|
|
07-29-2017, 02:41 PM | #1 |
Captain
379
Rep 875
Posts |
eas too big to care
Back in June I had my battery replaced at eas. The car had coding on it previously, but I was never informed that any coding loss would occur from the registration process (could have easily restored while re-registering battery I'm sure). When brought to the attention of Kevin, he said he would ask management about helping me out.
After 3 weeks of no contact I reach back out to Kevin and he tells me I need to pay full price to code a few items. Tom tells me the same and then stops responding. As a tuner specialty shop, and also knowing going in that electronic work was being done I feel they should have informed me of such. I've had my car at eas for cosmetic work, mechanical work, some oil changes on multiple occasions, but the principle and their conduct of my last experience was unacceptable. Just shows me they're too big to care. That's fine, as a consumer I won't support them with my business anymore, but I think it should be known that eas isn't the only shop in town. Good luck with your business model in the future eas, when you fail on faithful customers you only fail yourself in the long run. |
07-29-2017, 04:26 PM | #2 |
Admiral
930
Rep 3,886
Posts |
That's a bummer. Would have been more beneficial for them to simply offer you the coding services which you previously paid for complimentary, or at the very least at a discounted rate, rather than losing your business all together.
As an alternative solution, I recommend Alex@Alpine for all coding services. He does everything remotely after shipping you the OBD2 cable. His prices are cheaper than EAS and the added convenience of not having to leave your home is a big plus! Cannot agree more with this statement. Not in regards to EAS specifically, but to businesses in general.
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
Appreciate
1
cenix379.00 |
07-29-2017, 05:27 PM | #3 | |
General
63031
Rep 24,597
Posts |
Quote:
If I may ask you ..What kind of coding have you lost ? And is this normal that you lost your coding with the registration of your battery ?
__________________
"MAX VERSTAPPEN" IS THE 2021+2022+2023 F1 WORLD CHAMPION - #UnLeashTheLion
BPM DEV-Tune & DCT Software-Tune & Servotronic & coding ///Alpine HID Angeleyes ///Oem.exhaust mod. |
|
Appreciate
1
cenix379.00 |
07-29-2017, 11:04 PM | #4 | ||
Admiral
930
Rep 3,886
Posts |
Quote:
__________________
2020 FORD RAPTOR 2014 F15 X5 | M-SPORT SOLD 2011 SG E90 M3 | 2008 AW E90 M3 | 2004 E46 M3 |
||
Appreciate
2
cenix379.00 ///M Power-Belgium63031.00 |
07-30-2017, 12:04 AM | #5 | ||
Captain
379
Rep 875
Posts |
Quote:
Quote:
--folding mirrors/closing windows/sunroof via keyfob --Euro double hazard blinkers (not important to me) --long press key eject car shutdown --auto windows up/down even with door open I also had Euro MDM, seat belt chimes off, and DVD in motion, and those features are still there. I appreciate the support. |
||
Appreciate
1
///M Power-Belgium63031.00 |
07-30-2017, 12:09 AM | #6 |
Major
403
Rep 1,171
Posts |
You can code most of that with icarly. You can use mine if you want. I'm by lax and oc sometimes.
|
Appreciate
2
cenix379.00 ///M Power-Belgium63031.00 |
07-30-2017, 12:13 AM | #7 |
Captain
379
Rep 875
Posts |
|
Appreciate
1
///M Power-Belgium63031.00 |
07-30-2017, 06:43 AM | #8 | |
General
63031
Rep 24,597
Posts |
Quote:
I wonder with my BPM tune and DCT software upgrade and I have some coding too . DCT software upgrade is done via remote coding cable..
__________________
"MAX VERSTAPPEN" IS THE 2021+2022+2023 F1 WORLD CHAMPION - #UnLeashTheLion
BPM DEV-Tune & DCT Software-Tune & Servotronic & coding ///Alpine HID Angeleyes ///Oem.exhaust mod. |
|
Appreciate
1
cenix379.00 |
07-30-2017, 10:18 AM | #9 |
Captain
379
Rep 875
Posts |
I have the Dinan ECU tune and that was not affected by the battery replacement. My car is 6 speed manual, so I'm unsure about the DCT software upgrade, but hopefully it will remain much like the Euro MDM did.
|
Appreciate
1
///M Power-Belgium63031.00 |
07-30-2017, 10:28 AM | #10 |
General
63031
Rep 24,597
Posts |
Let us hope.Thank you for the information
__________________
"MAX VERSTAPPEN" IS THE 2021+2022+2023 F1 WORLD CHAMPION - #UnLeashTheLion
BPM DEV-Tune & DCT Software-Tune & Servotronic & coding ///Alpine HID Angeleyes ///Oem.exhaust mod. |
Appreciate
1
cenix379.00 |
07-30-2017, 09:13 PM | #11 |
Major
1123
Rep 1,083
Posts |
I had my car tuned as well as coded by BPM, and when I had my battery replaced last year, a local shop registered the battery for me.
I've never heard that registering a new battery can affect coding.
