![]() |
|
|
| 06-30-2025, 09:18 AM | #1 |
|
Private
![]() 230
Rep 110
Posts |
BBS LM 18-19 conversion step lip
Considering selling my custom BBS LM setup. I had these initially on my old E46 330i daily, they used to be 18x8 and 18x9. I then got this E91 as my newtome daily driver and I wanted to run them on this. So I converted them to three-piece and stepped up the wheels to 19 inch, where the fronts are now sized at 19x9 and the rears are at 19x10. These are as close of spec that you can get to 359M or 437M (do your research on offset). But I can tell you that these will fit on various different chassis with no problems (any E9X non M or M car), F3X or F8X. I am currently running a 225/40/19 and 255/35/19 with slightly rolled and pulled rear fenders with no issues I’ve had this on my daily driver as my set up for the past 25,000 miles with zero issues. Confident there isn’t another set in existence alike that will fit as perfectly for a E9X non M car for the money. Considering you need to purchase a $3,000 set of wheels only to use the faces in order to just get started to replicate this setup. - brushed face/polished lips - rebuilt with new barrels, lips and hardware roughly 2.5 years ago. - barrels and lips were welded for extra reinforcement - faces were machined to be reverse mounted and to fit larger M8 hardware $7,000 no tires $8,000 with Michelin PS4S Fronts have 10k miles and are still in great shape. Rears have 350 and were just replaced a week ago. Will ship on buyers expense. WILL ALSO TAKE TRADES PARTS NEEDED - Recaro Pole Position (pref in red) - Ohlins Dedicated Track, MCS, Nitron for E9X M3 |
| 06-30-2025, 10:28 AM | #4 |
|
Private
![]() 230
Rep 110
Posts |
face’s are + 40. obviously you lose a little of that when they are reverse mounted. i’d probably say closer to the +30 mark.
Last edited by haile90; 06-30-2025 at 10:32 AM.. |
|
Appreciate
0
|
| 08-02-2025, 12:56 AM | #8 |
|
Enlisted Member
![]() 19
Rep 41
Posts |
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
| Thread Tools | |
|
|