FS: F A G Front Wheel Bearings x 2 for E9X M3 or 1M

DR-JEKL · 10-28-2018, 05:55 PM

Long story but thought I'd had a blown bearing, as I was getting vibration turning right when loading up the steering on long sweeping bends. turned out I just had loose control arm nut...

Lots of guys with high mileage vehicles state that replacing the front bearings makes a drastic difference, especially if you do a few track days and run decent camber. My front bearings have done about 50000 kays so should be good for a while yet but for thos eguys with 100000+ kays fresh bearings may help!

An easy DIY with only 4 bolts to remove once the wheel is off:

Capitalise on my diagnosis error!

Price: $500 ($600 delivered from ECS)

Location Newcastle NSW

DR-JEKL · 05-01-2022, 05:19 AM

BUMP!

10-28-2018, 05:55 PM	#1
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	FS: F A G Front Wheel Bearings x 2 for E9X M3 or 1M Long story but thought I'd had a blown bearing, as I was getting vibration turning right when loading up the steering on long sweeping bends. turned out I just had loose control arm nut... Lots of guys with high mileage vehicles state that replacing the front bearings makes a drastic difference, especially if you do a few track days and run decent camber. My front bearings have done about 50000 kays so should be good for a while yet but for thos eguys with 100000+ kays fresh bearings may help! An easy DIY with only 4 bolts to remove once the wheel is off: Capitalise on my diagnosis error! Price: $500 ($600 delivered from ECS) Location Newcastle NSW Attached Images
	Appreciate 0 Tweet Quote

05-01-2022, 05:19 AM	#2
DR-JEKL Major General 898 Rep 6,285 Posts Drives: Space Grey E92 335i 6MT Join Date: Jul 2012 Location: Newcastle Ozstraylia iTrader: (3)	BUMP!
	Appreciate 1 Ashley_rj31.00 Quote