__________________
|
Appreciate
2
cenix379.00 ///M Power-Belgium63031.00 |
07-30-2017, 11:00 PM | #12 |
Captain
379
Rep 875
Posts |
I didn't think getting a replacement battery with the same specs as stock required re-registration either, but this is what EAS told me.
|
Appreciate
1
///M Power-Belgium63031.00 |
07-30-2017, 11:09 PM | #13 | |
Major
1123
Rep 1,083
Posts |
Quote:
Even if you change from one battery to another of the same type, if one has more amp/hour capacity than the other, then recoding is needed. The maps are also different for batteries with different amp/hour ratings. If you don't register your battery, it's likely you'll keep getting this Battery Discharged warning on iDrive.
__________________
|
|
Appreciate
2
cenix379.00 ///M Power-Belgium63031.00 |
07-31-2017, 06:29 PM | #14 |
Save the manuals!
6012
Rep 6,740
Posts |
Battery registration will NEVER affect coding. There is no reason for it to if the registration is done correctly. It's evident whoever did your battery registration at EAS did not know what they were doing. This is 100% on them.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
2
cenix379.00 ashtaron141123.00 |
07-31-2017, 06:52 PM | #15 |
Captain
379
Rep 875
Posts |
Thanks for the info. Well now, this makes me even more dissatisfied with the treatment I received.
|
Appreciate
0
|
08-01-2017, 06:22 PM | #16 |
Brigadier General
569
Rep 3,742
Posts |
If you're looking for a shop in OC for future work, look no further than MRF Engineering, IMO.
He can also arrange tuning or coding at his shop through the provider of your choice (e.g., BPM Sport, Alex @ Alpine, etc.). |
Appreciate
1
cenix379.00 |
08-02-2017, 12:11 PM | #17 | |
Captain
379
Rep 875
Posts |
Quote:
UPDATE: I had my functions restored by a fellow member whom I did not know previously, thanks msan. It's sad and awesome at the same time that the shop that I've spent thousands of dollars at over the last couple years would not take the time to restore 4 coded items which literally took 5 minutes, yet a complete stranger would take a moment out of his day to help another M3 owner for nothing. |
|
Appreciate
7
|
08-02-2017, 01:00 PM | #18 |
Private
15
Rep 69
Posts |
This happened to me as well about two yrs back. I contacted eas about registering a battery for ~$50-60.
On my apt date, they told me I'd lose all my coding and they'd have to charge me ~$100ish to recode. I agreed, paid, and moved on with my life. they failed to code my car correctly, (NON Lci -> LCI tails). I ended up buying a carly and app and promised myself to never come back. |
Appreciate
2
cenix379.00 HomoPirate84.00 |
08-02-2017, 03:43 PM | #19 |
Colonel
765
Rep 2,361
Posts |
Since when does registering a new battery will cause you to lose coding? I've done it twice on the M3 when chasing an electrical problem and I replaced the battery twice to eliminate that probability.
I replaced the stock battery on the X5M as well. No coding was lost. As a matter of fact, updating the I-level on both cars did not cause a loss of coding features too |
Appreciate
1
cenix379.00 |
08-03-2017, 12:37 AM | #20 |
Captain
379
Rep 875
Posts |
I think irregardless of whether you lose coding or not during a battery re-registration process, I believe it's quite clear that there IS a way to get it done without losing one's existing coding.
EAS chooses to do it their way which is beneficial to them financially because if you lose your coding it's an automatic sale for them to recode. They did it to one member who previously posted, 2 years ago, and they tried to do that to me 2 months ago. If they're such a cutting edge, service based enthusiast shop, you would hope they wouldn't try to get away with these things at the expense of their client base, which is quite big. |
Appreciate
0
|
03-17-2018, 12:33 AM | #21 |
Lord Scrip
1812
Rep 3,012
Posts
Drives: 2011 M3 Coupe
Join Date: Jan 2012
Location: LA,Ca
|
So I replaced my battery myself and registered it myself with my KD-can cable. I did not lose any coding. I have custom coding in FRM, CIC, COMBOX, ABG, CAS AND KOMBI. My only thought for your experience is too much time passed between battery removal and new battery hookup. I do not believe the ECU's in the car have NVRAM. So if power is gone too long the 1's and 0's become decayed, undefinable and ultimately corrupt. Hence default based off VO afterwords.
__________________
|
Appreciate
1
cenix379.00 |
03-18-2018, 02:18 PM | #22 | |
Captain
379
Rep 875
Posts |
Quote:
1. They were not aware of the facts/events that would cause coding to be lost in battery replacement, or, 2. They knew about this and tried to make an extra $100 on the "backend" because they think you have no choice. Both of which would indicate an incompetent shop or an unscrupulous/shady one. I'm inclined to say it is option #2. Let me say though, my comments are strictly limited to their sales and management/ownership staff because their mechanics who are doing the actual hands-on do good and clean work from my past experiences with them. My issues are not from any actual work done on the car, but their poor business practices. Thumbs down to EAS sales and ownership. |
|
Appreciate
1
6ixSpd6011.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|