Anyone sell the oem style exhaust connectors

[Down_Shift]

Does anyone know of a company sells the exhaust connectors that mate the rear section to the xpipe? It's the section that requires the two larger clamps.

Are there any other options out there other than cut and weld or using a butt joint?

[SAMM3Y]

You can try a split flange (you'll need 4) , you'll need some sealer too..

[M43S7RO]

You need the actual piping or the clamps?

[nycplumber]

Originally Posted by M43S7RO

You need the actual piping or the clamps?

Probably both. I could use them too actually

[Down_Shift]

Originally Posted by nycplumber

Probably both. I could use them too actually

The clamps are easy. They're about $30/40 each at the dealer. But the bell flange sections I've never seen.

[pbonsalb]

They are ball and socket flanges. Like these:

https://www.amazon.com/Hedman-21153-.../dp/B00J9KN10S

[M43S7RO]

Is it for an akra? RKP makes the adapters to mate the akra xpipe (straight pipe ends) to oem style rear mufflers with bell style ends on the pipes.

https://www.m3post.com/forums/showthread.php?t=944004

Searching web, seems they are no longer made.

[Down_Shift]

Originally Posted by pbonsalb

They are ball and socket flanges. Like these:

https://www.amazon.com/Hedman-21153-.../dp/B00J9KN10S

Yes but no.

They are ball style but use clamps. The posted ball style are also smaller than what we use. I would almost say ours are oval style lol.

So no leads? I'm either going to cut up a spare exhaust and xpipe I have here or convert to just pipes and lap joints. I love how the oem ones give you some space to play without having to drop the entire exhaust.