a set of Advan ADV05 forged 3pc wheels which were set up on an E63 m6.

The fronts are 19x9 et25 and the rear is 19x11 et30; will I have any issues from a tcu/ecu and handling standpoint running these? I know it's not the most ideal setup, and I've never seen another owner running the same spec, but I have seen that 19x9 et25 fit and that 19x11 et30s fit.

Also, would the fitment be alright with a set of Potenza 255/35/19 fronts and 295/30/19 rears? The tire height has an extremely minor discrepancy so I'm not concerned with the tires, I'm more-so concerned about rubbing.

The car is a 2013 base model vert on stock ride height, but will be on lowering-springs soon.
Any help is appreciated! Thanks in advance!

[DukeofAlexandria]

Originally Posted by syli

I got an absolutely mental deal on a set of Advan ADV05 forged 3pc wheels which were set up on an E63 m6.

The fronts are 19x9 et25 and the rear is 19x11 et30; will I have any issues from a tcu/ecu and handling standpoint running these? I know it's not the most ideal setup, and I've never seen another owner running the same spec, but I have seen that 19x9 et25 fit and that 19x11 et30s fit.

Also, would the fitment be alright with a set of Potenza 255/35/19 fronts and 295/30/19 rears? The tire height has an extremely minor discrepancy so I'm not concerned with the tires, I'm more-so concerned about rubbing.

The car is a 2013 base model vert on stock ride height, but will be on lowering-springs soon.
Any help is appreciated! Thanks in advance!

The 19x11 is going to fuck you. That lowering is going to fuck you even more.

With that rear tire size you'll need to roll your fenders, rather heavily I might add.

People run 18x10.5 sometimes, but even then you need to slightly roll the fender. Can you return them?

-Duke

[drwankel]

I'm not so sure about that. Many people have run a 295 on the stock m359 wheels without spacers (although this is an inappropriate size for a 10" wheel), and had no issue at stock ZCP ride height.

I'm actually having 19x10+25s and 19x11+25s installed 275/30/r19 front 295/30/r19 rear on Thursday.

Multiple reports say this should not rub on stock zcp suspension.

I'll report back on thursday and confirm/deny if that is accurate.

[DukeofAlexandria]

Originally Posted by drwankel

I'm not so sure about that. Many people have run a 295 on the stock m359 wheels without spacers (although this is an inappropriate size for a 10" wheel), and had no issue at stock ZCP ride height.

I'm actually having 19x10+25s and 19x11+25s installed 275/30/r19 front 295/30/r19 rear on Thursday.

Multiple reports say this should not rub on stock zcp suspension.

I'll report back on thursday and confirm/deny if that is accurate.

295 on stock wheels isn't the issue, the lowering springs are what's going to F him.

On 19x11, they still might rub a bit on the back.

-Duke

[drwankel]

Again- multiple reports that 19x11+25 with a 295/30 does not rub on ZCP suspension. Cannot speak to a +30 though. Will report back on Thursday to confirm/deny. Have a very interesting project finally wrapping up that I think alot of folks will be interested in.

[Throatpunch]

I had 19x11 with 295/30/19 hankook v12 and it didnt rub at all on my e93. I forget the offset but it might have been +25

Im in h&r springs too
You might actually need a spacer

[DukeofAlexandria]

Originally Posted by Throatpunch

I had 19x11 with 295/30/19 hankook v12 and it didnt rub at all on my e93. I forget the offset but it might have been +25

Im in h&r springs too
You might actually need a spacer

Huh....I've tried that combo and mine rubbed....making me rethink what springs I have on my car now.....

-Duke

[Throatpunch]

I just bought bbs lm and the rear is 19x11 +25 and im hoping no issues with a 275/35/19 tire… im currently on 19x10.5 +22 on this tire and it doesn't rub

[Throatpunch]

https://www.m3post.com/forums/showthread.php?t=1132368
Here is an e93 with no rub too

[drwankel]

Originally Posted by Throatpunch

I just bought bbs lm and the rear is 19x11 +25 and im hoping no issues with a 275/35/19 tire… im currently on 19x10.5 +22 on this tire and it doesn't rub

You should be able to go all the way to a 295/30 without rubbing on a 19x11 +25

[Throatpunch]

Originally Posted by drwankel

You should be able to go all the way to a 295/30 without rubbing on a 19x11 +25

Right i have done that but this i think is a slightly taller tire?

[drwankel]

Originally Posted by Throatpunch

Right i have done that but this i think is a slightly taller tire?

Actually, a 265/35/19 is almost the exact same height as a 305/30/19. Using this you know that a 275/35/19 is going to be taller than a 295/30/19.

[Throatpunch]

Thats my worry that it is too tall

[Camnyc]

18x11 final et30 with 295/35/18 and no rub out back.

The 19x11 et 30 with a 295/30/19 out back will be fine with a moderate drop and a touch of camber. The paint where the quarter and bumper meet is where you are likely to get a little touch if anything, easy enough to either trim the plastic liner away at that point or let it clearance itself.

[syli]

Originally Posted by DukeofAlexandria

The 19x11 is going to fuck you. That lowering is going to fuck you even more.

With that rear tire size you'll need to roll your fenders, rather heavily I might add.

People run 18x10.5 sometimes, but even then you need to slightly roll the fender. Can you return them?

-Duke

I got around to mounting them this weekend and the fitment was perfect. No rubbing all around whatsoever.

[DukeofAlexandria]

Originally Posted by syli

I got around to mounting them this weekend and the fitment was perfect. No rubbing all around whatsoever.

Yeah, that looks like stock ride height. You said it would be lowered and that does not look lowered in the slightest…sooo….

-Duke

[Throatpunch]

Originally Posted by DukeofAlexandria

Yeah, that looks like stock ride height. You said it would be lowered and that does not look lowered in the slightest…sooo….

-Duke

Like i said i ran 19x11 295/30/19 on hr springs and had zero rub

[North.E92]

19x11 et30 will actually get you the most tire/clearance. You can easily run 295/30 with out rubbing. It’s the low offset like 21 that you can’t get away with meaty tires in the rear. I’m also running 19x11 pretty slammed on coils and don’t have any rub with 2 people in the back or during hard driving over dips etc. 100% those wheels will easily fit your car with out any fitment issues.

[Ninohale]

Originally Posted by North.E92

19x11 et30 will actually get you the most tire/clearance. You can easily run 295/30 with out rubbing. It’s the low offset like 21 that you can’t get away with meaty tires in the rear. I’m also running 19x11 pretty slammed on coils and don’t have any rub with 2 people in the back or during hard driving over dips etc. 100% those wheels will easily fit your car with out any fitment issues.

Good to know.

Just picked up 19x11 et31 rears and plan on going 285/30/19. I'm on the MSS HAS kit so I can dial it in a bit (but not much).