FS: E92 M3 Race/Track Car

[jvitas]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

SOLD!

I've decided to sell my 2009 M3 and move on to another project car.

This M3 coupe is an extremely well sorted car built under the guidance of James Clay, Owner of BimmerWorld (BW). Professionally repainted in 2014. Interior gutted including door windows and operators. Interior painted white. Approximately 20,000 mi (14,000 street mi). 3160 lb empty. NASA GTS series potential.

Engine:
• Stock 4.0L V-8 with Epic Motorsport tune
• Modified Macht Schnell Stage 2 air intake and cone filter
• BW A/C compressor delete
• EVOsport under drive pulleys
• BW power steering reservoir
• BW oil dip stick kit
• OPTIMA battery
• BW modified BMW rod bearings

Transmission and drive train:
• Stock DCT 7 speed with paddle shifters
• Stock differential 3.15 ratio

Exhaust:
• BW cat delete pipes
• AA X-pipe
• Magnaflow Exhaust

Suspension:
• Front - MCS double adjustable dampers (new 2015) with Moton remote reservoirs and Hyperco 1000# coil over springs
• Ground Control adjustable camber/caster plates
• Rear – Moton double adjustable dampers (rebuilt 2014) with remote reservoirs and Hyperco 750# true coil over springs
• TMS solid aluminum sub-frame bushings
• BW solid differential bushings
• BW precision front lower control arm bearings
• BW rear camber arm bearing kit
• RD Sport front and rear sway bars
• BW adjustable rear wishbones (camber adjust)
• BW spherical rear guiding links
• BW adjustable rear toe arm links
• BW trailing link bearings

Brakes:
• Stop Tech STR-40GT Billet Aluminum Trophy endurance front calipers. 38-44 bore. 378x35 slotted floating rotors
• Stop Tech ST40 Forged Aluminum Race rear calipers. 28-30 bore. 355x32 slotted floating rotors

Wheels:
• D-Force LTW5 18”x9.5” ET +35 aluminum wheels, 6 used
• 12mm wheel spacers
• MSI Racing 14mm custom race bullet nose wheel studs
• BMW stock 19” wheels and street tires

Body:
• BW CF race front splitter/undertray with brake cooling ducts
• BW CF whiskers
• BW CF headlight blanks
• BW CF trunk lid
• Aeromotions rear wing
• BW tow strap

Interior:
• BW installed 8-point roll cage
• Racetech 4009WTHR race seats, driver and passenger with sliders
• Schroth Profi II 6-point harnesses, driver and passenger
• MOMO quick release steering wheel hub
• Aluminum floor plates

Priced at $78,000

Car located in Milwaukee, WI

[TTO898]

That rear wing!
GLWS

[jvitas]

Bump.

[jvitas]

Bump.

[magnetic1]

in for lowball at 50 :P bump.

[warp10]

Off topic but can you send info on the quick release steering wheel hub with the paddles. Sweet build also.

[jvitas]

Yep, that's a low ball.

[jvitas]

Originally Posted by warp10

Off topic but can you send info on the quick release steering wheel hub with the paddles. Sweet build also.

Thanks.

The paddles are on the stock steering wheel. The steering wheel is mounted on the QR using an adapter I made up. Went to a local junk yard and found a wrecked E36 that had a damaged steering column. They let me remove the steering wheel and then they cut off the last two inches of the steering shaft with the male spline using a torch. A friend machined the torch cut end of the spline and welded it to a 1/8" disc with bolt holes that match the QR hub.

I bought a six conductor coil cord and spliced the coil cord wires to the paddle wires and to the connector that attaches to the slip rings in the column. That connector is the one in the steering wheel.

[warp10]

^Thanks

[jvitas]

Price reduced to $70,000.