|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
06-25-2012, 08:16 AM | #1 |
Private First Class
32
Rep 121
Posts
Drives: G80 M3Cx, 991.1 GT3
Join Date: May 2012
Location: Chattanooga, TN.
iTrader: (2)
Garage List 2016 Porsche GT3 [0.00]
2022 M3Cx [0.00] 2013 F30 [0.00] 1971 BMW 2002 [0.00] 1995 M3 [0.00] 2008 BMW M3 [0.00] |
Tire Sizing: 285/35/18 square?
Anyone have success running:
Hankook RS3 18x10 (ET20) 285 35 18 I was going to run these square, but was wondering if I would have issues in the front.
__________________
|
06-25-2012, 08:47 AM | #2 |
Major General
2760
Rep 5,483
Posts |
Based on my experience with the 315/30-18 Hoosier (shorter at 25.6" vs. 25.9", but wider by quite a bit) , they'll probably rub a little on the fender liners. There's a ton of space with the right height, but the wrong height is a killer. I know there are a few people who have used the 265/30-19 Hoosier on the front and they rub because of the height, width is fine. Plenty of room for a 285/30-18. Sucks because most of the 18xwide street tires are made for cars that came with taller tires from the factory
__________________
Last edited by Richbot; 06-25-2012 at 09:00 AM.. |
Appreciate
0
|
06-25-2012, 09:01 AM | #3 |
Private First Class
32
Rep 121
Posts
Drives: G80 M3Cx, 991.1 GT3
Join Date: May 2012
Location: Chattanooga, TN.
iTrader: (2)
Garage List 2016 Porsche GT3 [0.00]
2022 M3Cx [0.00] 2013 F30 [0.00] 1971 BMW 2002 [0.00] 1995 M3 [0.00] 2008 BMW M3 [0.00] |
Thanks for the info.
I will order them up and keep an eye on the liners.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|