|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
02-27-2021, 03:44 PM | #1 |
MidnightM3
39
Rep 211
Posts |
I'm doing a fair bit of enhancements right now as the car goes into its next stage of ownership. One of those enhancements is refreshing the front end, so I was researching how to mount the Hard Motorsports Splitter and if the chassis mounts they sell (which appear to be a weak option alone without splitter rods/shocks providing added support) would work with my setup. That is will it work with a Deansbimmer Undertray and ESS Supercharger (intercooled kit)? No one seems to make a good chassis mount option for the E9X platform, and I'm not certain if any are compatible with my setup.
I can't seem to find anything on this topic and felt this might be the best place to get some guidance. Also what is the preferred/recommended mounting point and size of the splitter rods/shocks, if I'm only planning to run 2? Last question here, I ordered a Fall-Line Motorsports DCT Pan, but am also replacing the DCT side pan as well. Is there a good side pan option for the DCT or is OEM just fine? Thank you in advance.
__________________
BMW ESS SC E92 M3 DCT
|
02-28-2021, 07:34 AM | #3 |
Lieutenant Colonel
517
Rep 1,730
Posts |
I haven't heard great reviews of the hard splitter, mainly how prone to deflection it is. You might be better off just building one yourself
__________________
2018 Grigio Telesto F80 M3 DCT | :: Bone Stock :: 2004 Titanium Silver E46 M3 6 Speed | :: Track Car :: |
Appreciate
0
|
03-03-2021, 09:58 AM | #4 |
Captain
1564
Rep 672
Posts |
Are you going to the track or just want a splitter for looks? I would recommend building something custom, or doing something easy and nice looking like the GTS lip/splitter combo.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|